战时装备调配保障决策模型构建研究

分析了战时装备调配保障决策的特点,运用模糊聚类分析法对装备调配保障对象进行了分组和优先级排序,以此为基础,运用目标规划法构建了战时装备调配保障决策模型,最后,通过实例验证了模型的可行性和有效性．     

A case study in bio-inspired engineering design: defense applications of exoskeletal sensors

As part of a bio-inspired design process, the authors examine exoskeletal sensors found in insects and their potential application to armor and hardened buildings. In this way, the outer hardening of a structure or vehicle would not limit the ability of occupants to arrive at an actionable picture of the outer environment. To this end, various sensor modalities employed by insects are compared and contrasted with their current human-engineered equivalents. In several sensing modalities, biosensors perform better, are smaller, and more energy efficient than human-engineered equivalents. They note that biological designs tend to employ non-linear response to signal amplitude and respond with heightened sensitivity over a greater dynamic range of signals than human-engineered sensors. The insect biological sensors have structural and mechanical innovations that preserve the protective capacity of the exoskeleton.     

预定相遇态势的潜射鱼雷射击及其技术方法

为发挥鱼雷的作战效能,提出潜射鱼雷有利相遇态势的概念,指出当一次转角射击不能满足鱼雷以有利相遇态势接近并发现目标时,各种自导方式的鱼雷均需要二次转角射击。在给出二次转角射击时机、解算模型的基础上,着重对预定相遇态势射击的关键----二次转向点的选择问题进行了系统研究,引入基于鱼雷自导探测距离的二次转向点与预定相遇点之间距离的选择方法,使得二次转向点的选择更具合理性和针对性,且适用于包括直航鱼雷在内的各种鱼雷。     

Home-Grown Fighting: A Response to the Argument for a Byzantine Influence on MS I.33

Abstract

In an earlier issue, Dr. Timothy Dawson suggested that the fighting techniques found in Royal Armouries MS I.33 may have been influenced by earlier Byzantine sword and shield combat. For evidence, he cites a series of 9th-century ivory carvings depicting similar positions found in I.33. This article is a response to Dr. Dawson’s, in which it is argued that there is ample evidence for similar combat positions being found in Western Europe that both pre-date and are contemporary with I.33.     

Dual‐ascent and primal heuristics for production‐assembly‐distribution system design

This article proposes two dual‐ascent algorithms and uses each in combination with a primal drop heuristic embedded within a branch and bound framework to solve the uncapacitated production assembly distribution system (i.e., supply chain) design problem, which is formulated as a mixed integer program. Computational results indicate that one approach, which combines primal drop and dual‐ascent heuristics, can solve instances within reasonable time and prescribes solutions with gaps between the primal and dual solution values that are less than 0.15%, an efficacy suiting it for actual large‐scale applications. © 2012 Wiley Periodicals, Inc. Naval Research Logistics, 2013     

内编队地球重力场测量性能数值分析

内编队系统通过实现内卫星纯引力轨道环境和内卫星精密定轨,完成高精度地球重力场测量,实现了不依赖于加速度计的重力卫星实施新途径。针对内编队重力场测量性能难以解析分析的情况,基于MATLAB并行程序设计进行了重力场测量数值模拟,获得了内编队重力场测量的有效阶数及其精度。在内编队轨道高度为300km、内卫星干扰力为1.0×10-10m/s2、外卫星定轨精度为3cm、内外卫星相对状态测量精度为1mm的条件下,计算得到内编队测量重力场的有效阶数为72,相应的大地水准面累积误差为44cm,重力异常累积误差为4.5mGal,由此可知内编队测量重力场的有效阶数主要分布在低阶部分。     

基于组合赋权雷达图实现电网电能质量综合评估

将改进的组合赋权雷达图方法用于电网电能质量综合评估。对主观、客观赋权法组合,基于组合权重与原权重之间的偏差尽可能小的优化思想,求取雷达图中各项指标的组合权值。利用各指标对应的扇形区域的对角线作为指标轴绘制雷达图,不仅最大限度体现各指标的独立权重,也反映了各指标之间的相互影响。利用雷达图的面积和周长两个变量完成对电能质量的综合评估。最后通过应用实例,验证了论文方法的合理性和在电能质量综合评估中的有效性。     

基于联合相似测度的SAR图像边缘点特征配准方法

针对SAR图像配准过程中几何变换影响特征匹配稳健性和适应性的问题,提出了一种在特征匹配过程中直接解算几何变换模型的边缘点特征配准方法。利用SAR图像边缘点的梯度和方向特征,基于像素迁移思想,定义了图像匹配的联合相似度——联合特征均方和(SSJF),并建立了SAR图像边缘点集相似性匹配准则;基于方向模板提出了改进的ROEWA算子;利用改进的遗传算法(GA)来进行相似度的全局优化搜索,获取配准模型参数;利用多幅SAR图像的配准试验,对本文方法的性能进行了验证。     

失去润滑条件下弧齿锥齿轮传动系统瞬态温度场Simulink仿真分析

根据传热学理论和热网络法,以某型直升机尾减速器弧齿锥齿轮传动系统为研究对象,建立了其温度场Simulink仿真计算模型。基于该模型,计算获得该传动系统正常润滑条件下的稳态温度场,并以它作为初始条件计算分析该传动系统失去润滑条件下的瞬态温度场,为预测该弧齿锥齿轮传动系统在失去润滑条件下的干运转生存能力提供理论依据。     

基于ARMA辨识的色噪系统状态参数鲁棒估计

实际环境中观测系统的噪声,同时存在着白噪、色噪声和尖点噪声的影响.已有的研究都仅考虑白噪或色噪声,首次将实际系统中可能出现的所有噪声纳入观测方程,推导出统一的带白噪形式的观测方程.新观测方程在色噪声ARMA辨识基础上,可以直接用于传统的卡尔曼滤波算法,避免了扩维滤波.于是状态参数的稳健估计归结为ARMA参数的辨识.重点研究了自由参数选取与输入噪声之间的关系,将鲁棒支持向量回归机的优化问题转换成最大后验估计问题,为合理选择自由参数提供了理论依据.仿真结果验证了新算法的有效性.