坦克射击事故的人-机-环境因素

从系统工程学的角度,揭示出坦克射击事故的发生决不是偶然的,而主要是由于坦克射击人-机-环境系统中诸因素之间的不协调、不稳定造成的。结合坦克射击训练的不同层次,运用统计学方法,对坦克射击事故中的人-机-环境因素进行了分析,给出了坦克射击不同层次训练事故发生的原因,揭示了坦克射击训练事故发生的一般规律。     

某新型主战坦克超越射击时至友军的安全距离

在分析影响坦克超越射击时至友军安全距离主要因素的基础上,结合某新型主战坦克炮口冲击波超压试验数据,通过运用M athem atica软件对数据进行统计处理和理论分析计算,提出了某新型主战坦克超越射击时至友军的安全距离,为我军新型主战坦克安全地实施超越射击提供了可靠的理论依据。     

基于弹道仿真的垂直发射型舰空导弹杀伤区模型

以垂直发射型舰空导弹为研究对象,分别建立了无控段、转弯段和制导段弹道数学模型。通过对弹道进行仿真,获取给定脱靶量的命中点集合,并拟合得到杀伤区。该模型基本满足针对不同高度、速度入侵目标相应杀伤区的解算,所得数据可作为舰艇防空作战指挥决策、编队防空队形配置和编队协同防空作战效能评估、防空火力协同的依据。     

舰炮一维修正弹校正诸元误差和预测误差试射

由于工作原理不同,舰炮使用传统无控弹试射方法不适用于一维弹道修正弹。分析了舰炮使用一维弹道修正弹射击误差构成和试射的必要性,提出了一维弹道修正弹校正射击诸元误差和预测误差试射新方法。首先通过分析对海射击以实际观测弹着水柱与提前点偏差作为发射诸元误差的精度,以及以预测弹着落点与实际观测弹着水柱偏差作为预测误差的精度,提出了求取诸元误差和预测误差的方法,论证了试射发数;然后从距离上和方向上校正诸元误差和预测误差。假设各误差值,通过仿真计算表明,按新方法试射能够显著提高射击精度。     

一种高炮拦阻射击新体制

针对高炮拦阻射击,提出了一种新射击体制,详细叙述了该体制的实现机理,并建立了数学模型。在此基础上,针对某型现役高炮的武器性能参数,探讨了初速序列的确定等关键问题,并进行了数值计算。该体制射击过程中不需要改变方向角和射角,对随动系统的要求大幅降低,可缓解自行高炮系统的随动制约,还可使大量随动性能较差的牵引高炮重新焕发生机。该体制的提出与最终实现对提升高射综合体防空反导作战效能具有重要意义。     

车载火控系统标定原理及误差分析

巡航导弹的快速发展改变了现代战争的作战模式,为了实现对该目标的有效拦截,将防空火控系统组网是一种有效手段。文中以车载火控系统组网为例,介绍了火控系统两种标定方法的原理,并结合目标态势对误差进行了分析,结果表明系统标定引入的误差与定位定向设备精度、标定系统距离和目标态势都是相关的。     

火灾区域模拟原理及CFAST软件应用

分析火灾区域模型的理论基础 ,介绍CFAST软件的功能及操作 ,并应用该软件对某建筑物二楼舞厅的火灾安全性进行评估     

舰舰协同防空的舰空导弹杀伤区分析

针对舰艇编队协同防空时的耦合杀伤区形状及纵深等问题进行了研究,以定量地对编队耦合杀伤区进行简化描述。分析了单舰对典型目标的杀伤区特性,探讨了舰艇编队的典型防空队形,研究了纵向上递阶多层次、横向上同阶耦合的"递阶封闭圈原理"。以一阶耦合杀伤区为重点,依据攻击目标的不同,将其分成相对航路捷径为零和相对航路捷径均非零两类情况建立了耦合杀伤区纵深的计算模型,并扩展到了高阶耦合的情况。研究了耦合杀伤区与舰舰间距和来袭目标进攻舷角等参数的相互关系以及灵敏度。结果表明建立的模型符合实际,具有一定的指导意义。     

Effects of nano-sized aluminum on detonation characteristics and metal acceleration for RDX-based aluminized explosive

Nano-sized aluminum(Nano-Al)powders hold promise in enhancing the total energy of explosives and the metal acceleration ability at the same time.However,the near-detonation zone effects of reaction between Nano-Al with detonation products remain unclear.In this study,the overall reaction process of 170 nm Al with RDX explosive and its effect on detonation characteristics,detonation reaction zone,and the metal acceleration ability were comprehensively investigated through a variety of experiments such as the detonation velocity test,detonation pressure test,explosive/window interface velocity test and confined plate push test using high-resolution laser interferometry.Lithium fluoride(LiF),which has an inert behavior during the explosion,was used as a control to compare the contribution of the reaction of aluminum.A thermochemical approach that took into account the reactivity of aluminum and ensuing detonation products was adopted to calculate the additional energy release by afterburn.Combining the numerical simulations based on the calculated afterburn energy and experimental results,the param-eters in the detonation equation of state describing the Nano-Al reaction characteristics were calibrated.This study found that when the 170 nm Al content is from 0％to 15％,every 5％increase of aluminum resulted in about a 1.3％decrease in detonation velocity.Manganin pressure gauge measurement showed no significant enhancement in detonation pressure.The detonation reaction time and reaction zone length of RDX/Al/wax/80/15/5 explosive is 64 ns and 0.47 mm,which is respectively 14％and 8％higher than that of RDX/wax/95/5 explosive(57 ns and 0.39 mm).Explosive/window interface velocity curves show that 170 nm Al mainly reacted with the RDX detonation products after the detonation front.For the recording time of about 10 μs throughout the plate push test duration,the maximum plate velocity and plate acceleration time accelerated by RDX/Al/wax/80/15/5 explosive is 12％and 2.9 μs higher than that of RDX/LiF/wax/80/15/5,respectively,indicating that the aluminum reaction energy significantly increased the metal acceleration time and ability of the explosive.Numerical simulations with JWLM explosive equation of state show that when the detonation products expanded to 2 times the initial volume,over 80％of the aluminum had reacted,implying very high reactivity.These results are significant in attaining a clear understanding of the reaction mechanism of Nano-Al in the development of aluminized explosives.     

速射转管炮射击校正方法

速射转管炮的使用成功地解决了射速高、寿命长、后坐力小三者之间的矛盾,但另一方面也给舰炮火控系统带来了新的问题。在分析转管炮对弹丸运动影响的基础上,重点描述了速射转管炮射击校正的方法。