激光熔覆搭接过程残余应力应变的有限元计算

激光熔覆过程中产生的残余应力与应变对熔覆层的裂纹开裂倾向有重要影响。利用有限元法对激光多道搭接过程熔覆层的残余应力和应变进行计算,计算过程中主要考虑瞬时温度变化引起的热应力、σ-ε曲线、有限元网格、力学边界条件4个方面。热应力主要在温度场计算结果的基础上求得;σ-ε曲线采用的是线性强化材料的弹塑性曲线;有限元网格主要采用分区划分的形式进行。通过计算,得到了搭接后的熔覆层上关键点的残余应力和应变分别为1 400 MPa和2.2×10^-2。结果表明：搭接熔覆层交界处的点产生焊趾裂纹的倾向最大,第1道熔覆顶点处产生横向裂纹的倾向次之。     

多孔介质中气体流量对流动阻力影响的实验研究

对空气在多孔介质(Pd/SiO2颗粒催化剂)中的流动阻力特性进行了冷态实验,研究了气体流量对流动阻力的影响.结果表明:催化剂厚度一定时,随着气体流量增大,多孔介质中的流动阻力也逐渐增大.经过与经典阻力计算公式对比,分析了偏差影响因素.最后,结合实验数据拟合出了适合管式反应器中流动阻力计算的半经验公式,能精确地预测颗粒填...     

防止反编译技术研究

运用反编译技术可以对软件可执行二进制代码进行非法的修改或窃取其知识产权。为了防范这种情况,提出了在程序的汇编级转化直接跳转为间接跳转和插入伪造的跳转表以隐藏程序控制流的2种方法,来提高程序防止反编译的性能,增加软件分析的难度。     

XNAV中的相对论效应(II)——光线弯曲和引力延缓

详细讨论了XNAV基本方程中的广义相对论效应之一:脉冲星到观测者的光线弯曲和传播时间的引力延缓。计算出1PN度规下的光线弯曲轨迹和时间延缓以及2PN度规下的引力延缓,文中得到的结论是对现行公式的修正。     

一类带配送中心运输问题的容量扩张模型研究

运输问题一般采用表上作业法来解决,考虑一类带配送中心的运输问题,若仍采用表上作业法,会使问题复杂化.文中采用一种构造辅助网络的方法:在运输网络中将每个配送中心均拆分成两个点,连接两点形成新弧,构造出新的网络,并给每条弧赋予参数,将此类运输问题转换为最小费用流模型来解决,可以使问题模型和运算简单化.在此基础上,考虑运输网络中配送中心和边的容量扩张问题.     

磁悬挂天平偏航电磁场的二维有限元分析

在磁悬挂天平偏航控制中,偏航线圈中的电流变化对模型姿态变化影响十分显著.为了提高天平的偏航控制精度,有必要对天平偏航电磁场进行更为精确的分析.该文采用有限单元法对磁悬挂天平偏航电磁场进行了分析,得到了比传统计算方法更为准确的结果,并在实验中进行了验证,从而为磁悬挂天平的偏航控制提供了参考.     

Simulation of the plasticizing behavior of composite modified double-base (CMDB) propellant in grooved calendar based on adaptive grid technology

The frequent occurrence of safety accidents during the calendering process is caused by the flammable and explosive properties of composite modified double-base (CMDB) propellant. Optimization of process parameters with the aid of fluid simulation technology could effectively ensure the safety of the calendering process. To improve the accuracy of the simulation results, material parameters and model structure were corrected based on actual conditions, and adaptive grid technology was applied in the local mesh refinement. In addition, the rheological behavior, motion trajectories and heat transfer mechanisms of CMDB propellant slurry were studied with different gaps, rotational rates and temperatures of two rollers. The results indicated that the refined mesh could significantly improve the contour clarity of boundaries and simulate the characteristics of CMDB propellant slurry reflux movement caused by the convergent flow near the outlet. Compared with the gap, the increased rotational rate of roller could promote the reflux movement and intensify the shear flow of slurry inside the flow region by viscous shear dragging. Meanwhile, under the synergistic effect of contact heat transfer as well as convective heat exchange, heat accumulated near the outlet and diffused along the reflux movement, which led to the countercurrent heat dissipation behavior of CMDB propellant slurry. The plasticizing mechanism of slurry and the safety of calendering under different conditions were explored, which provided theoretical guidance and reference data for the optimization of calendering process conditions. Based on the simulation results, the safety of the CMDB propellant calendering process could be significantly improved with a few tests conducted during a short research and development cycle.     

非定常超音速流动数值计算方法比较

为适用于非定常流场计算 ,在保证时、空二阶精度的前提下 ,通过引入变系数残值光顺技术 ,提高了四步Runge Kutta方法的计算效率 ;并针对球锥简谐振动过程 ,数值比较Runge Kutta多步法和“双时间法”的计算精度。     

等离子体粒子模拟中的电磁场边界条件

针对等离子体粒子模拟中电磁场边界条件的选取问题 ,对简单吸收边界条件、Lindman边界条件、超吸收边界条件等进行了详细的讨论。结果表明 ,简单吸收边界条件计算量最小、误差最大 ,超吸收边界条件计算量最大、误差最小 ,Lindman边界条件误差较小且其反射系数对入射角的依赖性不大