Deconsolidation and combustion performance of thermally consolidated propellants deterred by multi-layers coating

Both heating and solvent-spray methods are used to consolidate the standard grains of double-base oblate sphere propellants plasticized with triethyleneglycol dinitrate (TEGDN) (TEGDN propellants) to high density propellants. The obtained consolidated propellants are deterred and coated with the slow burning multi-layer coating. The maximum compaction density of deterred and coated consolidated propellants can reach up to 1.39 g/cm³. Their mechanic, deconsolidation and combustion performances are tested by the materials test machine, interrupted burning set-up and closed vessel, respectively. The static compression strength of consolidated propellants deterred by multi-layer coating increases significantly to 18 MPa, indicating that they can be applied in most circumstances of charge service. And the samples are easy to deconsolidate in the interrupted burning test. Furthermore, the closed bomb burning curves of the samples indicate a two-stage combustion phenomenon under the condition of certain thickness of coated multi-layers. After the outer deterred multi-layer coating of consolidated samples is finished burning, the inner consolidated propellants continue to burn and breakup into aggregates and grains. The high burning progressivity can be carefully obtained by the smart control of deconsolidation process and duration of consolidated propellants. The preliminary results of consolidated propellants show that a rapid deconsolidation process at higher deconsolidation pressure is presented in the dynamic vivacity curves of closed bomb test. Higher density and higher macro progressivity of consolidated propellants can be obtained by the techniques in this paper.     

Theoretical study of an energetic material di-1H-1,3,4-triazole derivatives

Computations by density functional theory (DFT) method are performed on a series of di-1H-1,3,4-triazole derivatives with different substituents and linkages. The heat of formation (HOF) is predicted by the designed isodesmic reactions. The predicted results reveal that –N₃ and –NN– groups are effective structural units for increasing the HOF values of the di-1H-1,3,4-triazole derivatives. The HOMO–LUMO gap is affected by the substituents and linkage groups. Detonation performance is evaluated using the Kamlet–Jacobs approach based on the calculated density and HOF. The results indicate that –NO₂, –NF₂, –NH–, –NH–NH– and –NN– groups are helpful for enhancing the detonation properties of di-1H-1,3,4-triazole derivatives. The bond dissociation energy and bond order of the weakest bonds are analyzed to investigate their stability. It is observed that the –CH₂–, –CH₂–CH₂– and –CHCH– groups are effective structural units for improving the stabilities of these derivatives. Considering the detonation performance and the stability, five compounds are screened as the potential candidates for high energy density materials.     

Biased retro-proportional navigation law for interception of high-speed targets with angular constraint

A new guidance law, called biased retro proportional navigation (BRPN), is proposed. The guidance law is designed to intercept high-speed targets with angular constraint, which can be used for ballistic target interception. BRPN guidance law is defined, and the exact time-varying bias for a required impact angle is derived. Furthermore, the simulation results (trajectory, variation of navigation ratio, capture region, etc) are compared with those of biased proportional navigation (BPN), proportional navigation and retro-proportional navigation. The results show that, at the cost of a higher intercept time, BRPN demands lower terminal lateral acceleration and has larger capture region compared to BPN.     

基于数据场的登陆作战体系兵力编组效能分析?

兵力编组效能直接影响登陆作战体系的作战能力。在分析梯队式和群队式兵力编组模式下登陆作战体系网络模型的基础上,利用数据场理论研究登陆作战体系的拓扑势场,描述梯队或群队间由支援、协同产生的协同作战能力,建立基于数据场的登陆作战体系兵力编组效能模型,并进行仿真分析。得到了一种定量分析兵力编组作战效能的方法。     

自由曲面的立体视觉测量与加工一体化研究

对自由曲面的立体现觉测量与加工一体化技术中的图像匹配、曲面造型以及接口设计等问题进行了分析与讨论,并提出了切实可行的解决办法。     

多尺度PCA-HOG遥感异源图像匹配算法

针对遥感异源图像匹配中非线性灰度畸变和强噪声干扰问题,提出一种基于主成分分析(Principal Components Analysis,PCA)和方向梯度直方图(Histogram of Oriented Gradients,HOG)的遥感异源图像匹配算法.该算法利用HOG提取图像间的几何结构共性特征,能有效克服异源...     

雷达虚拟维修训练中交互系统的通用性

基于USB接口技术对"通用雷达装备虚拟维修训练系统(URVMTS)"的人机交互系统进行研究,通过合理的软、硬件设计实现了系统的通用性。不同的实装操作部件经过适当的信号调理均可以通过该系统方便地实现与雷达虚拟样机之间的交互。着重介绍了交互系统的通用性设计与实现方法,包括系统的通用性设计方案,USB硬件电路的通用性设计及相应的软件开发。     

DIS的多武器模拟器训练系统

现有的武器系统模拟器大多是对单个武器系统平台的性能仿真,利用DIS可以将它们联结成多武器平台的作战环境下的对抗仿真。在分析基于DIS的多武器系统模拟器训练系统的基础上,确定了系统的仿真框架,介绍了系统中通信的实现方法,并介绍了系统的工作过程。     

多武器系统的火力分配模型

目前对于单一兵器火力分配问题的解决方法比较成熟,然而由于在现代防空作战中,经常是多种类型的兵器联合进行防空,故需要对多种不同类型的兵器的火力分配问题进行探讨。这里针对多种不同类型的兵器毁伤多个目标的问题,建立了数学模型,进行了深入的探讨。按照模型的特殊性,定义了映射、邻域和连通的概念;同时针对模型,将遗传模拟退火算法进行了一定的修改,并利用此算法对模型进行了最优化求解。最后,实例的计算结果表明该算法对于模型的求解具有较好的收敛性。     

无人作战飞机通信延时仿真

通信作为无人作战飞机任务控制站与无人作战飞机之间的纽带,在无人作战飞机系统中起着至关重要的作用。简要阐述了引起无人作战飞机通信延时的具体因素,分析了无人作战飞机使用的几种通信方式,提出并运用网络仿真工具NS2(networksimulation-2)针对视线通信方式和不同中继方式下的通信延时进行了仿真,最后对仿真作了分析和解释。