基于LBP-PCA的多传感器目标识别算法

为了更加有效地提高多传感器图像融合后的识别率,提出一种基于LBP-PCA的多传感器目标识别算法。首先分别对红外和可见光图像进行预处理用以突显出要识别的目标,采用LBP算法提取目标的特征点向量,利用PCA算法进行特征融合,得到降维后的融合特征,最后利用SVM(支持向量机)进行分类和识别。实验仿真结果表明多传感器目标经过LBP-PCA融合后在保持足够数量的有效信息基础上降低了特征的维数,有效地提高了目标识别率。     

星载AIS检测概率建模与仿真分析

针对现有星载AIS检测概率低的问题,对星载AIS接收信号冲突和检测概率进行了研究和论证,并对影响检测概率的诸多因素进行了分析。分析了星载AIS与地面AIS的差异性,指出了星载AIS面临的新挑战。重点对星载AIS信号多网冲突问题进行了研究,建立了一种基于船舶分布密度函数的星载AIS检测概率模型。通过分析时隙冲突、船舶动态、轨道高度、天线类型和B类AIS船舶等因素对系统检测概率的影响,为工程设计和性能评估提供了一定参考依据。     

On the uncapacitated K‐commodity network design problem with zero flow‐costs

Extending Sastry's result on the uncapacitated two‐commodity network design problem, we completely characterize the optimal solution of the uncapacitated K‐commodity network design problem with zero flow costs for the case when K = 3. By solving a set of shortest‐path problems on related graphs, we show that the optimal solutions can be found in O(n³) time when K = 3, where n is the number of nodes in the network. The algorithm depends on identifying a list of “basic patterns”; the number of basic patterns grows exponentially with K. We also show that the uncapacitated K‐commodity network design problem can be solved in O(n³) time for general K if K is fixed; otherwise, the time for solving the problem is exponential. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

分布式系统仿真技术研究及其实现

以舰炮武器系统全数字仿真为例 ,讨论了分布式仿真系统的设计过程 ,提出了仿真系统的体系结构、网络通信方案、多任务并发控制等分布式仿真中关键问题的解决方法     

战场目标声/震侦察与识别

介绍了一个采用被动侦察体制的多传感器侦察系统。在研究了地面战场典型目标的噪声场和地震动场产生机理的基础上 ,对战场目标噪声信号和地震动信号进行功率谱估计 ,分析了各种目标的线谱特性。设计了拓扑结构合适的 BP神经网络分类器 ,可以有效地分类识别战场典型目标     

The resource constrained project scheduling problem with multiple crashable modes: An exact solution method

We introduce a formulation and an exact solution method for a nonpreemptive resource constrained project scheduling problem in which the duration/cost of an activity is determined by the mode selection and the duration reduction (crashing) within the mode. This problem is a natural combination of the time/cost tradeoff problem and the resource constrained project scheduling problem. It involves the determination, for each activity, of its resource requirements, the extent of crashing, and its start time so that the total project cost is minimized. We present a branch and bound procedure and report computational results with a set of 160 problems. Computational results demonstrate the effectiveness of our procedure. © 2001 John Wiley & Sons, Inc. Naval Research Logistics 48: 107–127, 2001     

Optimal material control in an assembly system with component commonality

Allocation of scarce common components to finished product orders is central to the performance of assembly systems. Analysis of these systems is complex, however, when the product master schedule is subject to uncertainty. In this paper, we analyze the cost—service performance of a component inventory system with correlated finished product demands, where component allocation is based on a fair shares method. Such issuing policies are used commonly in practice. We quantify the impact of component stocking policies on finished product delays due to component shortages and on product order completion rates. These results are used to determine optimal base stock levels for components, subject to constraints on finished product service (order completion rates). Our methodology can help managers of assembly systems to (1) understand the impact of their inventory management decisions on customer service, (2) achieve cost reductions by optimizing their inventory investments, and (3) evaluate supplier performance and negotiate contracts by quantifying the effect of delivery lead times on costs and customer service. © 2001 John Wiley & Sons, Inc. Naval Research Logistics 48:409–429, 2001     

Effectiveness of (R,Q) policies in one‐warehouse multiretailer systems with deterministic demand and backlogging

Consider a distribution system with a central warehouse and multiple retailers. Customer demand arrives at each of the retailers continuously at a constant rate. The retailers replenish their inventories from the warehouse which in turn orders from an outside supplier with unlimited stock. There are economies of scale in replenishing the inventories at both the warehouse and the retail level. Stockouts at the retailers are backlogged. The system incurs holding and backorder costs. The objective is to minimize the long‐run average total cost in the system. This paper studies the cost effectiveness of (R, Q) policies in the above system. Under an (R, Q) policy, each facility orders a fixed quantity Q from its supplier every time its inventory position reaches a reorder point R. It is shown that (R, Q) policies are at least 76% effective. Numerical examples are provided to further illustrate the cost effectiveness of (R, Q) policies. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 422–439, 2000     

基于遗传算法的观察所优化配置

文章研究了三维地形中的观察所优化配置问题,结合观察所实际情况,给出了利用遗传算法进行观察所优化的计算方法,并编制了计算机应用程序.计算机模拟实验表明,文中采用的算法能综合考虑多种因素,所得结果合理、准确,并且具有较高的效率.     

采用弹道修正技术的红外干扰弹性能优化

针对弹道修正弹的高维非线性特性导致的性能优化难题,改变概念设计阶段传统的串行设计方式,提出了一种基于实验设计(Design Of Experiments,DOE)和响应面(Response Surface Methodology,RSM)的智能优化算法,定义基本的弹丸结构模型以及相关的设计参数.在DOE的基础上,将设计...