An efficient and modular modeling for launch dynamics of tubed rockets on a moving launcher

This paper develops a modular modeling and efficient formulation of launch dynamics with marching fire (LDMF) using a mixed formulation of the transfer matrix method for multibody systems (MSTMM) and Newton-Euler formulation. Taking a ground-borne multiple launch rocket systems (MLRS), the focus is on the launching subsystem comprising the rocket, flexible tube, and tube tail. The launching subsystem is treated as a coupled rigid-flexible multibody system, where the rocket and tube tail are treated as rigid bodies while the flexible tube as a beam with large motion. Firstly, the tube and tube tail can be elegantly handled by the MSTMM, a computationally efficient order-N formulation. Then, the equation of motion of the in-bore rocket with relative kinematics w.r.t. the tube using the Newton-Euler method is derived. Finally, the rocket, tube, and tube tail dynamics are coupled, yielding the equation of motion of the launching subsystem that can be regarded as a building block and further integrated with other subsystems. The deduced dynamics equation of the launching subsystem is not limited to ground-borne MLRS but also fits for tanks, self-propelled artilleries, and other air-borne and naval-borne weapons undergoing large motion. Numerical simulation results of LDMF are given and partially verified by the experiment.     

多次点火固体火箭发动机在面空导弹上的应用研究

论述了多次点火固体火箭发动机的多次点火的最佳控制,具体研究了两次点火固体火箭发动机的参数对飞行性能的影响,对两次点火固体火箭发动机结合弹道同时最佳化问题给出了仿真结果.     

面向目标对峙跟踪的四旋翼协同编队控制方法

针对多四旋翼编队飞行过程中对地面目标对峙跟踪、几何队形生成、稳固保持和协同抗干扰问题,设计了一种可应对外部环境干扰和气动参数不确定性的多四旋翼主从式协同目标跟踪方法。首先,建立存在外部干扰以及参数不确定性的四旋翼运动学/动力学模型;其次,基于Lyapunov导航向量场设计领航者的对峙跟踪航迹使得领航者以固定对峙半径实现对目标的盘旋跟踪;然后,构造多四旋翼分布式位置保持控制器,为后续姿态控制器构造提供必要的期望指令;最后,针对四旋翼外部环境干扰和气动参数不确定性设计基于自抗扰控制的多四旋翼姿态跟踪控制器。仿真结果表明所提方法可以在局部智能体通信的前提下实现对地面目标的对峙跟踪,显著改善四旋翼编队系统的抗干扰能力,提升干扰环境下多四旋翼编队几何构型的稳固性。     

高超声速飞行器巡航段多约束制导方法

针对高超声速飞行器巡航段飞行,建立了等高等速飞行的平衡条件,并对飞行器能否满足平衡条件开展分析。基于平衡条件提出了一种能够满足飞行过程中多约束条件以及终端航向角约束的制导方法,推导得到了满足多约束条件的最优制导律。该方法所有制导指令均采用解析公式实时获得,具有较强适应性。在各种偏差条件下对方法进行了仿真,仿真结果验证了方法的有效性。     

一种多目标跟踪航迹起始新算法及其性能评估

文中提出了一种多目标跟踪的航迹起始新算法，并对算法的性能进行了详细的理论推导，得出了正确航迹建立概率和虚假航迹建立概率的解析表达式，蒙特卡洛仿真验证了分析的正确性。     

神经网络在目标属性识别中的应用研究

首先介绍了目标属性识别的方法,并对多属性决策模型(MultipleAttributeDecisionModel,MADM)目标属性识别模型进行了分析,在此基础上提出了基于神经网络的目标属性识别模型,其能有效地解决目标属性识别问题。     

Integrated guidance and control of guided projectile with multiple constraints based on fuzzy adaptive and dynamic surface

Based on fuzzy adaptive and dynamic surface (FADS), an integrated guidance and control (IGC) approach was proposed for large caliber naval gun guided projectile, which was robust to target maneuver, canard dynamic characteristics, and multiple constraints, such as impact angle, limited measurement of line of sight (LOS) angle rate and nonlinear saturation of canard deflection. Initially, a strict feedback cascade model of IGC in longitudinal plane was established, and extended state observer (ESO) was designed to estimate LOS angle rate and uncertain disturbances with unknown boundary inside and outside of system, including aerodynamic parameters perturbation, target maneuver and model errors. Secondly, aiming at zeroing LOS angle tracking error and LOS angle rate in finite time, a nonsingular terminal sliding mode (NTSM) was designed with adaptive exponential reaching law. Furthermore, combining with dynamic surface, which prevented the complex differential of virtual control laws, the fuzzy adaptive systems were designed to approximate observation errors of uncertain disturbances and to reduce chatter of control law. Finally, the adaptive Nussbaum gain function was introduced to compensate nonlinear saturation of canard deflection. The LOS angle tracking error and LOS angle rate were convergent in finite time and whole system states were uniform ultimately bounded, rigorously proven by Lyapunov stability theory. Hardware-in-the-loop simulation (HILS) and digital simulation experiments both showed FADS provided guided projectile with good guidance performance while striking targets with different maneuvering forms.     

电子可编程模拟器件 IMP50E30 特性及其应用

详细介绍了电子可编程模拟器件（ＥＰＡＣ）的主要技术特点及其典型芯片ＩＭＰ５０Ｅ３０,并给出了它在多路测量中的应用实例．     

单兵数字化系统外部通信研究——“数字化战场与单兵数字化系统”系列论文之六

讨论了单兵数字化系统外部通信的功能结构和实现途径，以及战场信息网的无线电网和地域网实现。重点研究了联合战术信息分布系统ＪＴＩＤＳ，包括其ＴＤＭＡ工作方式和多网工作原理。最后研究了单兵数字化系统通信的一个安全问题。     

Influence of multiple structural parameters on interior ballistics based on orthogonal test methods

Influence of multiple structural parameters on the performance of a gun launch system driven by high-pressure reactive gases is important for structural design and performance adjustment. A coupled lumped parameter model was utilized to predict the propellant combustion, and a dynamic finite element method was applied to approximate the mechanical interactions between the projectile and the barrel. The combustion and the mechanical interactions were coupled through a user subroutine interface in ABAQUS. The correctness and the capability of the finite element approximations in capturing small structural changes were validated by comparing predicted resistance with experiments. Based on the coupled model, the influence of structural parameters of a medium-caliber gun on the system performance was investigated. In order to reduce the research costs, orthogonal tests were designed to investigate the comprehensive effects of the parameters. According to statistical analysis, the important order of the structural parameters on the launching process was obtained. The results indicate that the influence of the width of the rotating band stands out among the studied parameters in the gun. The work provides a method to investigate the influence of multiple parameters on system performance and gives guidance for controlling the system performance.