线阵CCD在弹丸飞行姿态测量中的应用

提出应用线阵CCD技术测量飞行弹丸攻角 ,建立了测量飞行弹丸攻角的计算方法。实际测量结果表明应用单个线阵CCD可以测量飞行弹丸的一个攻角分量。对测量误差进行了分析 ,发现线阵CCD的采样频率对测量误差的影响较大     

靴形喷油速率耦合预喷射对超高压共轨柴油机性能的影响

在介绍超高压共轨系统工作原理的基础上,基于GT-Power软件建立单缸超高压共轨柴油机的仿真模型,并利用试验验证模型的准确性,而后通过模型分析不同喷油速率、靴形喷油速率耦合不同预喷油量和靴形喷油速率耦合不同预喷提前角对超高压共轨柴油机动力性、经济性以及燃烧排放特性的影响。结果表明:通过调整超高压共轨系统中电控增压器电磁阀和喷油器电磁阀的开启时间,能够实现喷油速率的柔性可调。随着喷油速率从矩形变化到靴形,柴油机缸内压力、温度以及NO_x排放量均逐渐降低,而soot排放量逐渐升高,且靴形喷油速率可使柴油机获得最大的功率(扭矩)和最低的油耗率。靴形喷油速率耦合较小的预喷油量可以使柴油机获得更好的动力性、经济性和燃烧特性,但同时也会导致NO_x排放量的升高。靴形喷油速率耦合较大的预喷提前角有助于改善柴油机排放特性,但受到预喷油量的限制,效果并不明显。     

飞机反区速度矢量不稳定及其控制的机理

在信号流图的基础上,提出多回路分析的方法,并用于研究反区时速度矢量不稳定及其稳定控制的机理。建立了纵向动力学的信号流图,并证明了一个回路的收敛性定理。在此基础上,通过理论分析得出了速度矢量不稳定在不同层面上的原因,也得出了速度和轨迹的发散度表达式等,并表明阻力-速度曲线、轨迹角-速度曲线、极曲线、阻力系数曲线等存在相互对应的反区和正区,并且阻力-速度曲线和轨迹角-速度曲线在斜率上成比例。研究得出进场动力补偿系统下速度矢量的稳定临界条件、收敛度、稳定机理等,理论分析和仿真比较了速度恒定进场动力补偿系统和迎角恒定进场动力补偿系统在控制性能上的差异。     

RBF神经网络在深V型滑行艇阻力预报中的应用

基于SV、JYK系列滑行艇的阻力、浸湿面积、航行纵倾角试验数据,采用RBF神经网络建立了深V型滑行艇阻力预报数值图谱;针对艇艉底部横向斜升角变化的有限试验数据,提出了一种基于小样本试验数据的阻力修正方法。试验表明,该方法对深V型滑行艇(折角线长度与最大折角线宽度比在4~5.5,面积负荷系数在5.5~7,重心纵向相对位置在3%~9%,艉部艇底斜升角在5°~25°之间变化)阻力预报是可行的。在相同精度下,针对该文研究的问题,RBF神经网络所需时间少于BP神经网络。     

发射空对空导弹时目标进入角的确定

提出了一种确定目标进入角的原理和方法,这种原理和方法具有较高的计算精度和实时性,易于工程实现,可用于机载火力控制系统完成空对空导弹允许发射区计算.     

关于雷达角跟踪性能测试方法的探讨

基于雷达跟踪目标最大角速度和角加速度的定义,分析了用雷达跟踪目标最大角速度和角加速度表征雷达跟踪性能的可行性,并对角误差信号的模拟方法进行了讨论。介绍了一个可以测试幅频特性、暂态特性、雷达跟踪目标最大角速度和角加速度的测试系统设计思想。     

速率偏频激光陀螺寻北仪中转台测角周期性误差的影响分析

连续旋转式寻北仪以其突出的性能成为当前寻北仪研究的热点,但关于转台误差对连续旋转寻北算法精度影响的分析很少.针对速率偏频激光陀螺寻北仪,研究了转台测角周期性误差对寻北结果的影响.理论分析表明,测角周期性误差的存在会导致寻北结果偏离真实值,必须对其进行建模和补偿以提高寻北精度.对理论分析结果进行了仿真实验和样机寻北实验验...     

The minmax multidimensional knapsack problem with application to a chance‐constrained problem

In this paper we present a new combinatorial problem, called minmax multidimensional knapsack problem (MKP), motivated by a military logistics problem. The logistics problem is a two‐period, two‐level, chance‐constrained problem with recourse. We show that the MKP is NP‐hard and develop a practically efficient combinatorial algorithm for solving it. We also show that under some reasonable assumptions regarding the operational setting of the logistics problem, the chance‐constrained optimization problem is decomposable into a series of MKPs that are solved separately. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

Parallel machine scheduling with eligibility constraints: A composite dispatching rule to minimize total weighted tardiness

We study a parallel machine scheduling problem, where a job j can only be processed on a specific subset of machines M_j, and the M_j subsets of the n jobs are nested. We develop a two‐phase heuristic for minimizing the total weighted tardiness subject to the machine eligibility constraints. In the first phase, we compute the factors and statistics that characterize a problem instance. In the second phase, we propose a new composite dispatching rule, the Apparent Tardiness Cost with Flexibility considerations (ATCF) rule, which is governed by several scaling parameters of which the values are determined by the factors obtained in the first phase. The ATCF rule is a generalization of the well‐known ATC rule which is very widely used in practice. We further discuss how to improve the dispatching rule using some simple but powerful properties without requiring additional computation time, and the improvement is quite satisfactory. We apply the Sequential Uniform Design Method to design our experiments and conduct an extensive computational study, and we perform tests on the performance of the ATCF rule using a real data set from a large hospital in China. We further compare its performance with that of the classical ATC rule. We also compare the schedules improved by the ATCF rule with what we believe are Near Optimal schedules generated by a general search procedure. The computational results show that especially with a low due date tightness, the ATCF rule performs significantly better than the well‐known ATC rule generating much improved schedules that are close to the Near Optimal schedules. © 2017 Wiley Periodicals, Inc. Naval Research Logistics 64: 249–267, 2017     

带三维落角约束的寻的导弹制导与姿控系统设计

针对带三维落角约束的寻的导弹制导与姿态控制系统设计问题,提出一种基于终端滑模控制和扩张状态观测器的六自由度制导控制系统设计方法。建立包含模型不确定项的寻的导弹六自由度质心与绕质心模型,设计内外双层环路六自由度制导控制系统框架;基于弹-目三维相对运动模型和坐标系转移矩阵建立以攻角和侧滑角为输入的三维全耦合导引方程,利用终端滑模控制方法和扩展状态观测器得到期望的攻角和侧滑角并将其转化为对应的俯仰、偏航和滚转角指令;根据线性形式的寻的导弹绕质心动力学方程,设计与俯仰、偏航和滚转角相关的滑模面向量,并利用终端滑模控制方法和扩张状态观测器得到寻的导弹的副翼偏角、方向舵偏角和俯仰舵偏角指令。六自由度数值仿真结果验证了该方法的有效性和鲁棒性,并证明了该制导控制系统设计方法能以较少的控制设计参数完成预设的制导控制任务。