微型计算机在复合材料强度准则研究中的应用

文中论述了运用微型计算机(IBM-PC)进行复合材料强度准则研究的方法,包括强度包络线绘制、双向加载数据采集及实验数据处理等,同时还研究了如何确定双向试验中的破坏载荷值,并在分析实例中提供了较详细的数据。     

Prediction of concentration of toxic gases produced by detonation of commercial explosives by thermochemical equilibrium calculations

An adverse effect resulting from explosive mine blasts is the production of toxic nitrogen oxides (NO and NO₂) and carbon monoxide (CO). The empirical measurements of the concentration of toxic gases showed that it depends not only on the composition of an explosive and properties of its ingredients but also on several other parameters, such as volume of blasting chamber, explosive charge mass and design, confinement characteristics, surrounding atmosphere, etc. That explains why measured concentrations of toxic gases reported in literature significantly differ.In this paper, we discuss the possibility of theoretical prediction of the concentration of toxic gases by thermochemical equilibrium calculation applying two models: ideal detonation model and deflagration model. It can be demonstrated that thermochemical calculations can provide a good estimation of the measured concentrations and reproduce experimentally obtained effects of additives on the production of toxic gases. It was also found that the ideal detonation model applies to heavily confined explosive charges, while the deflagration model is more suitable for low detonation velocity explosives with light confinement.     

FAE野外空中爆炸效应实验研究及其一次起爆机理探讨

野外进行1．8kg的FAE静爆实验,采用不同配方的纯固态燃料和液一固混合燃料与等质量的TNT对比分析。实验结果表明,FAE的爆炸效果明显优于等质量的TNT,而纯固态FAE爆炸性能强于液一固混合FAE;FAE爆炸后测到的超压分布呈现单调减趋势,这是由于测量点都分布在云爆区范围之外;FAE的云雾分散效果优于等质量的TNT装药,火焰持续时间也长。通过高速摄影图片看出,合适配方的纯固态无约束的FAE弹体火球的持续时间与有约束的液一固混合FAE弹体相当。分析了纯固态FAE爆炸后超压峰值时刻与火球最大直径时刻不同步的原因,探讨了纯固态FAE一次起爆机理。     

重大易燃易爆物质泄漏的危害及应急对策

针对重大易燃易爆物质泄漏后所表现出来的易燃易爆性、对周围的人员和空气、水土等环境资源的严重破坏性,分析了易燃易爆物质泄漏的原因,并有针对性的从划定警戒区、查找泄漏点、堵漏、泄漏物质的浓度监测、排除火险因素、安全疏散、个人防护等方面提出了应急处置对策。     

在分离式Hopkinson拉杆实验中确定临界实验条件的经验方法

在分离式Hopkinson拉杆实验中,常常需要获得试样在经历一个拉力脉冲拉断情况下的最低应变率,而在分离式Hopkinson拉杆装置中确定对应最低应变率的发射压力需要进行多次尝试性实验。为了更好地解决这一问题,提出一种简单的经验方法,可以通过一次拉断的实验结果计算出一个拉力脉冲拉断试样需要的最小发射压力及相应的应变率,进一步可以预测不同发射压力下的应变率。对4种铝合金试样进行拉伸实验,结果表明,利用提出的经验方法得到的应变率结果与实验结果吻合较好,可以有效地对发射压力和实验应变率进行预估。     

CFRP筋混凝土柱骨架曲线数值模拟

为研究CFRP筋混凝土柱在低周反复荷载作用下的骨架曲线,基于已有的3根CFRP筋混凝土柱的滞回曲线,采用混凝土损伤塑性本构模型和碳纤维筋本构模型,运用有限元分析软件ABAQUS对其试验过程进行数值模拟,并将模拟所得骨架曲线与试验结果进行对比。结果表明:通过数值模拟得到的骨架曲线与试验结果吻合较好,数值模拟趋势与试验得到的趋势一致,从而对该有限元模型的适用性进行了验证。     

Research on the fracture behavior of PBX under static tension

The fracture behavior of polymer-bonded explosive (PBX) seriously affects the safety and reliability of weapon system. The effects of interface debonding and initial meso-damage on the fracture behavior of PBX under quasi-static tension are studied using numerical method. A two-dimensional representative volume element (RVE) is established based on Voronoi model in which the component contents could be regulated and the particles are randomly distributed. A nonlinear damage model of polymer matrix relative to matrix depth between particles is constructed. The results show that the simulated strain-stress relation is coincident with experiment data. It is found that interface debonding leads to the nucleation and propagation of meso-cracks, and a main crack approximately perpendicular to the loading direction is generated finally. The interface debonding tends to occur in the interface perpendicular to the loading direction. There seems to be a phenomenon that strain softening and hardening alternatively appear around peak stress of stress and strain curve. It is shown that the initial damages of intragranular and interfacial cracks both decrease the modulus and failure stress, and the main crack tends to propagate toward the initial meso-cracks.     

弹药装填机器人作业平台仿真系统设计与实现

针对弹药装填机器人作业过程复杂的问题,基于作业任务实用性和可操作性的要求,设计了一种作业平台仿真系统。在深入分析弹药装填机器人作业任务和工作过程的基础上,构建了总体设计方案,研究了仿真系统的稳定性技术,进行了运动控制、数据采集以及传感器精度等硬件部分设计和模块化技术的软件设计,建立了弹药装填机器人仿真系统。仿真结果表明：该设计能够实现对弹药装填机器人的控制和实时作业。     

基于预配装思想的物资混装配载优化策略

提出了一种基于预配载思想的装备物资混装配载策略,并应用模糊聚类和混合智能算法进行了实例仿真。研究对于组合优化策略在装备保障信息化系统建设中的应用具有积极意义。     

箱装物资装运模型的构建及提货可视化设计

以汽车为例介绍了物资装载时横装、顺装和混装等几种模型,并对其算法进行了归纳。设想了一个以物资出入库为原型的可视化系统,并以建立的装运模型为基础,设计了可视化提货系统的实现过程。