“三个代表”重要思想是马克思主义政党学说的新发展

“三个代表”重要思想是马克思主义论述的提炼和概括。以江泽民同志为核心的第三代领导集体不断研究新情况,不断总结我党的宝贵经验,提出了新时期党的建设的总目标,制定了一系列加强党的建设的重大举措,开辟了继毛泽东思想、邓小平理论之后马克思主义基本原理与中国实际相结合的又一新境界。     

军事基础课程体系改革与研究

以新时期军事斗争准备为牵引,改革与创新军事基础课程体系,是我院"4+1"模式新型军事人才对军事基础教学与训练的客观要求.通过重点阐述我院围绕加强学员的素质教育,深化军事基础课程体系改革与研究的思路,为新形势下军事基础课程体系深层次的改革与发展,提供了若干参考.     

可压缩流动压力修正方程分析

依据Ｐａｔａｎｋａｒ提出的差分方程稳定性判断的４项基本法则,对可压缩流动的压力修正方程进行了分析,得出压力修正方程系数为正的条件．指出在每一次求解压力修正方程时必须提高解的收敛程度,以保证下一次迭代的差分方程矩阵接近主对角占优．分析了速度离散方程的欠松驰因子对可压缩流压力修正方程的影响．     

基于一种模型的中子星结构

从物态方程出发,利用中子星结构方程计算了中子星的结构。得到了引力质量材M_G=1.27M_θ材,转动惯量I=1.29x10(45)g/cm~2,与观测结果符合较好。     

含非线性半群的微分包含

研究了形如X＇（t）∈-Ax（t）＋F（t,x（t））,0≤t≤T,X（0）＝x0的微分包含解的存在的局部性和整体性的结果,并在某种条件下研究了解的稳定性。     

子母弹再入段飞行干扰弹道仿真系统设计与实现

建立了分块的子母弹全弹道仿真流程,给出了影响子母弹子弹落点散布的三类再入段干扰因素,并提出了干扰因素的基本分析方法,最后对子母弹再入段飞行干扰弹道仿真系统的设计方案进行了总结。结果表明,该仿真系统可以弹道的不同阶段为入口进行不同导弹飞行段的弹道解算,通过设置不同的干扰因素,可进行多因素对子弹落点散布影响研究,为子母弹子弹落点散布规律的研究提供技术支撑。     

基于双重酉滤波的再入目标实时跟踪

适当的运动模型和估计方法是提高再入目标跟踪性能的关键.选择机动再入动力学模型,将再入目标跟踪问题转化为状态和参数的联合估计问题,并利用试验数据分析了再入模型状态和参数的相关性.针对原始双重酉滤波算法的确定性系统输入假设造成信息损失的局限性,提出了一种基于随机性系统输入假设的改进双重酉滤波算法,并从理论上分析了该算法的估...     

Coherent systems based on sequential order statistics

The sequential order statistics (SOS) are a good way to model the lifetimes of the components in a system when the failure of a component at time t affects the performance of the working components at this age t. In this article, we study properties of the lifetimes of the coherent systems obtained using SOS. Specifically, we obtain a mixture representation based on the signature of the system. This representation is used to obtain stochastic comparisons. To get these comparisons, we obtain some ordering properties for the SOS, which in this context represent the lifetimes of k‐out‐of‐n systems. In particular, we show that they are not necessarily hazard rate ordered. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

Periodic review inventory management with contingent use of two freight modes with fixed costs

We study a stochastic inventory model of a firm that periodically orders a product from a make‐to‐order manufacturer. Orders can be shipped by a combination of two freight modes that differ in lead‐times and costs, although orders are not allowed to cross. Placing an order as well as each use of each freight mode has a fixed and a quantity proportional cost. The decision of how to allocate units between the two freight modes utilizes information about demand during the completion of manufacturing. We derive the optimal freight mode allocation policy, and show that the optimal policy for placing orders is not an (s,S) policy in general. We provide tight bounds for the optimal policy that can be calculated by solving single period problems. Our analysis enables insights into the structure of the optimal policy specifying the conditions under which it simplifies to an (s,S) policy. We characterize the best (s,S) policy for our model, and through extensive numerical investigation show that its performance is comparable with the optimal policy in most cases. Our numerical study also sheds light on the benefits of the dual freight model over the single freight models. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

我国周边安全形势对边防工作的影响及应对策略

边防工作作为国防的重要组成部分,涉外性强,受周边安全形势影响大。当前,我国的边防工作既面·l盏着难得的发展机遇,同时更要直面各种挑战。分析周边安全环境对我国边防的影响,可以使我们更好地认清形势,趋利避害,抓住机遇,充分发挥职能作用,确保边防安全稳定。