Effect of particle gradation of aluminum on the explosion field pressure and temperature of RDX-based explosives in vacuum and air atmosphere

To optimize the energy output and improve the energy utilization efficiency of an aluminized explosive, an explosion device was developed and used to investigate the detonation pressure and temperature of R1 (Al6) aluminum powder and the aluminum powder particle gradation of R2 (Al6+Al13), R3 (Al6+Al24) and R4 (Al6+Al flake) in a confined space. By using gas chromatography, quantitative analysis and calculations were carried out to analyze the gaseous detonation products. Finally, the reaction ratios of the aluminum powder and the explosion reaction equations were calculated. The results show that in a confined space, the quasi-static pressures and equilibrium temperature of the aluminum powder in air are higher than in vacuum. In vacuum, the quasi-static pressures and equilibrium temperatures of the samples in descending order are R1>R3>R4>R2 and R3>R4>R1>R2, respectively. In air, the quasi-static pressures and equilibrium temperatures of the samples in descending order are R1>R2>R4>R3 and R1>R4>R2>R3, respectively. R4 (Al6+Al flake) and R3 (Al6+Al24) have relatively higher temperatures after detonation, which shows that the particle gradation method can enhance the reaction energy output of aluminum during the initial reaction stage of the explosion and increase the reaction ratio by 10.6% and 8.0%, respectively. In air, the reaction ratio of Al6 aluminum powder can reach as high as 78.16%, and the reaction ratio is slightly reduced after particle gradation. Finally, the reaction equations of the explosives in vacuum and in air were calculated by quantitative analysis of the explosion products, which provides a powerful basis for the study of RDX-based explosive reactions.     

Dynamic modeling and parameter identification of a gun saddle ring

In this study, a theoretical nonlinear dynamic model was established for a saddle ring based on a dynamic force analysis of the launching process and the structure according to contact-impact theory. The ADAMS software was used to build a parameterized dynamic model of the saddle ring. A parameter identification method for the ring was proposed based on the particle swarm optimization algorithm. A loading test was designed and performed several times at different elevation angles. The response histories of the saddle ring with different loads were then obtained. The parameters of the saddle ring dynamic model were identified from statistics generated at a 50° elevation angle to verify the feasibility and accuracy of the proposed method. The actual loading history of the ring at a 70° elevation angle was taken as the model input. The response histories of the ring under these working conditions were obtained through a simulation. The simulation results agreed with the actual response. Thus, the effectiveness and applicability of the proposed dynamic model were verified, and it provides an effective method for modeling saddle rings.     

多模态图像智能目标识别对抗攻击

基于深度学习模型的新一代智能化多模态(可见光/红外/雷达)图像识别系统已逐步在航空航天情报侦察、人机交互增强作战系统、无人作战平台自动图像目标识别以及多模复合图像末制导等多个军事场景中得到广泛应用.然而,由于深度神经网络模型在理论上存在不完备性和对抗脆弱性、多模态图像目标识别深度网络结构设计与优化在工程上存在迁移性等因...     

提高水雷探测效果的声纳图像增强算法

对灭雷具系统中显控台对高分辨率图像声纳信号进行转换的计算机辅助探测算法进行了探索,重点介绍了一种能够增强声纳图像中目标信号显示效果的先进算法.从而可以使声纳对目标扫描后的图像更加清晰,与背景对比效果更加明显.为便于理解和比较,同时还引用了已经被国外普遍应用的三种其它算法.     

基于细分小波的图像压缩算法研究

层次细节模型LOD(Level of detail)和感兴趣区域模型ROI(Region of Interesting)是静止图像压缩及网络传输技术中两个重要模型.通过将灰度图像网格化,并在图像网格上进行B样条细分小波变换,实现了图像的LOD压缩算法.并通过Gouraud明暗处理技术将网格还原成压缩过的灰度图像;同时,该算法还可方便地通过ROI区域选择,使ROI区域比背景区域获得更好的图像质量.     

图像跟踪系统中机动目标预测的实现

针对装甲车上的图像跟踪系统,提出了一种机动目标预测方法.将目标的运动分解为两部分,即全局运动和局部运动,并根据各自的动态特性分别进行预测.以局部运动预测为重点,通过对机动目标跟踪技术的研究,建立起性能优良的跟踪滤波器,并将其扩展到预测滤波器中对目标的未来运动状态进行预测,从而提出了"交互式多模型预测算法".仿真结果表明,该算法具有预测精度高、自适应能力强的特点,同时给出了计算方法.     

像素级图像融合方法分类与比较

图像融合的目的是将同一场景的多幅图像的互补信息合并成一幅新图像 ,以便更好地对场景进行监视和侦察。介绍了像素级图像融合的几种方法 ,按空间域和变换域对各种方法进行了分类 ,并对各种方法进行了比较。重点评述了小波用于图像融合的优点     

潜望镜图像序列的时域Kalman滤波

根据潜望镜图像序列的噪声模型,提出了用非线性模糊滤波器和自适应Kalman在空域和时域对其进行滤波的方法.     

基于图像处理技术的舰载武器系统对准方法

针对目前舰载武器系统对准方法在实际应用中局限性大的问题,提出了一种基于图像处理技术、利用差分算法的舰载武器系统对准方法,并给出了实现该方法的图像处理算法和程序设计流程以及图像比较基准坐标系的建立方法,使得武器系统的对准工作变得更加方便、快捷和精密.该方法适用于舰载武器系统的对准联调和类似的民用设备.     

嵌入式图像采集系统在军事侦察车中的应用

图像采集系统是军事侦察车中的重要组成部分。针对一种军事侦察车的要求,对嵌入式图像采集系统在军事侦察车中的应用作了有益的探索,采用软件手段实现了图形、字符与视频图像以任意方式叠加的功能,此嵌入式图像采集系统具有技术领先,功能强大,集成度高,用户界面友好的特点,并解决了以往军用图像采集系统容易死机的问题。