C~3I系统EMC初探

ＥＭＣ是Ｃ３Ｉ系统的一项重要性能指标。文章从Ｃ３Ｉ系统ＥＭＣ实际存在的问题出发, 论述了ＥＭＣ与ＥＷ 的关系及Ｃ３Ｉ系统ＥＭＣ值得考虑的若干问题。     

具有指定误差协方差的相关域预测方法

利用协方差控制的理论和方法,研究了Ｃ３Ｉ系统中航迹数据融合的未来点相关域预测问题,提出了根据格定预测误差协方差来确定目标航迹未来点所处的相关域位置及大小的新方法。该方法具有实时性好、计算量小的特点。仿真结果表明了该方法的可行性。     

国外指控与火控系统的最新进展

本文主要介绍国外高炮、坦克和防空指挥控制系统和通信系统的最新进展与发展特点。     

混合物薄膜折射率与膜孔洞率关系研究

本文对TiO_2和Ta_2O_5混合膜进行了单源共蒸发实验研究。在实验结果的基础上,提出了一个拟合TiO_2、Ta_2O_5混合膜系孔洞率的经验公式,并对混合膜的折射率的计算过程进行了改进。结果表明:理论计算与实验数据符合较好;混合物薄膜可能形成孔洞率较小的膜层,从而导致混合物薄膜折射率随混合百分比的变化曲线出现峰值。     

基于面向对象技术的载人长征二号F应急救生半实物仿真系统

概要介绍了基于面向对象技术的长征二号F火箭应急救生半实物仿真系统的组成和应用.     

WINDOWS系统中的QoS保障机制研究

针对微软提出的常规服务质量(GeneralQualityofService,简称GQoS)的QoS解决方案,讨论了WINDOWS系统中的QoS保障机制。通过WINSOCK2的API函数设计程序,进行了Win98上的QoS性能测试。结果表明,在QoS启用的情况下,数据的传输时间和延迟抖动明显减小,说明WINDOWS系统中的QoS保障机制有效。     

Sr2FeNbO6的晶体结构

系统地研究了Sr2FeNbO6的晶体结构,并利用步进扫描的X光数据成功地确定了Sr2FeNbO6的晶体结构,利用Rietveld方法精修出Sr2FeNbO6是空间群为Pnma(62)的正交结构,其中,晶胞参数分别为a=5.616 1A,b=7.971 7A,c=5.613 0A.     

Optimization of buckling load for laminated composite plates using adaptive Kriging-improved PSO: A novel hybrid intelligent method

An effective hybrid optimization method is proposed by integrating an adaptive Kriging (A-Kriging) into an improved partial swarm optimization algorithm (IPSO) to give a so-called A-Kriging-IPSO for maxi-mizing the buckling load of laminated composite plates (LCPs) under uniaxial and biaxial compressions. In this method, a novel iterative adaptive Kriging model, which is structured using two training sample sets as active and adaptive points, is utilized to directly predict the buckling load of the LCPs and to improve the efficiency of the optimization process. The active points are selected from the initial data set while the adaptive points are generated using the radial random-based convex samples. The cell-based smoothed discrete shear gap method (CS-DSG3) is employed to analyze the buckling behavior of the LCPs to provide the response of adaptive and input data sets. The buckling load of the LCPs is maximized by utilizing the IPSO algorithm. To demonstrate the efficiency and accuracy of the proposed methodology, the LCPs with different layers (2, 3, 4, and 10 layers), boundary conditions, aspect ratios and load patterns (biaxial and uniaxial loads) are investigated. The results obtained by proposed method are in good agreement with the literature results, but with less computational burden. By applying adaptive radial Kriging model, the accurate optimal results-based predictions of the buckling load are obtained for the studied LCPs.     

The effect of al particle size on thermal decomposition,mechanical strength and sensitivity of Al/ZrH2/PTFE composite

To study the thermal decomposition of Al/ZrH2/PTFE with different Al particle size as well as mechanical strength and impact sensitivity under medium and low strain rates, molding-vacuum sintering was adopted to prepare four groups of power materials and cylindrical specimens with different Al particle size. The active decomposition temperature of ZrH2 was obtained by TG-DSC, and the quasi-static me-chanics/reaction characteristics as well as the impact sensitivity of the specimen were studied respec-tively by quasi-static compression and drop-hammer test. The results show that the yield strength of the material decreased with the increase of the Al particle size, while the compressive strength, failure strain and toughness increased first and then decreased, which reached the maximum values of 116.61 MPa, 191％, and 119.9 MJ/m respectively when the Al particle size is 12—14μm because of particle size grading. The specimens with the highest strength and toughness formed circumferential open cracks and reacted partly when pressed. Those with developmental cracks formed inside did not react. It is considered that fracture of specimens first triggered initial reaction between Al and PTFE to release an amount of heat. Then ZrH2 was activated and decomposed, and participated in subsequent reaction to generate ZrC. The impact sensitivity of the specimens decreased with the increase of Al particle size.     

非晶态Ni-P合金化学镀镀液的稳定性研究

采用PdCl2溶液的稳定性试验方法,对非晶态Ni-P合金化学镀镀液(ZFHN防腐蚀镀液)的稳定性和试验条件进行了关系曲线测试及分析.规定和提出了其试验条件和最佳控制参数;试验镀液中PdCl2的最佳浓度是2.4 mg/L、可靠的pH值范围为4.0～5.0.温度、搅拌、PdCl2用量、镀液pH值是决定镀液稳定时间的重要试验条件和试验偏差大的主要因素.研究镀液的稳定性高、组分协同稳定性好,稳定试验时间大于3 min.