Holonic-C2组织决策分配及演化方法

为了有效发挥指挥控制(Command and Control, C2)组织集中式决策和协作式决策的决策优势,对具有决策权限动态变化能力的Holonic-C2组织的决策分配问题进行研究。针对群决策中专家固定权重的主观性太强的缺点,提出基于专家权威性和意见一致性相结合的专家组选择方法,提高了决策分配过程中多属性决策的客观合理性;针对决策分配的动态演化问题,提出基于多阶段决策的决策模式演化机制,在考虑属性前后阶段的变化的基础上,给出相邻阶段决策模式跃迁方法。仿真结果表明,所提方法能够给出相对客观的决策模式的优劣排序以及多阶段的演化路线,从而证明了方法的可行性和有效性。     

相似分布特性准则下的高斯混合项聚类-合并算法

针对高斯混合模型估计非高斯系统时高斯混合项呈指数级增长问题,提出一种基于相似分布特性准则的聚类-合并方法。通过分析高斯混合项的分布特性,基于扩展积分均方误差代价函数搜索最优置信范围,并对混合项进行高斯聚类,进而获得具有不同分布特性的高斯簇。为防止高斯簇间对高斯子项的重复利用,引入局部最近邻思想对交叉高斯项进行重新分配。采用并行多元素合并方法对高斯簇中的混合项进行合并,在保证无偏性基础上减少下一时刻混合项数量。仿真结果表明,改进算法在保证跟踪精度的同时还可有效提高算法效率。     

船舶轴频电场跟踪

针对轴频电场包络跟踪中先验信息缺失的问题,研究了船舶轴频电场跟踪对传感器阵列的基本要求,引入了一种基于最大似然选择的多初值渐进更新扩展卡尔曼滤波算法。建立船舶轴频电场包络跟踪的状态空间模型,用水平电偶极子对船舶轴频电场包络进行建模;建立基于最大似然选择的多初值模型;基于轴频包络信号特征,研究了对传感器阵列排布方式的要求。仿真结果表明,利用轴频电场包络对船舶进行跟踪是可行的,要求传感器阵列至少由3个传感器组成,且3个传感器不在一条直线上;在传感器阵列满足要求的情况下,该算法可以有效解决轴频电场包络跟踪中的先验信息缺失问题,具有较高的实用价值。     

近地卫星Ka频段数传链路抗雨衰自适应模式设计

针对近地卫星数传时的信道时变性和严重的Ka频段雨衰现象,采用自适应编码调制(Adaptive Coding and Modulation, ACM)技术能够充分利用链路资源,相对于传统的固定编码调制方式,进一步提高链路的数据吞吐量。提出近地卫星Ka频段数传链路ACM模式设计方法,在降雨环境下建立Ka频段数传链路模型,根据链路预算的信道状况确定ACM选用模式;采用基于导频符号的最大似然信噪比估计算法结合移动平均的平滑方法实现信道估计,有效地减小了估计值的波动。仿真结果表明,无论晴天还是雨天,采用提出的卫星数传链路ACM模式设计方法,能够在保证系统可靠性的同时获取较高的数据吞吐量。     

高超声速滑翔导弹气动参数自适应跟踪建模

针对高超声速滑翔导弹跟踪中状态模型构建问题,研究基于制导变量变化规律的气动参数建模方法。对气动参数进行分析,指出传统建模方法的缺点。在假设制导变量服从一阶时滞过程的前提下,利用线性化的气动系数推导气动参数模型,通过分析不同飞行状态下的模型变式,证明模型对目标机动具有自适应性。对模型中未知参数的取值问题进行讨论,实现模型与飞行状态的自适应匹配。仿真结果表明：当目标发生机动时,所提模型性能明显优于传统模型。同时,在不同滤波器参数条件下的仿真结果进一步证实了模型的有效性。     

