矩形波导结构潘尼管工作特性的分析

本文导出了一般TE_(no)模矩形波导结构潘尼管的色散方程,对潘尼管作了更明确的解释,并详细计算了TE_(20)模潘尼管的色散方程,得到其基波和第三次谐波同步谐振的色散曲线。该曲线表明,潘尼管在基波谐振上有1.5%的增长率,而在第三次谐波上有0.8%的平均增长率。此外,用非线性理论分析基波和第三次谐波同步谐振时的工作情况,给出了电子饱和时的电子分布图。在常直流磁场下优化结果表明,潘尼管在其次谐振时有51%的高效率和QP_w=9949.9MW 的输出功率,而在第三次谐振时有11%的效率和QP_w=1741.8MW 的输出功率。     

Investigation on the foaming behaviors of NC-based gun propellants

To prepare the porous NC-based (nitrocellulose-based) gun propellants, the batch foaming process of using supercritical CO₂ as the physical blowing agent is used. The solubilities of CO₂ in the single-base propellants and TEGDN (trimethyleneglycol dinitrate) propellants are measured by the gravimetric method, and SEM (scanning electron microscope) is used to observe the morphology of foamed propellants. The result shows that a large amount of CO₂ could be dissolved in NC-based propellants. The experimental results also reveal that the energetic plasticizer TEGDN exerts an important influence on the pore structure. The triaxial tensile failure mechanism for solid-state nucleation is used to explain the nucleation of NC-based propellants in the solid state. Since some specific foaming behaviors of NC-based propellants can not be explained by the failure mechanism, a solid-state nucleation mechanism which revises the triaxial tensile failure mechanism is proposed and discussed.     

一种基于新技术复杂装备的可靠性增长方法

针对新技术复杂装备可靠性增长难的问题,利用可靠性增长理论,结合新技术复杂装备的特点,提出了一种适应于新技术复杂装备可靠性增长的方法。并将其应用于某型无人机系统的可靠性增长,通过2个生产周期达到了预期的可靠性增长目标值。这种方法具有良好的可操作性和经济性,可广泛应用于其他新技术复杂装备的可靠性增长中。     

浅析我国新阶段下的“三农”问题

三农(农民、农业、农村)在中国城市化、工业化、现代化过程中具有不可逾越的地位,有着不可低估的人口影响、空间影响、素质影响和政治影响。由于受经济、产业、制度的制约,出现了农民增长缓慢、农业发展动力不足、农村剩余劳动力过多等“三农”问题。新的国际、国内发展阶段又加剧了“三农”问题,使其成为影响我国经济持续健康发展的重要因素。“三农”问题的解决需要新的思路、新的方法和新的措施,这要求我们必须从以下几方面思考:大力发展小城镇,转移农村剩余劳动力;调整产业结构,提高农产品市场竞争力;大力发展教育,增加劳动力的人力资本存量;加大对“三农”的支持力度,创造良好的发展环境。     

高可靠性软件的极值统计分析

提出了极值统计分析的方法.对于失效数据极值分布函数的拟合检验,采用了相关系数法;对于母体分布的参数估计,则分别采用了最小二乘估计(LSE)和极大似然估计(MLE);最后通过一个实例说明了统计过程,并用模拟的方法证明了最小二乘估计较好.     

火箭发动机可靠性增长评估的Bayes方法

针对火箭发动机分阶段试验,每阶段试验后对发动机出现的故障分析、归零的情况,提出等效试验数据的概念,结合Bayes方法对系统的可靠性增长试验进行评估,并在此基础上给出可靠度的增长分析,最后给出实例进行说明。     

The interrelationship between defence spending,public expenditures and economic growth: evidence from China

This study examines the relationship between defence spending, other components of public spending and economic growth for the 1952–2012 period in China using Granger causality tests and generalised impulse response functions based on vector error correction models. The empirical results reveal two long-run equilibrium relationships among the variables and also show that defence spending inversely and unidirectionally Granger impacts economic growth. Furthermore, empirical findings point to a trade-off relationship between defence spending and public expenditures in China. From a policy maker’s perspective, the findings reported herein imply that a decrease in defence spending may stimulate economic growth.     

Military expenditure and economic growth in Middle Eastern countries and Turkey: a non-linear panel data approach

The economic growth effects of military expenditure have been the subject of a large literature in defence economics. Theories on the economic impacts of military expenditure greatly differ and include arguments that they either enhance economic growth or crowd out productive investments. Empirical literature on defence expenditure and economic growth nexus generally employs linear specifications to investigate the impact of defence expenditures on economic growth. Although it is now well established that many economic variables may have a non-linear data-generating mechanism, it seems that this reality has long been neglected in empirical work on defence–growth nexus. This paper attempts to fill this gap by employing non-linear panel data models to examine the effects of military expenditures on economic growth for Middle Eastern countries and Turkey, for the time period 1988–2012. Results show that the effect of military expenditure on economic growth is nonlinear such that the state of the economy actually determines the effect of the former on the latter. This is important not only in showing asymmetric relationship between these variables but also in revealing the reasons of mixed results of earlier literature.     

Testing or fault-finding for reliability growth: A missile destructive-test example

A new piece of equipment has been purchased in a lot of size m. Some of the items can be used in destructive testing before the item is put into use. Testing uncovers faults which can be removed from the remaining pieces of equipment in the lot. If t < m pieces of equipment are tested, then those that remain, m₁ = m − t, have reduced fault incidence and are more reliable than initially, but m₁ may be too small to be useful, or than is desirable. In this paper models are studied to address this question: given the lot size m, how to optimize by choice of t the effectiveness of the pieces of equipment remaining after the test. The models used are simplistic and illustrative; they can be straightforwardly improved. © 1997 John Wiley & Sons, Inc. Naval Research Logistics 44: 623–637, 1997     

Direct ink writing of 3D-Honeycombed CL-20 structures with low critical size

3D-Honeycombed CL-20 structures with low critical size of detonation have been fabricated successfully for intelligent weapon systems using a micro-flow direct ink writing (DIW) technology. The CL-20-based explosive ink for DIW technology was prepared by a two-component adhesive system with waterborne polyurethane (WPU) and ethyl cellulose (EC). Not only the preparation of the explosive ink but also the principle of DIW process have been investigated systematically. The explosive ink displayed strong shear-thinning behavior that permitted layer-by-layer deposition from a fine nozzle onto a substrate to produce complex shapes. The EC content was varied to alter the pore structure distribution and rheological behavior of ink samples after curing. The deposited explosive composite materials are of a honeycombed structure with high porosity, and the pore size distribution increases with the increase of EC content. No phase change was observed during the preparation process. Both WPU and EC show good compatibility with CL-20 particles. Apparently high activation energy was realized in the CL-20-based composite ink compared with that of the refined CL-20 due to the presence of non-energetic but stable WPU. The detonation performance of the composite materials can be precisely controlled by an adjustment in the content of binders. The 3D honeycombed CL-20 structures, which are fabricated by DIW technology, have a very small critical detonation size of less than 69 μm, as demonstrated by wedge shaped charge test. The ink can be used to create 3D structures with complex geometries not possible with traditional manufacturing techniques, which presents a bright future for the development of intelligent weapon systems.