基于FEM/SPH算法的弹丸侵彻土体数值模拟

基于有限元法(FEM)和光滑粒子流体动力学(SPH)结合的算法,用数值模拟了钢质弹丸对钢筒约束土体的侵彻过程。基于ANSYS/LS-DYNA显式动力分析和LS-PrePost后处理软件,形象再现了钢质弹丸冲击作用下土体飞溅形成漏斗坑和直线通道的物理过程。侵彻深度计算结果与实验数据吻合较好,钢质弹丸的速度和加速度时程曲线图与理论分析一致,体现了FEM/SPH算法的精确性。研究结果表明FEM/SPH算法在模拟侵彻土体方面具有可行性和有效性。     

相控阵雷达外场试验目标模拟技术

针对传统雷达回波模拟技术模拟目标态势单一、建设成本高、灵活性差等缺陷,结合相控阵雷达快速波束定向的扫描特点,提出了一种基于射频存储转发技术和移动阵列平台的相控阵雷达外场试验目标模拟方法。该方法采用射频空间辐射注入的方式为雷达提供较为逼真的三维空间模拟目标回波信号和构建较为复杂的模拟目标场景态势,能够支持包括雷达天线在内的整个雷达系统进行模拟试验或训练。最后通过实例仿真验证了该方法的有效性和可实现性。     

N2O/C7H8单喷嘴燃气发生器试验研究

以基于N2O/C7H8的燃烧驱动混合型气动CO2激光器点火试验为研究背景,设计了液态N2O供应系统及N2O/C7H8单喷嘴燃气发生器.对液态N2O供应系统、N2O/C7H8的点火及燃烧性能进行了研究.试验结果表明:设计的N2O供应系统能够实现液态N2O的稳定供应;在设定的时序下,两个设计工况(余氧系数分别为0.3和0....     

对地形跟随/回避雷达干扰的可行性研究

在介绍地形跟随/回避雷达工作原理的基础上,通过设定典型超低空突防飞机的战术行动,分析了对雷达实施有效干扰所必须具备的条件,包括侦察/干扰机的部署、数量要求等;并计算了在传感器/摆放(投掷)式干扰机模式下对装备的性能要求,得出了在目前技术条件下,对地形跟随/回避雷达实施干扰在技术和战术上都是困难的.     

射频识别系统的多目标识别-反碰撞算法

对多目标识别技术的二进制搜索算法、时隙ALOHA算法进行了剖析,并对ALOHA算法用概率论和数理统计的方法进行了深入的理论分析,得出要根据所设计的射频识别系统的特点合理采用各种算法方可得到良好的效果.该算法的实现对提高高速公路上自动收费系统、人员和物流管理等各领域的工作效率具有一定的指导意义.     

一体化射频通信体系对抗的仿真系统设计

简要介绍了射频通信体系对抗仿真中的模型,一体化建模方法.以红方对蓝方通信进行干扰为例分析了通信体系对抗仿真的功能模块,提出了对抗框架.介绍了几种常用的干扰方法,提出对抗的方法和策略,并通过实例说明通信体系对抗的方法和策略.     

基于在线学习的频谱感知次序策略*

认知无线电允许次级用户在频谱没有被主用户使用时动态地接入频谱进行数据传输。动态频谱接入是解决无线电频谱资源短缺和使用效率低下问题的有效方案,而频谱感知是实现动态频谱接入的关键挑战之一。次级用户的感知能力有限,为了快速找到频谱空闲概率最大的频段从而获得更多的频谱接入机会,研究了频谱感知次序问题。考虑到频谱空闲概率会随时间变化且对次级用户不可知,提出了一个在线学习框架,把频谱感知次序问题规约成经典多摇臂赌博机问题,并利用在线学习方法——满意折现汤普森抽样算法(satisficing discounted Thompson sampling)处理优化问题。仿真结果表明,和其他算法相比,所提算法可获得更多的频谱接入机会并且能够跟踪频谱空闲概率的变化。     

Damage assessment of the target area of the island/reef under the attack of missile warhead

Under the background of vigorously developing facilities of island/reef in the world, the economic value and strategic significance of the island/reef have become increasingly important. Unfortunately, they may easily become the attacking target of missiles in the war time. Therefore, aiming at the damage quantification of the targets in the island/reef under the missile attacking, a macroscopic damage assessment model for the target area is proposed in this paper. The model focuses on the construction of the assessment model framework. Firstly, the analytic hierarchy process and the grey relational analysis are applied to measure the importance of each target in the region through four indicators of the target hazard, striking urgency, damage advantage and mission relevance, respectively. Secondly, based on the damage mechanism of shock wave and fragments to target, the corresponding damage model is established, and the damage grade of each target in the evaluated area is obtained according to the damage criteria and grading standard. Finally, the model obtains the overall damage grade of the target area by employing the fuzzy comprehensive evaluation method, with synthesizing the importance and the damage grade of each target. Through the verification of an example, it demonstrates the certain feasibility of the model and provides a certain basis and reference for the subsequent research.     

永磁无刷直流电机驱动器并联系统环流的抑制

驱动器并联方式能有效扩大驱动容量,但该方式容易引入环流。为了抑制环流,分析了两个独立电源供电的两台驱动器并联结构系统,阐述了环流的特性,并提出了基于环流反馈的控制结构。这种控制结构通过环流的反馈,只需要控制调整其中一台驱动器,就可减小两台驱动器输出电压的差异,实现环流抑制。仿真结果表明:这种控制结构降低了控制的复杂性,能够抑制环流,实现独立电源供电的无刷直流电机驱动器并联。     

Value management of diagnostic equipment with cancelation,no‐show,and emergency patients

Magnetic resonance imaging and other multifunctional diagnostic facilities, which are considered as scarce resources of hospitals, typically provide services to patients with different medical needs. This article examines the admission policies during the appointment management of such facilities. We consider two categories of patients: regular patients who are scheduled in advance through an appointment system and emergency patients with randomly generated demands during the workday that must be served as soon as possible. According to the actual medical needs of patients, regular patients are segmented into multiple classes with different cancelation rates, no‐show probabilities, unit value contributions, and average service times. Management makes admission decisions on whether or not to accept a service request from a regular patient during the booking horizon to improve the overall value that could be generated during the workday. The decisions should be made by considering the cancelation and no‐show behavior of booked patients as well as the emergency patients that would have to be served because any overtime service would lead to higher costs. We studied the optimal admission decision using a continuous‐time discrete‐state dynamic programming model. Identifying an optimal policy for this discrete model is analytically intractable and numerically inefficient because the state is multidimensional and infinite. We propose to study a deterministic counterpart of the problem (i.e., the fluid control problem) and to develop a time‐based fluid policy that is shown to be asymptotically optimal for large‐scale problems. Furthermore, we propose to adopt a mixed fluid policy that is developed based on the information obtained from the fluid control problem. Numerical experiments demonstrate that this improved policy works effectively for small‐scale problems. © 2016 Wiley Periodicals, Inc. Naval Research Logistics 63: 287–304, 2016