RTM工艺整体成型复合材料连接裙轴压性能

整体成型的固体火箭发动机复合材料连接裙有助于连接裙的减重及其使用性能的提高。本文采用RTM工艺制备出了全复合材料整体连接裙并对其进行了轴压承载性能考核。试验结果表明,RTM工艺整体成型的复合材料连接裙质量均匀,在设计载荷作用下,连接裙的轴向应变远小于0.5%的复合材料许用应变指标,连接裙的轴向表观结构刚度为40.9GPa。     

室内装饰织物燃烧特性研究

室内装饰织物因其容易点燃、燃烧速度快、蔓延迅速等燃烧特性,对室内火灾的发展蔓延及火灾危害都有重要影响。运用锥形量热仪对棉麻、涤纶、帆布、泡纱、条绒等5种室内装饰织物的燃烧性能进行了实验研究,测量了室内装饰织物在不同热辐射条件下的燃烧特性,并对实验数据进行图像拟合,通过具体的实验数据和图像分析比较了5种室内装饰织物在不同热辐射条件下的点燃时间、热释放速率、质量损失速率、比消光面积及CO生成量。最后得出了各种织物的火灾危险性相对大小。     

深紫外非线性晶体KBe_2BO_3F_2的光学倍频特性

通过理论模拟计算详细分析了KBe2BO3F2（KBBF）晶体的光学倍频特性,得到了Nd∶YVO4激光6倍频输出的深紫外激光光源（177.3 nm）的相关技术参数。结果对于KBBF晶体用于产生深紫外全固态激光（DPL）的实验研究提供了重要的理论依据。     

添加SiC微粉对硅树脂先驱体转化3D Cf/Si-O-C材料性能的影响

以三维碳纤维织物和廉价的硅树脂为原料,采用先驱体转化工艺制备3D G/Si-O-C材料,考察了浸渍液中添加SiC填料对材料微观结构、力学性能和抗氧化性能影响.结果表明:添加适量的SiC填料有助于减少基体孔隙,改善界面结合,从而提高材料的力学性能;而SiC含量过高时,容易在材料内部形成闭孔,从而导致材料力学性能下降.当SiC微粉含量为18.2%时,材料具有最好的力学性能,弯曲强度和断裂韧度分别为421.3MPa和13.0 MPa·m1/2;而材料的抗氧化性能随着SiC微粉含量的增加而增加,当SiC微粉含量为25.0%时,材料的弯曲强度保留率最高,达到了89.5%.     

多弧离子镀CrNx涂层的工艺与摩擦磨损性能

为了改善发动机活塞环的摩擦学性能和提高其使用寿命,采用多弧离子镀技术在活塞环表面制备了不同N2含量和弧电流的CrNx硬膜,采用X射线衍射技术、扫描电子显微镜、纳米硬度仪和发动机台架试验装置,分别测试了薄膜相结构、表面形貌、纳米硬度和抗高温摩擦磨损性能。研究结果表明：当N2质量分数为45%时,薄膜纳米硬度相对较高,CrNx薄膜中主要以CrN（220）相为主;随着弧电流的增加,薄膜的表面颗粒尺寸增加,当弧电流为60A时,薄膜纳米硬度相对较高。与Cr电镀层活塞环相比,CrNx涂层活塞环具有较强的抗高温粘着磨损性能。     

功能化离子液体的合成表征及其作为润滑剂的性质

通过两步法合成了含酯基官能团的咪唑类离子液体1-乙酸乙酯基-3-甲基咪唑四氟硼酸盐,用核磁共振、红外光谱、元素分析对其进行了结构表征,证明了该合成方法的可靠性;对功能化离子液体的基本物化性质、熔点、热稳定性及其作为润滑剂的粘温性、蒸发损失、金属腐蚀性等进行了全面研究,并选择了含有相同烷基的1-丁基-3-甲基咪唑四氟硼酸盐传统离子液体进行对比,发现官能团的引入,使传统烷基咪唑类离子液体展现出不同的特性,同时发现两种离子液体均对金属表面有较强的腐蚀作用,为进一步开展功能化离子液体的摩擦学研究打下了基础。     

SiO2气凝胶复合短切莫来石纤维多孔骨架复合材料的制备及性能

将短切莫来石纤维、硅溶胶、B4C粉,经过1260℃烧结制备多孔骨架,以正硅酸乙酯、去离子水和乙醇配制SiO2溶胶,并将多孔骨架与SiO2溶胶浸渍,经过超临界干燥制备SiO2气凝胶复合的莫来石隔热瓦.通过热重和差热分析、X射线能谱分析,表明B4C在700℃～900℃时发生氧化,生成B2O3将短切纤维粘接到一起,莫来石多孔骨架在1500℃以下稳定存在.具有纳米级孔洞结构的SiO2气凝胶填充了多孔骨架的微米级孔洞,隔热瓦的热导率在200℃、500℃、800℃、1000℃分别下降了44.3%、33.8%、34.6%、29.5%.此外,SiO2气凝胶的复合使得抗弯和抗压强度分别提高了50%和40%.     

碳化硼涂覆的碳纤维的抗热氧化性研究

用自己合成的裂解能得到碳化硼的聚碳硼烷,对碳纤维进行涂层,并详细测试了涂层碳纤维的抗热氧化性能。     

The human consequences of foreign military intervention

The empirical international conflict literature has given much recent attention to interstate armed force’s impact on human well-being. While empirical research has advanced our understanding of the phenomenon considerably, we argue that one conclusion that many studies have reached is preliminary. Some recent research contends that only full-scale war, and not force short of war, has a discernable impact on human welfare or physical quality of life (PQOL). We develop theory on one type of force short of war, large-scale foreign military intervention (FMI), and its potential effects on PQOL. Using interrupted time series and panel corrected standard error methodologies, we find that from 1960 to 2005 large-scale FMI had a statistically and substantively significant impact on the PQOL of populations in 106 developing countries. The specific effect that this type of armed force has depended in large part on the regime type of the target country.     

A quasi-isentropic model of a cylinder driven by aluminized explosives based on characteristic line analysis

A quasi-isentropic study on the process of driving a cylinder with aluminized explosives was carried out to examine the influence of the aluminum (Al) reaction rate on cylinder expansion and the physical parameters of the detonation products. Based on the proposed quasi-isentropic hypothesis and relevant isentropic theories, the characteristic lines of aluminized explosives driving a cylinder were analyzed, and a quasi-isentropic model was established. This model includes the variation of the cylinder wall velocity and the physical parameters of the detonation products with the Al reaction degree. Using previously reported experimental results, the quasi-isentropic model was verified to be applicative and accurate. This model was used to calculate the physical parameters for cylinder experiments with aluminized cyclotrimethylenetrinitramine explosives with 15.0 % and 30.0 % Al content. The results show that this quasi-isentropic model can be used not only to calculate the cylinder expansion rule or Al reaction degree, but also to calculate the physical parameters of the detonation products in the process of cylinder expansion. For explosives with 15.0 % and 30.0 % Al, 24.3 % and 18.5 % of the Al was found to have reacted at 33.9 μs and 34.0 μs, respectively. The difference in Al content results in different reaction intensity, occurrence time, and duration of two forms of reaction (diffusion and kinetic) between the Al powder and the detonation products; the post-detonation burning reaction between the Al powder and the detonation products prolongs the positive pressure action time, resulting in a continuous rise in temperature after detonation.