Bionic stab-resistant body armor based on triangular pyramid structure

A stab-resistant substrate was designed and realized with a triangular pyramidal structure, inspired by the biological armor model in nature. The stab-resistance behavior and dynamic response mechanisms were studied through numerical simulation and experimental testing of a knife impacting a substrate, and an optimal structural design was obtained accordingly, with a tilted angle of 22.5° and optimal thickness of 1.2 mm. It was shown that the triangular pyramidal structure generated twice the internal energy of the knife than the flat substrate due to the dispersing effect of the structure. The force parallel to the inclination caused a significant scratch on the substrate surface, while the force perpendicular caused obvious substrate deformation. A new riveting method was used to form the total layer, which passed the GA 68—2008 standard. The stab-resistant clothing coupled with the reduced wearing burden could provide effective protection and avoid fatal injuries on security personnel working in dangerous environments. The method provided may enlighten the future design and manufacturing of stab-resistant clothing.     

Opening behavior of PELE perforation on reinforced concrete target

Impact velocity (v0), target strength (fc) and target thickness (hc) are important factors affecting opening damage ((D)) of PELE penetration into RC target. In this paper, based on the three influence factors of v0, fc and hc, experimental and numerical simulation studies on PELE penetration into RC target were carried out. The study results show that: (1) Since interaction force (or penetration resistance) between pro-jectile and target is positively correlated with v0 and fc, with the increase of v0 and fc, deformation mode of jacket is changed from small bending deformation to large bending deformation and then to curling deformation. Therefore, the variation of jacket deformation mode causes opening diameter of RC target to increase first and then to decrease. It is found that the two factors approximately satisfy a quadratic function relationship, respectively. (2) For PELE projectile penetrating RC targets with thickness of 80—400 mm, the opening diameter of six sets of RC targets grows from 240 to 500 mm, and hc with (D) approximately satisfy a linear relationship. (3) Based on the above study results, the relationship be-tween two dimensionless parameters (I= (mv20/d31fc) and H= hc/l ) and dimensionless opening diameter ((D)/d1) was determined. Combined with the results of previous research, a dimensionless opening diameter model (D)/d1=f1(Q,G,I)f2(H) was established. By tests verified, the test results are all within ±10％error of the theoretical model, which verifies the accuracy of the model.     

Partial penetration of annular grooved projectiles impacting ductile metal targets

Changing and optimizing the projectile nose shape is an important way to achieve specific ballistic performance. One special ballistic performance is the embedding effect, which can achieve a delayed high-explosive reaction on the target surface. This embedding effect includes a rebound phase that is significantly different from the traditional penetration process. To better study embedment behavior, this study proposed a novel nose shape called an annular grooved projectile and defined its interaction process with the ductile metal plate as partial penetration. Specifically, we conducted a series of low-velocity-ballistic tests in which these steel projectiles were used to strike 16-mm-thick target plates made with 2024-O aluminum alloy. We observed the dynamic evolution characteristics of this aluminum alloy near the impact craters and analyzed these characteristics by corresponding cross-sectional views and numerical simulations. The results indicated that the penetration resistance had a brief decrease that was influenced by its groove structure, but then it increased significantly-that is, the fluctuation of penetration resistance was affected by the irregular nose shape. Moreover, we visualized the distribution of the material in the groove and its inflow process through the rheology lines in microscopic tests and the highlighted mesh lines in simulations. The combination of these phenomena revealed the embed-ment mechanism of the annular grooved projectile and optimized the design of the groove shape to achieve a more firm embedment performance. The embedment was achieved primarily by the target material filled in the groove structure. Therefore, preventing the shear failure that occurred on the filling material was key to achieving this embedding effect.     

基于有限理性理论的虚拟士兵感知行为建模研究

针对当前虚拟士兵感知行为模型的缺陷,介绍有限理性理论和基于有限理性虚拟士兵的概念,分析了加入有限理性理论的虚拟士兵的特点,提出了基于有限理性虚拟士兵的感知行为模型。该模型包括有限视觉模型、有限听觉模型和有限记忆模型,基于该感知模型的虚拟士兵在感知、决策和运动能力方面与类似真实士兵具有较高的一致性。这对虚拟士兵的感知行为建模研究具有一定的探索意义。     

导弹反拦截电子对抗

简要叙述了"爱国者"导弹PAC-3·ERINT系统的特点、对抗措施、对抗过程、假目标布设原则、假目标群的发射间隔时间和假目标材料等。     

基于粒子群优化算法的低空突防航迹规划

本文提出了运用粒子群优化算法来对飞机低空突防进行航迹规划的方法。首先,说明了飞机突防需要满足的物理限制和战术要求。其次,根据低空突防航迹规划约束多,计算复杂的特点引入粒子群优化算法,并且对其进行简要的介绍。应用粒子群优化算法对低空突防战术进行航迹规划。最后实验结果表明,该方法能够对飞机低空突防过程规划出可行的飞行航迹。     

觉察压力、社会支持、健康行为关系的路径分析

目的：综合研究觉察压力、社会支持和健康行为间的关系。方法：在问卷调查的基础上采用路径分析的方法,建立三者之间的结构方程模型并进行验证。研究工具：调查问卷：觉察压力量表;领悟社会支持评价量表;报告健康行为量表。结果：①问卷内部一致性信度为：0.701-0.802。②模型各拟合指数为：χ^2/df=1.34（χ^2=104.481,df=78）;GFI（拟合优度指数）=0.898;AGFI（调整拟合优度指数）=0.900;NFI（规范拟合指数）=0.926,TLI（Tucker-Lewis指数）=0.897;CFI（比较拟合指数）=0.912;RMSEA（近似误差均方根）=0.051。说明模型拟合情况良好。结论：应综合开展包括：压力应对、建立社会支持环境、培养良好生活方式在内的心理健康教育。     

Virtools环境下虚拟装备行为控制方法

为解决当前基于Virtools的装备虚拟训练系统中外观模型与机理模型紧密耦合所导致的模型开发效率低、不可重用的问题,分析了虚拟装备仿真模型结构,提出了一种基于Virtools消息机制的虚拟装备行为控制方法,实现了机理模型与外观模型相互分离、彼此独立的开发和维护,提高了模型的可维护性和可重用性。基于该方法开发的“某高炮虚拟训练系统”,已推广至军事院校的教学、训练,其验证了该方法的可行性。     

计划行为理论视角下的学员考试违规行为分析

根据计划行为理论基本原理,通过问卷调查,分析促成学员考试违规行为意向形成的因素,提出相应措施予以适当干预,减少或杜绝考试违规行为发生。     

指挥员作战决策行为的EWA学习模型分析

摘要：为在根本上提高作战决策质量,从行为学角度入手,以指挥员这一“人”为中心,并结合认知科学、心理学等知识对指挥员作战决策行为进行研究。从博弈角度出发,通过引入EWA模型,对指挥员作战决策行为进行分析和优化。结果表明,EWA模型,特别是加入“老练”指挥员后的模型能够明显改善指挥员决策行为,对指挥员,尤其是经验匮乏的指挥员决策行为表现有着重要的作用。