基于变转速的柴油抗磨性评定方法

以MRS-1J型四球摩擦磨损试验机为平台,提出了一种变转速条件下柴油抗磨性评定方法。利用VC＋＋对试验机软件进行了改进,增加了负荷-转速程序控制功能,实现了试验机自由设置转速、负荷的变化范围、变化速率和变化模式。通过正交试验方法确定了最佳试验条件,发现试验时间3N1min,负荷11N2N,油温60℃,转速在1 min内由100 r/min线性上升至20N3r/min再线性下降至100 r/min并依次循环时,该试验方法具有良好的重复性和区分性。在与高频往复试验机法的对比中,发现该方法的磨斑直径变化率大于高频往复试验机法,证明变转速四球机法优于高频往复试验机法。     

Reduction of global effects on vehicles after IED detonations

Global effects caused by the detonation of an IED near a military vehicle induce subsequent severe acceleration effects on the vehicle occupants. Two concepts to minimize these global effects were developed, with the help of a combined method based on a scaled experimental technology and numerical simulations. The first concept consists in the optimization of the vehicle shape to reduce the momentum transfer and thus the occupant loading. Three scaled V-shaped vehicles with different ground clearances were built and compared to a reference vehicle equipped with a flat floor. The second concept, called dynamic impulse compensation (DIC), is based on a momentum compensation technique. The principal possibility of this concept was demonstrated on a scaled vehicle. In addition, the numerical simulations have been performed with generic full size vehicles including dummy models, proving the capability of the DIC technology to reduce the occupant loading.     

基于类成员后向切片的面向对象程序回归测试

程序切片是一种重要的程序分析方法,类成员级粒度的切片技术目前仅仅有Tip提出的类层次切片技术.Tip提出的类层次切片技术其分析基础是Rossie-Friedman的类层次框架,但主要用于面向对象程序的优化,并不适用于回归测试.本文基于Rossie-Friedman的类层次框架提出类成员后向切片方法,并提出一个覆盖类的方法一级的回归测试策略.     

铁路区间信号系统测试评估平台——自动闭塞移频信号的数据采集及验证

铁路区间信号系统测试评估平台中数据采集和验证子系统研究移频信号的数据采集、A/D转换和信号显示,移频信号的处理是对被测系统发送和接收的移频信号的载频和调制低频鉴频鉴幅,进行验证,为测试评估平台对被测系统的功能、可靠性和安全性评估作必要的数据准备.     

软件测试的故障模型

故障模型是测试的基础,也是一个测试方法成熟的重要标志.软件的错误表现为2个方面:①计算结果错误;②系统"死机".导致第1类错误的故障相对来说是比较容易检测的.导致系统死机的故障其后果是严重的,这类故障由于一般其检测概率较小,也往往难以检测.死循环故障是最常见的能引起系统死机的故障,但这种故障由于其复杂性难以对其模型化,同时在许多情况下,死循环故障也比较容易暴露.对C 中几种能导致系统死机的典型故障进行了分析,这种故障的检测其意义重大,将这些典型的故障组合在一起,就构成了面向软件系统死机故障的故障模型.     

Development programs for one‐shot systems using multiple‐state design reliability models

Design reliability at the beginning of a product development program is typically low, and development costs can account for a large proportion of total product cost. We consider how to conduct development programs (series of tests and redesigns) for one‐shot systems (which are destroyed at first use or during testing). In rough terms, our aim is to both achieve high final design reliability and spend as little of a fixed budget as possible on development. We employ multiple‐state reliability models. Dynamic programming is used to identify a best test‐and‐redesign strategy and is shown to be presently computationally feasible for at least 5‐state models. Our analysis is flexible enough to allow for the accelerated stress testing needed in the case of ultra‐high reliability requirements, where testing otherwise provides little information on design reliability change. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

Group testing procedures with quantitative features and incomplete identification

We present a group testing model for items characterized by marker random variables. An item is defined to be good (defective) if its marker is below (above) a given threshold. The items can be tested in groups; the goal is to obtain a prespecified number of good items by testing them in optimally sized groups. Besides this group size, the controller has to select a threshold value for the group marker sums, and the target number of groups which by the tests are classified to consist only of good items. These decision variables have to be chosen so as to minimize a cost function, which is a linear combination of the expected number of group tests and an expected penalty for missing the desired number of good items, subject to constraints on the probabilities of misclassifications. We treat two models of this kind: the first one is based on an infinite population size, whereas the second one deals with the case of a finite number of available items. All performance measures are derived in closed form; approximations are also given. Furthermore, we prove monotonicity properties of the components of the objective function and of the constraints. In several examples, we study (i) the dependence of the cost function on the decision variables and (ii) the dependence of the optimal values of the decision variables (group size, group marker threshold, and stopping rule for groups classified as clean) and of the target functionals (optimal expected number of tests, optimal expected penalty, and minimal expected cost) on the system parameters.© 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

基于ARM-WindowsCE的便携式漏磁检测仪设计

为了分析漏磁信号和缺陷类型之间存在的对应关系,研制了一种适合现场检测的便携式漏磁检测仪。给出基于ARM9嵌入式结构的漏磁检测仪总体结构,该检测仪以S3C2440A处理器为核心,采用WindowsCE5.0为操作系统,以HONEYWELL公司的HMC1021磁阻传感器来获取铁磁材料表面的漏磁信号,较好地实现了漏磁检测仪的基本功能。     

管道超声导波无损检测技术应用研究

利用研制的磁致伸缩超声导波无损检测装置对长直无缝钢管、舰用锅炉U型管和弯管进行了大量试验研究.研究发现,通过对该装置中磁致伸缩传感器的放置位置及方向进行适当调整,此装置即可在管道中激发纵向导波;该技术对管道壁厚减薄、磨损或腐蚀、裂纹、焊缝等缺陷同样具有检测能力;选择低频(20~40 kHz)激励脉冲信号有利于减少波的发散特性和提高缺陷的检测能力;导波在管道中传播衰减缓慢,适用于长距离、大范围、快速、非接触管道检测.     

引信软件安全性仿真测试系统研究

首先分析了引信软件的特点,结合引信的高安全性要求,对引信软件安全性进行分析。然后详细讨论了构建引信软件安全性仿真测试系统的难点,提出了系统工作原理,对其特点进行了分析,指出了系统要实现的功能,描述了系统体系结构。