PMI泡沫夹层结构雷达天线罩间接热-结构耦合分析与实验研究

机载PMI泡沫夹层结构雷达天线罩在环境温度变化时将产生表面变形现象并影响其使用性能,但对天线罩热变形结果进行实时检测分析具有一定难度。通过ANSYS间接热-结构耦合法建立了分析模型,对天线罩进行了计算分析,采用热膨胀片状模型进行了理论分析,在此基础上,设计并开展了温度冲击实验研究。结果表明, PMI夹层结构天线罩的热-结构耦合变形综合应变趋势是棱边处膨胀程度最大,由边缘至天线罩透波面中心处,膨胀程度逐渐减小;间接热-结构耦合计算应变值与实测应变值之间平均相差35.08%,间接热-结构耦合分析方法与模型具有一定的可信性。     

Robust shortest path planning and semicontractive dynamic programming

In this article, we consider shortest path problems in a directed graph where the transitions between nodes are subject to uncertainty. We use a minimax formulation, where the objective is to guarantee that a special destination state is reached with a minimum cost path under the worst possible instance of the uncertainty. Problems of this type arise, among others, in planning and pursuit‐evasion contexts, and in model predictive control. Our analysis makes use of the recently developed theory of abstract semicontractive dynamic programming models. We investigate questions of existence and uniqueness of solution of the optimality equation, existence of optimal paths, and the validity of various algorithms patterned after the classical methods of value and policy iteration, as well as a Dijkstra‐like algorithm for problems with nonnegative arc lengths.© 2016 Wiley Periodicals, Inc. Naval Research Logistics 66:15–37, 2019     

Stage life testing

In progressive censoring, items are removed at certain times during the life test. Commonly, it is assumed that the removed items are used for further testing. In order to take into account information about these additional testing in inferential procedures, we propose a two‐step model of stage life testing with one fixed stage‐change time which incorporates information about both the removed items (further tested under different conditions) and those remaining in the current life test. We show that some marginal distributions in our model correspond either to progressive censoring with a fixed censoring time or to a simple‐step stress model. Furthermore, assuming a cumulative exposure model, we establish exact inferential results for the distribution parameters when the lifetimes are exponentially distributed. An extension to Weibull distributed lifetimes is also discussed.     

Pairwise model discrimination with applications in lifetime distributions and degradation processes

Reliability data obtained from life tests and degradation tests have been extensively used for purposes such as estimating product reliability and predicting warranty costs. When there is more than one candidate model, an important task is to discriminate between the models. In the literature, the model discrimination was often treated as a hypothesis test and a pairwise model discrimination procedure was carried out. Because the null distribution of the test statistic is unavailable in most cases, the large sample approximation and the bootstrap were frequently used to find the acceptance region of the test. Although these two methods are asymptotically accurate, their performance in terms of size and power is not satisfactory in small sample size. To enhance the small‐sample performance, we propose a new method to approximate the null distribution, which builds on the idea of generalized pivots. Conventionally, the generalized pivots were often used for interval estimation of a certain parameter or function of parameters in presence of nuisance parameters. In this study, we further extend the idea of generalized pivots to find the acceptance region of the model discrimination test. Through extensive simulations, we show that the proposed method performs better than the existing methods in discriminating between two lifetime distributions or two degradation models over a wide range of sample sizes. Two real examples are used to illustrate the proposed methods.     

箭(弹)级间螺栓法兰连接结构冲击失效实验与数值仿真

基于火箭(导弹)级间螺栓法兰连接结构,简化设计并制作了一组原理性实验件,利用ABAQUS软件建立有限元模型,设计并进行了多次落锤冲击失效实验,其中包括轴向和横向两种工况,考虑了螺栓均布与非均布、螺栓直径和螺栓-栓孔间隙等不同结构特点。实验过程中采集了螺栓力时程响应数据、柱段关键点应变时程响应数据、锤头冲击力和冲击速度及连接界面开缝位移等多组数据。根据实验效果和实测数据,分析了连接结构冲击失效机理,并对比验证发现有限元模型数值模拟效果和精度与实验结果吻合较好。研究结论可为箭(弹)级间连接结构抗冲击设计提供参考。