指数寿命产品可靠性增长试验的Bayes分析

针对指数寿命产品的定时、定数截尾试验方案,推广了Mazzuchi-Soyer模型的应用范围。首先引入模型假设,以狄氏分布作为先验分布,综合利用产品研制的历史信息和专家信息,结合产品研制各阶段试验数据,给出了各阶段可靠性的联合后验分布。然后利用Gibbs抽样算法解决后验推断计算问题,得到各阶段产品可靠性的Bayes点估计和区间估计。最后给出产品可靠性增长分析实例,表明了模型的优越性。     

超重力下燃烧合成Al2O3-ZrO2（4Y）共晶陶瓷的自挤压工艺研究

引入自挤压工艺辅助超重力下燃烧合成制备Al2O3-ZrO2（4Y）共晶复合陶瓷,可有效地消除陶瓷制品的缩孔、缩松组织等缺陷,陶瓷致密性得到明显提高,同时又有效地抑制陶瓷裂纹萌生。XRD分析显示共晶陶瓷由α-Al2O3,t-ZrO2及少量的m-ZrO2三相组成,且随自挤压力增大,陶瓷中可相变的t-ZrO2的体积分数增加。SEM观察发现陶瓷的显微组织中的棒状共晶团随自挤压力的增大而细化,体积分数增加,且分布其上的t-ZrO2纤维直径变小,共晶团组织边缘处的ZrO2枝晶逐渐转变为细小的球晶,共晶团边界组织厚度逐渐减小,从而使陶瓷力学性能得以提升。     

驱动管中柱状装药爆轰过程的数值模拟

数值模拟了爆炸驱动管中柱状装药内爆轰波的传播过程.计算采用欧拉型有限体积方法,炸药及爆轰产物均采用JWL状态方程,空气采用理想气体状态方程,采用"点火-生长"模型计算化学反应速率.计算得到了驱动管内波系结构的发展过程,爆速与经验公式符合得较好.计算表明,驱动管侧壁的压力峰值在800MPa以上,而在管底中心处,由于激波的汇聚,压力峰值高达12.4GPa.     

零级Taylor级数的增长性

本文定义了单位圆内Taylor级数的型函数,得到了零级Taylor级数增长性方面的两个重要结论。     

Defense spending and economic growth: evidence from China, 1952–2012

This paper examines whether defense expenditures contributed to economic growth in China for the 1952–2012 period. We examine the contribution of defense to economic growth using recently published official data on economic activity, defense, and government expenditures. We employ the Feder-Ram and augmented Solow models of economic growth to explore the defense-growth relationship. The Feder-Ram model appears to poorly explain economic growth in China. The augmented Solow model suggests, however, that a 1% increase in defense expenditures raises the economic growth rate by approximately 0.15–0.19%.     

Shock initiation performance of NTO-based polymer bonded explosive

3-nitro-1,2,4-tri-azol-5-one (NTO) is a high energy insensitive explosive. To study the shock initiation process of NTO-based polymer bonded explosive JEOL-1 (32%octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX), 32% NTO, 28% Al and 8% binder system), the cylinder test, the gap experiments and numerical simulation were carried out. Firstly, we got the detonation velocity (7746 m/s) and the parameters of Jones-Wilkins-Lee (JWL) equation of state (EOS) for detonation product by cylinder test and numerical simulation. Secondly, the Hugoniot curve of unreacted explosive for JEOL-1 was obtained calculating the data of pressure and time at different Lagrangian positions. Then the JWL EOS of unreacted explosive was obtained by utilizing the Hugoniot curve as the reference curve. Finally, we got the pressure growth history of JEOL-1 under shock wave stimulation and the parameters of the ignition and growth reaction rate equation were obtained by the pressure-time curves measured by the shock-initiation gap experiment and numerical simulation. The determined trinomial ignition and growth model (IG model) parameters can be applied to subsequently simulation analysis and design of insensitive ammunition with NTO-based polymer bonded explosive.     

Effect of welding processes and consumables on fatigue crack growth behaviour of armour grade quenched and tempered steel joints

Quenched and Tempered (Q&T) steels are widely used in the construction of military vehicles due to its high strength to weight ratio and high hardness. These steels are prone to hydrogen induced cracking (HIC) in the heat affected zone (HAZ) after welding. The use of austenitic stainless steel (ASS) consumables to weld the above steel was the only available remedy because of higher solubility for hydrogen in austenitic phase. The use of stainless steel consumables for a non-stainless steel base metal is not economical. Hence, alternate consumables for welding Q&T steels and their vulnerability to HIC need to be explored. Recent studies proved that low hydrogen ferritic steel (LHF) consumables can be used to weld Q&T steels, which can give very low hydrogen levels in the weld deposits. The use of ASS and LHF consumables will lead to distinct microstructures in their respective welds. This microstructural heterogeneity will have a drastic influence in the fatigue crack growth resistance of armour grade Q&T steel welds. Hence, in this investigation an attempt has been made to study the influence of welding consumables and welding processes on fatigue crack growth behaviour of armour grade Q&T Steel joints. Shielded metal arc welding (SMAW) and Flux cored arc welding (FCAW) were used for fabrication of joints using ASS and LHF consumables. The joints fabricated by SMAW process using LHF consumable exhibited superior fatigue crack growth resistance than all other joints.     

Military expenditure,economic growth and structural instability: a case study of South Africa

This paper contributes to the growing literature on the milex-growth nexus, by providing a case study of South Africa and considering the possibility of structural breaks by applying newly developed econometric methods. Using full sample bootstrap Granger non-causality tests, no Granger causal link is found between military expenditure and GDP for 1951–2010, but parameter instability tests show the estimated VARs to be unstable. Using a bootstrap rolling window estimation procedure, however, finds evidence of bidirectional Granger causality in various subsamples. This implies standard Granger non-causality tests, which neither account for structural breaks nor time variation may be invalid.     

Does Military Spending Really Matter for Economic Growth in China and G7 Countries: The Roles of Dependency and Heterogeneity

This study revisits the causal linkages between military spending and economic growth in China and G7 countries (i.e. Canada, France, Germany, Italy, Japan, the UK, and the USA) by focusing country-specific analysis for the period 1988–2010. The panel causality analysis, which accounts for both cross-country dependency and heterogeneity across countries, is employed in this study. Our results find evidence of the neutrality hypothesis for Italy, France, and Germany, the military spending–growth detriment hypothesis for both Canada and the UK, and one-way Granger causality running from economic growth to military spending for China. Furthermore, we find a feedback between military spending and economic growth in both Japan and the USA. Thus, our results do not support that one size fits all.     

Military Spending and Economic Growth: The Case of Iran

Over the last decade, the Iranian Government budget on military has been higher than the average of the world. The current increasing international sanctions aim to reduce the military capabilities and capacities of the Iranian Government. We analyze the response of the Iranian economy to shocks in its military budget from 1959 to 2007, using impulse response functions and variance decomposition analysis. The Granger causality results show that there is unidirectional causality from the military spending growth rate to the economic growth rate. The response of income growth to increasing shocks in the military budget is positive and statistically significant.