伺服系统速度环控制器参数的自整定及优化

针对交流伺服系统速度环控制器参数自整定及优化的需求,为使工程技术人员避免繁琐的调参过程,提出了一种基于转动惯量辨识的速度环控制器参数自整定及优化方法。首先,采用频率法分析伺服系统速度环控制器参数的设计规则;随后,采用遗忘因子递推最小二乘法,对控制器参数设计所需的系统转动惯量进行辨识;最后,在此基础上利用设计的变步长迭代算法,完成控制器参数寻优过程。仿真结果表明,采用遗忘因子递推最小二乘法,能够有效辨识出电机轴端的转动惯量。提出算法进行整定及优化后,速度环控制器参数能使系统具有良好的动态响应和鲁棒性。     

Influence of shaped charge structure parameters on the formation of linear explosively formed projectiles

The research of LEFP (linear explosive forming projectile) is of great value to the development of new warhead due to its excellent performance. To further improve the damage ability of the shaped charge warhead, a special shell overhanging structure was designed to increase the charge based on the traditional spherical charge, in which case the crushing energy of LEFP could be guaranteed. LS-DYNA was used to simulate different charge structures obtained by changing the number of detonation points, the length of shell platform, the radius of curvature and the thickness of liner. The RSM (response surface model) between the molding parameters of LEFP and the structural parameters of charge was established. Based on RSM model, the structure of shaped charge was optimized by using multi-objective genetic algorithm. Meanwhile, the formation process of jet was analyzed by pulsed X-ray photography. The results show that the velocity, length-diameter ratio and specific kinetic energy of the LEFP were closely related to the structural parameters of the shaped charge. After the optimization of charge structure, the forming effect and penetration ability of LEPP had been significantly improved. The experimental data of jet velocity and length were consistent with the numerical results, which verifies the reliability of the numerical results.     

驱护舰编队防空火力分配决策模型研究

驱护舰编队防空火力分配的确定和优化是最大限度地发挥驱护舰编队的整体作战能力的关键。为了高效地发挥驱护舰编队火力优势,用运筹学理论建立了驱护舰编队防空火力分配决策问题的优化模型,分析了各种解决此模型的方法的优缺点,并尝试运用粒子群优化理论(PSO)求解该模型。实例计算分析表明,所提出的方法较好地解决了驱护舰防空火力分配决策问题,为舰艇编队指挥员进行防空火力分配决策提供了一种有效的参考处理方法。     

A stochastic assignment problem

There are n boxes with box i having a quota value Balls arrive sequentially, with each ball having a binary vector attached to it, with the interpretation being that if X_i = 1 then that ball is eligible to be put in box i. A ball's vector is revealed when it arrives and the ball can be put in any alive box for which it is eligible, where a box is said to be alive if it has not yet met its quota. Assuming that the components of a vector are independent, we are interested in the policy that minimizes, either stochastically or in expectation, the number of balls that need arrive until all boxes have met their quotas. © 2014 Wiley Periodicals, Inc. 62:23–31, 2015     

自适应人工蜂群优化的混沌系统参数估计

为了对混沌系统未知参数进行准确估计,改进了人工蜂群优化算法,提出自适应人工蜂群算法的混沌系统参数估计方法。将混沌系统参数估计问题转化为多维变量数值优化问题,利用人工蜂群算法对未知参数进行导向随机搜索。在搜索过程中,通过种群优化程度和解的质量自适应地调整更新步长和解的尝试次数。以Lorenz混沌系统为例进行的仿真实验表明,该方法在无噪声和噪声强度较大的情况下均能够获得较好的估计结果,表现出较强的鲁棒性。     

基于改进粒子群优化算法的微电网孤岛选址定容

分析了在重要孤立系统中采用微电网供电的必要性,在此基础上提出了采用由非支配排序法和拥挤距离排序法改进的粒子群算法进行微电网选址定容,其目的是改进多目标微电网规划问题的优化结果。通过改进算法与基本算法算例结果的对比分析,验证了改进算法在求解孤岛选址定容问题上具有较强的寻优能力、较高的收敛精度和较稳定的最优解,为进一步研究微电网孤岛选址定容问题提供了思路。     

含气膜孔涡轮叶片寿命可靠性设计优化中的网格参数化方法

为了自动实现含气膜孔涡轮叶片寿命的可靠性设计优化,减少其有限元计算时间成本,提出了含气膜孔涡轮叶片的非结构局部网格参数化方法.该网格参数化方法将叶片划分为参数化区域和非参数化区域,分别设计非参数化区域的网格以及参数化区域的网格控制点,更新气膜孔的形状和位置后,保持非参数化区域的网格不变,重构参数化区域的网格.相比于结构...     

前半球中距攻击的轨迹优化方法

为了提升飞行员空战对抗能力,提出了前半球中距攻击轨迹优化方法。首先,建立了矢量方程,并分析了空战中几何态势。其次,综合考虑时间和角度优势,给出了最优轨迹的计算方法。最后,通过仿真实验给出了最优轨迹及相关飞行参数。仿真结果表明,该方法对于解决前半球中距攻击非常有效。     

双层随机机会约束规划的通信干扰任务分配优化仿真

研究不确定条件下的通信干扰任务分配优化问题具有重要的军事意义。基于干扰效益因子的概念,剖析了影响通信干扰任务分配的不确定性因素,建立了基于双层随机机会约束规划的通信干扰任务分配优化模型,设计了遗传蚁群智能算法,实例计算得到了通信干扰任务分配的最佳策略。     

基于遗传算法的装备维修方案多目标优化

针对装备维修方案规划的特点,构建了以维修费用最低和作战能力最大的多目标装备维修方案优化模型,并提出针对该模型求解的改进多目标遗传优化算法。在遗传算法设计中,为保证解集的均匀性和多样性,避免过早收敛,建立了随机权重适应度函数,引入精英保留机制和小生境技术,通过实例对该模型的求解进行了验证。仿真结果表明,所构建的模型合理可行,算法运行高效,为部队装备维修方案的制定提供了一定的借鉴。