Development of cost effective personnel armour through structural hybridization

The objective of the present study is to develop cost effective thermoplastic hybrid laminate using Dyneema® HB50 and Tensylon®HSBD 30A through structural hybridization method. Laminates having 20 mm thickness were fabricated and subjected to 7.62 × 39 mm mild steel core projectile with an impact velocity of 730 ± 10 ms⁻¹. Parameters such as energy absorption, back face deformation and rate of back face deformation were measured as a function of hybridization ratio. It was observed that hybrid laminate with 50:50 ratio (w/w) of Tensylon® and Dyneema® with Tensylon® as front face showed 200% more energy absorption when compared to 100% Tensylon® laminate and showed equal energy absorption as that of expensive 100% Dyneema® laminate. Moreover, hybrid laminate with TD50:50 ratio showed 40% lower in terms of final back face deformation than Dyneema® laminate. Rate of back face deformation was also found to be slow for hybrid laminate as compared to Dyneema® laminate. Dynamic mechanical analysis showed that, Tensylon® laminate has got higher stiffness and lower damping factor than Dyneema® and hybrid laminates. The interface between Tensylon® and Dyneema® layers was found to be separating during the penetration process due to the poor interfacial bonding. Failure behaviour of laminates for different hybridization ratios were studied by sectioning the impacted laminates. It was observed that, the Tensylon® laminate has undergone shear cutting of fibers as major failure mode whereas the hybrid laminate showed shear cutting followed by tensile stretching, fiber pull out and delamination. These inputs are highly useful for body armour applications to design cost effective armour with enhanced performance.     

Analysis of the stress wave and rarefaction wave produced by hypervelocity impact of sphere onto thin plate

Shock wave is emitted into the plate and sphere when a sphere hypervelocity impacts onto a thin plate. The fragmentation and phase change of the material caused by the propagation and unloading of shock wave could result in the formation of debris cloud eventually. Propagation models are deduced based on one-dimensional shock wave theory and the geometry of sphere, which uses elliptic equations (corresponding to ellipsoid equations in physical space) to describe the propagation of shock wave and the rarefaction wave. The “Effective thickness” is defined as the critical plate thickness that ensures the rarefaction wave overtake the shock wave at the back of the sphere. The “Effective thickness” is directly related to the form of the debris cloud. The relation of the “Effective thickness” and the “Optimum thickness” is also discussed. The impacts of Al spheres onto Al plates are simulated within SPH to verify the propagation models and associated theories. The results show that the wave fronts predicted by the propagation models are closer to the simulation result at higher impact velocity. The curvatures of the wave fronts decrease with the increase of impact velocities. The predicted “Effective thickness” is consistent with the simulation results. The analysis about the shock wave propagation and unloading in this paper can provide a new sight and inspiration for the quantitative study of hypervelocity impact and space debris protection.     

军事设施建设项目环境影响评价有关问题分析及建议

根据《中国人民解放军环境保护条例》,军事设施建设项目应进行环境影响评价。由于军事项目建设内容高度机密、国防需要迫切、建设时间紧迫等,再加上一些从事军事设施项目建设的管理人员对环境影响评价的理解还存在某些偏差,使许多军事设施建设项目未进行环境影响评价,影响了我军的环境保护工作。简要介绍了军事设施的范围及军事设施建设项目的环境影响评价概况,结合军事设施建设项目环境影响评价中出现的一些问题,提出了进行军事设施建设项目环境影响评价工作的几点建议。     

弹道导弹落点预报的雷达系统仿真

根据弹道理论建立了雷达探测弹道导弹的仿真模型 ,并对仿真的雷达探测跟踪弹道数据给出了处理方法 ,预报了导弹落点范围 ,并与理论落点进行了比较 ,给出落点精度。仿真结果表明 :雷达对导弹的探测数据经过一定数据处理 ,可得到预定的落点精度 ,说明该种仿真方法是可行的     

基于单元体设计的装甲装备弹目交会建模方法

为了提高作战仿真效果的可信度,提出了一种基于单元体的解决思路,并通过弹头终点弹道特性、装备几何特征、弹头与目标的关系分析,建立了陆军作战仿真的弹目交会模型。试验测试结果表明:该模型能够仿真作战过程中的弹头命中点坐标,满足作战仿真系统的准确性、实时性要求。     

点型火灾报警探测器保护范围对布置的影响

分析了点型火灾报警探测器＂保护半径＂与＂保护面积＂的内在关系,得出了以保护半径为主,保护面积及修正系数为辅新型计算方法,使其在不规则平面更有可操作性,能充分发挥探测器效能,给设置留下了宽裕的选择范围,使设置更趋合理;在安全性不受影响下,探测器用量最大可节省12%。     

基于单片机的远程光纤通信在点对点安全验证系统上的应用

现有的点对点安全验证系统都是基于电缆连接实现系统信息传输的。电缆传输信号存在传输衰减大、抗干扰能力差、在雷暴天气易发生事故等缺点。通过将基于单片机89C2051的远程光纤通信应用到现有设备来改进控制信号的传输模式,将电信号转换为光信号,在数据传输中使用传输同步码加密、数据包CRC校验、串行数据编码以及光纤连通性定时自动监测等技术,可以从物理信号传输到数据接收处理的整个过程中保证系统的安全性和可靠性;同时,通过光纤通信方案,也能节省系统构建和维护的经费。     

一类流行病动力学模型的稳定性研究

本文建立了一类流行病动力学的S-I-D-S模型,讨论了该模型的无病平衡点的全局稳定性及有病平衡点的局部稳定性。     

有限数量机载雷达目标覆盖价值算法

针对有限数量机载雷达目标覆盖价值问题,建立了机载雷达载机待选轨道中心点(COCP)概念;分析了COCP和目标点之间的关系,给出了有限数量机载雷达目标覆盖价值问题的数学模型。通过分析有限规模COCP集合的方法,建立了多个机载雷达部署约束条件的数学模型。通过对COCP集合和目标点集合进行约束排除和聚类,简化了研究问题。总结出了有限数量机载雷达目标覆盖价值数学模型的最优解和启发式次优解,实例仿真结果表明该模型和算法的有效性。     

一种面向多制式路径规划的网络模型

随着综合交通运输与导航应用技术的发展,综合利用多种交通方式实施路径规划的应用需求日益迫切,传统的单一制式路径规划系统与服务正在向多制式的方向发展.然而,传统的路径规划模型与算法难以直接应用在多制式的条件下.针对多制式路径规划的特点,构建合理的数据模型是解决该问题的基础.为此,提出了制式切换点的概念,并以此为基础建立了包含多制式图集合、顶点属性表和切换点矩阵三个主要部分的多制式网络模型,并在真实的城市道路网数据集上进行了多制式网络构建实验.该工作能够从理论和实践两个方面为多制式路径规划算法的设计提供基础性的技术支持.