1, 4-二氯甲基-2, 5-二甲基苯与1, 4-二氯甲基-2-甲氧基-5-辛氧基苯的共聚研究

用1,4-二氯甲基-2,5-二甲基苯和1,4-二氯甲基-2-甲氧基-5-辛氧基苯共聚合成了一种可溶的聚对苯乙炔的衍生物,对共聚物结构进行了红外光谱、核磁共振氢谱表征     

一类多维双重时序 AR(1)-MA(q) 模型的平稳性

讨论了一类多维双重时序ＡＲ（１）－ＭＡ（ｑ）模型的二阶平稳性问题。通过导出一组线性方程组，给出了这类模型二阶平稳的显式充分条件和必要条件，为验证模型的二阶平稳性提供了一个可行的途径。     

特大规模组合电路高速测试生成系统ATGTA-1

针对特大规模组合电路和全扫描设计电路提出了一种高速测试生成方法，并建成了相应的测试生成系统ＡＴＧＴＡ－１。该系统采用有限回溯测试模式产生方法生成测试码，采用ｎ（机器字长）个测试码并行的单故障传播方法模拟验证测试覆盖。测试生成与故障模拟为ｎ对１紧耦合集成方式。该系统运行１０个Ｂｅｎｃｈｍａｒｋ电路，取得了低测试长度、高故障覆盖、高效率的良好效果。     

介子跃迁形状因子的重夸克极限和1/m_Q修正

在BS理论框架下,对0~-→0~-和0~-→1~-(0~-和1~-分别代表赝标介子和矢量介子)跃迁的形状因子进行模型无关的分析.结果表明BS框架既能给出重夸克极限下的自旋—味对称性,又能给出重夸克有效理论关于1/m_Q修正的Luke定理及其它关系.     

Single machine sequencing with linear models of release dates

The paper deals with a problem of scheduling a set of jobs on a single machine. Before a job is released for processing, it must undergo some preprocessing treatment that consumes resources. It is assumed that the release date of a job is a linear decreasing continuous function of the amount of a locally and globally constrained, continuously divisible resource (e.g., energy, catalyzer, financial outlay, gas). The problem is to find a sequence of jobs and a resource allocation that will minimize the maximum job completion time. Such a problem appears, for example, in the ingot preheating and hot-rolling process in steel mills. It is shown that the problem is strongly NP-hard. Some polynomially solvable cases of the problem and approximate algorithms with both experimental and worst-case analysis are presented. © 1998 John Wiley & Sons, Inc. Naval Research Logistics 45: 99–113, 1998     

Probabilistic analysis of an asymptotically optimal solution for the completion time variance problem

Scheduling a set of n jobs on a single machine so as to minimize the completion time variance is a well‐known NP‐hard problem. In this paper, we propose a sequence, which can be constructed in O(n log n) time, as a solution for the problem. Our primary concern is to establish the asymptotical optimality of the sequence within the framework of probabilistic analysis. Our main result is that, when the processing times are randomly and independently drawn from the same uniform distribution, the sequence is asymptotically optimal in the sense that its relative error converges to zero in probability as n increases. Other theoretical results are also derived, including: (i) When the processing times follow a symmetric structure, the problem has 2^{⌊(n−1)/2⌋} optimal sequences, which include our proposed sequence and other heuristic sequences suggested in the literature; and (ii) when these 2^{⌊(n−1)/2⌋} sequences are used as approximate solutions for a general problem, our proposed sequence yields the best approximation (in an average sense) while another sequence, which is commonly believed to be a good approximation in the literature, is interestingly the worst. © 1999 John Wiley & Sons, Inc. Naval Research Logistics 46: 373–398, 1999     

聚钛碳硅烷的新合成法及其研究

从聚硅烷(PS)与钛酸丁酯。(Ti(OBu)_4)出发,不采用任何反应促进剂直接合成了含钛碳化硅纤维的先驱体聚钛碳硅烷(PTC)。在这一反应中,PS 首先裂解成含Si—C 骨架与Si—H 键的低分子聚硅烷(LPS)。然后,由LPS 中的Si—H 键与Ti(OBu)_4的反应以及LPS 的Si—Si 骨架裂解转化为Si—C 骨架的反应制得了PTC.本文对这种新合成法所涉及的反应过程进行了研究,并比较了新旧两法得到的PTC—1与PTC—Ⅱ的结构异同,报告了以新法制得的PTC—Ⅱ为先驱体得到的含钛碳化硅纤维的优良性能。     

有人/无人平台协同技术与行动模式研究

无人平台已广泛用于军用和民用市场,并在反恐、维稳、排爆,侦察等领域发挥了极其重要的作用。目前已形成了有人/无人平台共同协作完成任务的工作模式,大大地提高了工作的时效性、适应性、作战效能等。为了提高有人/无人平台的协同作战能力,本文研究有人/无人平台的协同作战技术体系以及作战模式,以解决在协同侦察、搜救、监视等应急任务中遇到的各种问题。此外,提出了一套完整的协同作战想定,可用于有效验证相关的协同技术。     

Analysis of artillery shoot‐and‐scoot tactics

Firing multiple artillery rounds from the same location has two main benefits: a high rate of fire at the enemy and improved accuracy as the shooter's aim adjusts to previous rounds. However, firing repeatedly from the same location carries significant risk that the enemy will detect the artillery's location. Therefore, the shooter may periodically move locations to avoid counter‐battery fire. This maneuver is known as the shoot‐and‐scoot tactic. This article analyzes the shoot‐and‐scoot tactic for a time‐critical mission using Markov models. We compute optimal move policies and develop heuristics for more complex and realistic settings. Spending a reasonable amount of time firing multiple shots from the same location is often preferable to moving immediately after firing an initial salvo. Moving frequently reduces risk to the artillery, but also limits the artillery's ability to inflict damage on the enemy.     

电磁轨道发射中内弹道动力响应特性分析

将轨道简化为移动载荷作用下固定在弹性支撑上的Bernoulli-Euler梁,通过静态电磁-结构耦合有限元模型求得外围封装的等效刚度,计算得到发射器的临界速度。另外,利用混合有限元/边界元法建立电磁-结构-运动多物理场耦合的动力学模型,求得枢轨动态接触压力和轨道的应力应变分布特性。通过在轨道背面布置光纤光栅应变传感器,利用测量数据验证了动力响应特性,并分析了弹丸在内弹道的稳定性。针对典型30 mm × 30 mm矩形口径发射器,分析及试验结果表明：C型电枢对轨道的电磁挤压力在平顶沿起始时刻达到最大值,之后随着时间推移逐渐减小;电枢通过引起的应力波在高速段容易与轨道中反射应力波发生共振,并且轨道在电枢运动的中间高速段区域受力最为集中,应力集中水平约是起始低速段区域的2.44倍;电枢运动高速段会出现晃动现象,进而引起上下轨道受力的不对称性。分析及试验结果对研究电磁轨道发射器内弹道动力响应特性和发射器结构设计具有重要指导意义。