Modeling of the whole process of shock wave overpressure of free-field air explosion

The waveform of the explosion shock wave under free-field air explosion is an extremely complex problem. It is generally considered that the waveform consists of overpressure peak, positive pressure zone and negative pressure zone. Most of current practice usually considers only the positive pressure. Many empirical relations are available to predict overpressure peak, the positive pressure action time and pressure decay law. However, there are few models that can predict the whole waveform. The whole process of explosion shock wave overpressure, which was expressed as the product of the three factor functions of peak, attenuation and oscillation, was proposed in the present work. According to the principle of explosion similarity, the scaled parameters were introduced and the empirical formula was absorbed to form a mathematical model of shock wave overpressure. Parametric numerical simulations of free-field air explosions were conducted. By experimental verification of the AUTODYN numerical method and comparing the analytical and simulated curves, the model is proved to be accurate to calculate the shock wave overpressure under free-field air explosion. In addition, through the model the shock wave overpressure at different time and distance can be displayed in three dimensions. The model makes the time needed for theoretical calculation much less than that for numerical simulation.     

动载荷轴承滑油管内压力波研究初探

作者通过分析计算动载荷轴承油膜区间的变化规律,发现轴承滑油进口处油膜压力随时间变化。由于轴承进口处油膜压力变化,导致滑油进口处存在压力波。进一步分析滑油进口处压力波在滑油管内的传播及试验研究,首次发现,滑油管内压力波是由轴心运动引起的,它与轴承滑油压力、温度、轴承负荷及轴承几何尺寸等因素有关。作者认为,滑油管内压力波的发现,必将推动轴承润滑理论的发展。     

《安娜贝尔·李》的文体学分析

爱德加.爱伦.坡是美国文坛极具影响力的作家、诗人、文学评论家,他对后世文化产生了深远的影响。《安娜贝尔.李》是诗人坡1849年去世后才发表的最后一篇诗作,代表其唯美主义风格的顶峰。从文体学的角度对该诗的分析为该诗的理解提供了全新的视角。     

高频地波雷达目标高度估计的AR模型方法

高度估计对于高频地波雷获取三维信息、提高预警能力很有意义。然而目标RCS的随机起伏对高度估计产生严重影响,通过对RCS随机起伏的AR模型建模和模型参数的自适应估计,提出了在RCS变化的条件下高度估计的扩展卡尔曼滤波算法。通过Monte Carlo仿真和外场试验数据的处理,验证了该方法对抑制RCS随机起伏、提高高度估计精度的有效性。     

A fast-running method for blast load prediction shielding by a protective barrier

This study presents a simplified blast load prediction method on structures behind a protective barrier. The proposed method is basically an empirical approach based on Kingery-Bulamsh (K-B) chart and finite element (FE) analysis results. To this end, this study divides the structure into three regions by three critical points. Blast loads at each critical point can be calculated based on K-B chart and an approximation according to FE analysis results. Finally, peak reflected overpressure and impulse distributed on the structure can be approximately estimated by linearly connecting blast loads at each critical point. In order to confirm a feasibility of the proposed method, a series of numerical simulations were carried out. The simulation results were compared with FE analysis results which are presented in the open literature. From such comparisons, it was found that the proposed method is applicable to predict blast loads on structures behind a protective barrier.     

Experimental study of transient pressure wave in the behind armor blunt trauma induced by different rifle bullets

Pressure wave plays an important role in the occurrence of behind armor blunt trauma (BABT), and ballistic gelatin is widely used as a surrogate of biological tissue in the research of BABT. Comparison of pressure wave in the gelatin behind armor for different rifle bullets is lacking. The aim of this study was to observe dynamic changes in pressure wave induced by ballistic blunt impact on the armored gelatin block and to compare the effects of bullet type on the parameters of the transient pressure wave. The gelatin blocks protected with National Institute of Justice (NIJ) class III bulletproof armor were shot by three types of rifle bullet with the same level of impact energy. The transient pressure signals at five locations were recorded with pressure sensors and three parameters (maximum pressure, maximum pressure impulse, and the duration of the first positive phase) were determined and discussed. The results indicated that the waveform and the twin peak of transient pressure wave were not related to the bullet type. However, the values of pressure wave’s parameters were significantly affected by bullet type. Additionally, the attenuation of pressure amplitude followed the similar law for the three ammunitions. These findings may be helpful to get some insight in the BABT and improve the structure design of bullet.     

冲击波在多层结构中的传播

对水下冲击载荷在多层结构中的传播规律进行了理论分析,根据分界面上的应力和速度连续性条件得到透射波强度的解析表达式.从理论分析可以看出,舰船结构的多层防护体系对于减少爆炸冲击的损伤具有重要的作用,防护结构的波阻抗越大,防护的效果越好,这种方法可应用于多层防护结构在远场爆炸冲击波作用下的毁伤或防护方面的预测.     

柔性长鳍扭波推进数学模型分析

以"尼罗河魔鬼"鱼的柔性长背鳍扭波推进模式为研究对象,通过观察活鱼的游动模式,提取影响扭波推进的运动学要素,建立了描述柔性长背鳍扭波推进时动态曲面的数学模型。研究了鳍条仰角与摆动规律对鳍面的影响。最后,用细长体理论分析并计算出推力分布。研究表明,鳍条仰角在φ=85°的情况下所形成的鳍面与垂直鳍条所形成的鳍面相比,其最大偏离值与鳍长之比为1.7%,可以用垂直于基线的鳍条制作模型;鳍条按正弦规律摆动时所形成的扭波波形鳍面与实鱼鳍面相似。     

FAE野外空中爆炸效应实验研究及其一次起爆机理探讨

野外进行1．8kg的FAE静爆实验,采用不同配方的纯固态燃料和液一固混合燃料与等质量的TNT对比分析。实验结果表明,FAE的爆炸效果明显优于等质量的TNT,而纯固态FAE爆炸性能强于液一固混合FAE;FAE爆炸后测到的超压分布呈现单调减趋势,这是由于测量点都分布在云爆区范围之外;FAE的云雾分散效果优于等质量的TNT装药,火焰持续时间也长。通过高速摄影图片看出,合适配方的纯固态无约束的FAE弹体火球的持续时间与有约束的液一固混合FAE弹体相当。分析了纯固态FAE爆炸后超压峰值时刻与火球最大直径时刻不同步的原因,探讨了纯固态FAE一次起爆机理。     

二次相位误差对FMCW SAR成像质量的影响

调频连续波合成孔径雷达(FMCW SAR)是一种新近提出来的成像雷达体制,在FMCW SAR成像中,相位误差是成像质量下降的主要原因,必须对相位误差进行消除.首先建立了存在二次相位误差的FMCW SAR的信号模型,然后分析了二次相位误差对成像质量的影响,提出了一种补偿二次相位误差的方法.此方法与存在二次相位误差时的成像结果相比较,有效地消除了二次相位误差的影响,成像质量大为提高.