一类参数激励与强迫激励并存的非线性振动系统的分叉

本文用Ｌｉａｐｕｎｏｖ—Ｓｃｈｍｉｄｔ方法研究了同时受参数激励与强迫激励作用的非线性振动系统的亚谐分叉问题,用奇异性理论确定了等价意义下的分叉方程的形式,导出了必需的分叉系数,求出并且分析了１／２—１／２亚谐共振分叉方程的普适开折,画出了各个结构稳定域及分叉集上的响应图。     

SiCf/Si-O-C复合材料的抗氧化、抗热震性能研究

通过研究材料的氧化前后质量的改变和强度减少及氧化前后微观结构的变化,研究了先驱体转化法制备的SiCf/Si-O-C复合材料的抗氧化、抗热震性能。结果表明SiCf/Si-O-C复合材料具有良好的抗氧化、抗热震性能。对所得材料微观结构进行了分析讨论,发现界面结构的变化是影响SiCf/Si-O-C复合材料抗氧化、抗热震性能的主要原因。     

Technical note: Worst‐case performance of power‐of‐two policies for serial inventory systems with incremental quantity discounts

This study presents power‐of‐two policies for a serial inventory system with constant demand rate and incremental quantity discounts at the most upstream stage. It is shown that an optimal solution is nested and follows a zero‐inventory ordering policy. To prove the effectiveness of power‐of‐two policies, a lower bound on the optimal cost is obtained. A policy that has a cost within 6% of the lower bound is developed for a fixed base planning period. For a variable base planning period, a 98% effective policy is provided. An extension is included for a system with price dependent holding costs. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

舰载火控系统的建模与仿真

探讨了建模与仿真技术在新型武器系统研制中的作用地位;介绍了WISE一体化建模／仿真开发环境及仿真软件,描述了新型舰载火控系统的建模与数字仿真方法,给出了采用分布交互式仿真(DIS)技术支持新型舰载火控系统进行效能评估的技术途径     

用CORBA技术构建分布对象应用系统

首先讨论了网络计算面临的问题和分布对象计算技术,然后详细讨论了分布对象计算标准——公共对象请求代理结构（ＣＯＲＢＡ）规范的体系和各个部分．最后,对基于ＣＯＲＢＡ的分布对象计算的优点及前景作了讨论．     

介子跃迁形状因子的重夸克极限和1/m_Q修正

在BS理论框架下,对0~-→0~-和0~-→1~-(0~-和1~-分别代表赝标介子和矢量介子)跃迁的形状因子进行模型无关的分析.结果表明BS框架既能给出重夸克极限下的自旋—味对称性,又能给出重夸克有效理论关于1/m_Q修正的Luke定理及其它关系.     

双机空战的仿真与分析

用矩阵博弈理论、计算机仿真的方法研究了空战过程,使双机的空中格斗阶段─目标的跟踪、射击、弹道计算及射击效果的评定连续化,并用ＦＯＲＴＲＡＮ─７７语言编程在计算机上进行了Ｆ＿Ａ、Ｆ＿Ｂ两种飞行的空战,仿真结果与实际情况基本一致。本程序具有通用性,可对不同种类的飞机及武器系统的性能作出定性和定量的分析和评估。     

分布式操作系统MTA－OS的设计研究

介绍了一个用于空－空多目标攻击数字仿真的分布式操作系统ＭＴＡ－ＯＳ的设计思想、系统结构、组成及主要功能。     

聚钛碳硅烷的新合成法及其研究

从聚硅烷(PS)与钛酸丁酯。(Ti(OBu)_4)出发,不采用任何反应促进剂直接合成了含钛碳化硅纤维的先驱体聚钛碳硅烷(PTC)。在这一反应中,PS 首先裂解成含Si—C 骨架与Si—H 键的低分子聚硅烷(LPS)。然后,由LPS 中的Si—H 键与Ti(OBu)_4的反应以及LPS 的Si—Si 骨架裂解转化为Si—C 骨架的反应制得了PTC.本文对这种新合成法所涉及的反应过程进行了研究,并比较了新旧两法得到的PTC—1与PTC—Ⅱ的结构异同,报告了以新法制得的PTC—Ⅱ为先驱体得到的含钛碳化硅纤维的优良性能。     

Probabilistic analysis of an asymptotically optimal solution for the completion time variance problem

Scheduling a set of n jobs on a single machine so as to minimize the completion time variance is a well‐known NP‐hard problem. In this paper, we propose a sequence, which can be constructed in O(n log n) time, as a solution for the problem. Our primary concern is to establish the asymptotical optimality of the sequence within the framework of probabilistic analysis. Our main result is that, when the processing times are randomly and independently drawn from the same uniform distribution, the sequence is asymptotically optimal in the sense that its relative error converges to zero in probability as n increases. Other theoretical results are also derived, including: (i) When the processing times follow a symmetric structure, the problem has 2^{⌊(n−1)/2⌋} optimal sequences, which include our proposed sequence and other heuristic sequences suggested in the literature; and (ii) when these 2^{⌊(n−1)/2⌋} sequences are used as approximate solutions for a general problem, our proposed sequence yields the best approximation (in an average sense) while another sequence, which is commonly believed to be a good approximation in the literature, is interestingly the worst. © 1999 John Wiley & Sons, Inc. Naval Research Logistics 46: 373–398, 1999