机动目标运动数学模型评述

近十几年来,人们对机动目标的跟踪问题进行了大量研究。问题的核心是如何建立机动目标运动的数学模型。本文主要对现有的空中机动目标的数学模型进行评述和比较研究。     

坐标系与纯角度目标跟踪

纯角度目标跟踪问题一般包括二维纯方位跟踪和三维纯角度跟踪两种情形,其特性与所选用的坐标系有关。广泛采用的坐标系是直角坐标系(二维或三维)、极坐标系(二维)和球坐标系(三维)。本文分别在直角坐标系和改进的极坐标系下建立了二维系统模型,并进行了性能分析,指出了后者的优越性。在三维情况下,作了类似工作。最后还以二维问题为例,建立了机动目标跟踪的直角坐标模型和改进的极坐标模型。     

Determination of burn‐in parameters and residual life for highly reliable products

Today, many products are designed and manufactured to function for a long period of time before they fail. Determining product reliability is a great challenge to manufacturers of highly reliable products with only a relatively short period of time available for internal life testing. In particular, it may be difficult to determine optimal burn‐in parameters and characterize the residual life distribution. A promising alternative is to use data on a quality characteristic (QC) whose degradation over time can be related to product failure. Typically, product failure corresponds to the first passage time of the degradation path beyond a critical value. If degradation paths can be modeled properly, one can predict failure time and determine the life distribution without actually observing failures. In this paper, we first use a Wiener process to describe the continuous degradation path of the quality characteristic of the product. A Wiener process allows nonconstant variance and nonzero correlation among data collected at different time points. We propose a decision rule for classifying a unit as normal or weak, and give an economic model for determining the optimal termination time and other parameters of a burn‐in test. Next, we propose a method for assessing the product's lifetime distribution of the passed units. The proposed methodologies are all based only on the product's initial observed degradation data. Finally, an example of an electronic product, namely contact image scanner (CIS), is used to illustrate the proposed procedure. © 2002 Wiley Periodicals, Inc. Naval Research Logistics, 2003     

A model for step‐stress accelerated life testing

Modern technology is producing high reliability products. Life testing for such products under normal use condition takes a lot of time to obtain a reasonable number of failures. In this situation a step‐stress procedure is preferred for accelerated life testing. In this paper we assume a Weibull and Lognormal model whose scale parameter depends upon the present level as well as the age at the entry in the present stress level. On the basis of that we propose a parametric model to the life distribution for step‐stress testing and suggest a suitable design to estimate the parameters involved in the model. A simulation study has been done by the proposed model based on maximum likelihood estimation. © 2003 Wiley Periodicals, Inc. Naval Research Logistics, 2003     

正畸力作用下微种植体支抗的应力分析

通过建立直径为1.4,1.6,1.8 mm,长度为6,8,10 mm,螺纹深度为0.2 mm,螺纹间距0.5 mm的Ti质微种植体支抗与颌骨有限元模型,研究在常用载荷1.96 N正畸力与微种植体长轴呈45°,60°和75°三种角度时的Ti质微种植体应力分布和大小。分析得出,应力主要集中在微种植体颈部1 mm内,在其颈部1.2 mm的范围内应力值的衰减都很明显,在颈部1.2 mm的范围内曲线较陡。在设定的加载条件下,不同直径的微种植体应力值呈规则的变化趋势,直径1.8 mm,45°时微种植体的各应力值极值最小。微种植体长度对应力的影响不大,位移变化均较小。     

一种基于粒子滤波的水下地形匹配算法研究

引入了剩余重采样的概念,通过权值分类和剩余权值重采样两个步骤完成粒子的复制,提高了运算速度.使用三次样条插值的方法对深度数据进行插值,构建了湖泊水下数字高程模型.通过仿真证明了该算法的可行性,并分析了匹配误差与水下地形的关系.     

海战场时空查询及索引机制研究

针对目前海战场信息系统的不足,引入时空数据技术对战场数据建模,并支持设计了海战场时空数据库原型系统.对系统要求的时空查询问题进行归纳,结合海战场数据特性加以分析,为后续的索引建立提供了依据.3D R-tree相较现有的其他时空索引更适用于海战场的环境,并通过扩充部分的弥补了其检索效率的不足.     

捷联惯导系统快速自对准误差模型的建立

通过对惯性制导系统两个基本方程的研究,求出了各状态矢量在各坐标系下的微分方程,然后以ψ角法所确立的平台为基准,分别推导得出惯性制导系统各主要状态的微分方程,从而建立了捷联惯性制导系统的误差模型.最后根据静基座捷联惯导系统初始对准的特点对其进行简化,得到了静基座捷联惯导系统快速自对准的误差模型.     

装甲车辆发动机汽缸套与活塞环磨损计算模型

为研究装甲车辆发动机汽缸套与活塞环的磨损规律,在总结汽缸套与活塞环磨损计算理论的基础上,通过黏着机理磨损的计算和分析,对基于润滑分析磨损模型、基于瞬态过程理论磨损模型和通用磨损模型3种典型模型的建模思路、求解方法和计算误差等内容进行了比较,确定基于润滑分析的磨损模型作为装甲车辆汽缸套与活塞环磨损研究的计算模型。     

一类非正态误差下的AR模型定阶研究

对一类非正态误差的AR模型,在待定阶数P的情况下,给出误差项中未知实函数依概率有界的定理,可把非正态误差转化为正态情况。最后运用正态误差下AR模型的方法确定阶数和参数,并给出一个算例。