饱和系统的线性最优容错不变集

针对饱和系统的容错控制问题,提出了一种D稳定约束下系统吸引域的估计方法。分别以不变集和参考集的容量为优化目标,给出了两个优化容错不变集的充分条件。为解决不变集优化中出现的双线性矩阵不等式(BMI)问题,通过构造包含线性矩阵不等式(LMI)的目标函数,将它转化为非线性规划的形式进行求解。通过一个仿真实例对该方法进行验证。     

一种新型SEU/SET加固鉴频鉴相器设计

分析验证了传统D触发器型PFD结构的SEE敏感性,提出了一种新型的SEU/SET加固鉴频鉴相器,SPICE模拟结果表明该结构功能正确,对于1GHz的时钟信号,鉴频鉴相的精度可达0.8rad.锁相环的整体模拟结果表明,抗辐照的PFD与传统的PFD相比,锁相环的电学性能没有改变,锁定时间保持一致.对传统D触发器型PFD和设计加固的PFD进行了遍历轰击模拟,结果显示,提出的抗辐照PFD加固效果非常明显,敏感节点的数目可以降低80%左右.     

SiC纤维表面CVD SiC涂层对其单丝强度的影响

采用化学气相沉积(CVD, Chemical Vapor Deposition)工艺在KD-I型SiC纤维表面制备了SiC涂层,选择2h、4h、6h和8h四个时间点研究了沉积时间对纤维性能的影响.结果表明:具有CVD SiC涂层的SiC纤维较无涂层的纤维来说强度有所下降;在所研究的沉积时间范围内,随着沉积时间的增加,涂层的厚度有所增加,涂层由不连续的岛状转变为连续层状,纤维的单丝强度出现了先升后降的趋势.     

基于分数阶傅立叶变换的ARM检测技术

分数阶傅立叶变换(FRFT)是傅立叶变换的广义形式,对线性调频(LFM)信号具有很好的能量积累作用.针对反辐射导弹(ARM)雷达回波信号的线性调频特性,提出了一种基于FRFT的反辐射导弹检测方法,并根据ARM信号的调频特性将FRFF局域化,缩小了峰值搜索区域,提高了检测效率.仿真实验表明该方法能够在高斯、非高斯分布杂波环境下有效地检测ARM信号.     

含非线性介质Fabry-Perot腔混沌研究

根据混沌动力学的基本理论 ,计算了含非线性介质Fabry Perot腔动力学方程在其参数下的Lya punov指数分布图。利用Lyapunov指数和动力学特性的对应关系 ,分析出非线性Fabry Perot腔在各种参数下的动力学特性、稳态参数区域面积和混沌转换机制     

应用交互多模(IMM)算法跟踪低空目标

雷达跟踪低空目标时,由于多路径传播的影响,目标俯仰角的测量会出现测量误差.并且由多路径传播引起的测量噪声方差较大,在时间上具有相关性.应用交互多模(IMM)算法来提高跟踪低空目标的性能,并且提出了一种去相关的滤波方法来克服多径误差相关性的影响,最后给出了计算机仿真的滤波结果.     

舷外有源诱饵反导方法研究

为提高电子战反导水平和导弹突防能力,根据反导电子战装备发展的趋势,介绍了舷外有源诱饵的原理和特点,分析了欺骗干扰、压制干扰和组合干扰3种舷外有源诱饵作战使用的典型模式,从实际试验和仿真2方面研究了舷外有源诱饵对抗反击导弹的效果.研究内容对反导电子战装备的研发和作战使用以及反舰导弹突防研究具有一定参考价值.     

一种RetinaNet与SE融合的航空取证目标检测算法

针对在开展航空侦察取证时缺乏自动化、智能化取证手段的情况,提出了一种基于Reti-naNet与SE融合的航空取证目标检测算法,解决目标尺度变化大、数据集中类别不均衡的问题,并通过SE (squeeze-excitations)模块引入注意力机制进一步改进性能.该改进算法中的特征金字塔网络FPN可有效应对目标尺寸变化较大...     

Periodic review inventory management with contingent use of two freight modes with fixed costs

We study a stochastic inventory model of a firm that periodically orders a product from a make‐to‐order manufacturer. Orders can be shipped by a combination of two freight modes that differ in lead‐times and costs, although orders are not allowed to cross. Placing an order as well as each use of each freight mode has a fixed and a quantity proportional cost. The decision of how to allocate units between the two freight modes utilizes information about demand during the completion of manufacturing. We derive the optimal freight mode allocation policy, and show that the optimal policy for placing orders is not an (s,S) policy in general. We provide tight bounds for the optimal policy that can be calculated by solving single period problems. Our analysis enables insights into the structure of the optimal policy specifying the conditions under which it simplifies to an (s,S) policy. We characterize the best (s,S) policy for our model, and through extensive numerical investigation show that its performance is comparable with the optimal policy in most cases. Our numerical study also sheds light on the benefits of the dual freight model over the single freight models. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

Quantifying the performance effects of idle time utilization in multiserver systems

In many practical multiserver queueing systems, servers not only serve randomly arriving customers but also work on the secondary jobs with infinite backlog during their idle time. In this paper, we propose a c‐server model with a two‐threshold policy, denoted by (e d), to evaluate the performance of this class of systems. With such a policy, when the number of idle servers has reached d (<c), then e (<d) idle agents will process secondary jobs. These e servers keep working on the secondary jobs until they find waiting customers exist in the system at a secondary job completion instant. Using the matrix analytic method, we obtain the stationary performance measures for evaluating different (e, d) policies. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2007.