聚氨酯/环氧树脂SIN中的增塑作用初探

本文通过测量聚醚氨酯(PU)/环氧树脂(EP)SIN系列的玻璃化转变温度(Tg);并对该数据进行分析及用DiBenedetto理论式对该Tg数据进行了处理,发现PU/EP SIN中,EP对PU链段存在着较强的增塑作用,这个增塑作用与PU与EP网间的互穿作用并存,它主要受PU/EP组成配比等因素的影响。     

双三次参数曲面片的逼近求交法

本文提出了一种新的曲面求交方法,这种方法基于曲面控制网格的“子”分方法,只要控制网格足够逼近曲面,则通过对控制网格处理一系列特殊的直线与三角形求交问题,就可迅速、逼近地求出两张双三次曲面片的交线。     

基于面向对象技术的载人长征二号F应急救生半实物仿真系统

概要介绍了基于面向对象技术的长征二号F火箭应急救生半实物仿真系统的组成和应用.     

基于BP人工神经网络的GPS/SINS组合导航算法

基于扩展Kalman滤波的GPS/SINS组合导航算法,需要对原始的非线性连续系统模型进行线性化和离散化处理,要求系统噪声和测量噪声为零均值的高斯白噪声,且易于出现滤波器发散。BP人工神经网络无需对所求解的问题建模,能够很好地逼近系统非线性特性,获得较高精度的导航定位信息;还具有计算过程稳定,不涉及矩阵求逆,不需要迭代逼近,以及容易实现并行处理等优点。设计适用于GPS/SINS组合导航系统的BP网络模型,并在标准的BP算法基础上,采用共轭梯度法改进网络训练速度及精度。最后,通过仿真算例说明BP网络方法用于GPS/SINS组合导航计算的可行性。     

ZCS半桥式DC/DC变流器状态空间法建模及Matlab仿真分析

分析了一种ZCS半桥式DC DC变流器时域工作特性.通过研究其工作各阶段的特性建立了其状态空间模型,采用Matlab语言进行编程仿真,得到其输出电压时域仿真波,与实测吻合,证明了所建状态空间模型的正确性,得到变流器工作的一些有用结论,有助于指导下一步变流器的传导干扰分析和抑制.     

WINDOWS系统中的QoS保障机制研究

针对微软提出的常规服务质量(GeneralQualityofService,简称GQoS)的QoS解决方案,讨论了WINDOWS系统中的QoS保障机制。通过WINSOCK2的API函数设计程序,进行了Win98上的QoS性能测试。结果表明,在QoS启用的情况下,数据的传输时间和延迟抖动明显减小,说明WINDOWS系统中的QoS保障机制有效。     

Sr2FeNbO6的晶体结构

系统地研究了Sr2FeNbO6的晶体结构,并利用步进扫描的X光数据成功地确定了Sr2FeNbO6的晶体结构,利用Rietveld方法精修出Sr2FeNbO6是空间群为Pnma(62)的正交结构,其中,晶胞参数分别为a=5.616 1A,b=7.971 7A,c=5.613 0A.     

AMESim与MATLAB/Simulink联合仿真技术及应用

分析了AMESim与MATLAB/Simulink的特点,对两者的联合仿真技术进行了研究,解决了联合仿真的接口问题.并把该技术应用于主动悬架系统,取得了良好效果.     

高温空气下C/SiC复合材料力学性能测试

测试了C/SiC复合材料在高温空气下的压缩、弯曲和拉伸性能,利用扫描电子显微镜分析复合材料在室温与高温条件下的断口微观形貌。结果表明:从室温升温到1 000 ℃测试温度时,C/SiC复合材料的压缩强度由247 MPa降低至78 MPa,性能降低68%;弯曲强度由480 MPa降低至277 MPa,性能降低42%;拉伸强度由247 MPa降低至152 MPa,性能降低38%。高温氧化导致界面退化,损伤材料基体与碳纤维结构,加剧了纤维断裂程度,改变了纤维与基体的结合状态,纤维增韧机制逐渐消失,导致复合材料性能下降。     

Experimental and numerical investigations of interface properties of Ti6Al4V/CP-Ti/Copper composite plate prepared by explosive welding

Explosive welding technique is widely used in many industries. This technique is useful to weld different kinds of metal alloys that are not easily welded by any other welding methods. Interlayer plays an important role to improve the welding quality and control energy loss during the collision process. In this paper, the Ti6Al4V plate was welded with a copper plate in the presence of a commercially pure titanium interlayer. Microstructure details of welded composite plate were observed through optical and scanning electron microscope. Interlayer-base plate interface morphology showed a wavy structure with solid melted regions inside the vortices. Moreover, the energy dispersive spectroscopy analysis in the interlayer-base interface reveals that there are some identified regions of different kinds of chemical equilibrium phases of Cu–Ti, i.e. CuTi, Cu₂Ti, CuTi₂, Cu₄Ti, etc. To study the mechanical properties of composite plates, mechanical tests were conducted, including the tensile test, bending test, shear test and Vickers hardness test. Numerical simulation of explosive welding process was performed with coupled Smooth Particle Hydrodynamic method, Euler and Arbitrary Lagrangian-Eulerian method. The multi-physics process of explosive welding, including detonation, jetting and interface morphology, was observed with simulation. Moreover, simulated plastic strain, temperature and pressure profiles were analysed to understand the welding conditions. Simulated results show that the interlayer base plate interface was created due to the high plastic deformation and localized melting of the parent plates. At the collision point, both alloys behave like fluids, resulting in the formation of a wavy morphology with vortices, which is in good agreement with the experimental results.