横向运动板干扰聚能射流的数值模拟

基于有限元分析软件ANSYS/LS-DYNA和LS-PREPOST,用ALE算法对射流垂直侵彻横向运动防护板的过程进行模拟分析。防护板在不同速度下干扰射流时,对防护板和后效板上的开坑形状进行分析,并计算后效板上的最终侵深及射流轴线上的速度降,得到射流在横向防护板作用下后效板侵深及射流轴线上的速度降随防护板速度变化的曲线。结果表明,防护板抗射流侵彻能力随防护板速度的增加而增强,尤其是防护板横向速度在0～100m/s增加时,抗射流侵彻能力增强较为明显。     

Theoretical and numerical simulation study on jet formation and penetration of different liner structures driven by electromagnetic pressure

The use of a shaped liner driven by electromagnetic force is a new means of forming jets. To study the mechanism of jet formation driven by electromagnetic force, we considered the current skin effect and the characteristics of electromagnetic loading and established a coupling model of"Electric—Magnetic—Force"and the theoretical model of jet formation under electromagnetic force. The jet formation and penetration of conical and trumpet liners have been calculated. Then, a numerical simulation of liner collapse under electromagnetic force, jet generation, and the stretching motion were performed using an ANSYS multiphysics processor. The calculated jet velocity, jet shape, and depth of penetration were consistent with the experimental results, with a relative error of less than 10％. In addition, we calculated the jet formation of different curvature trumpet liners driven by the same loading condition and ob-tained the influence rule of the curvature of the liner on jet formation. Results show that the theoretical model and the ANSYS multiphysics numerical method can effectively calculate the jet formation of liners driven by electromagnetic force, and in a certain range, the greater the curvature of the liner is, the greater the jet velocity is.     

Study on energy release characteristics of reactive material casings under explosive loading

Reactive Materials (RMs), a new material with structural and energy release characteristics under shock-induced chemical reactions, are promising in extensive applications in national defense and military fields. They can increase the lethality of warheads due to their dual functionality. This paper focuses on the energy release characteristics of RM casings prepared by alloy melting and casting process under explosive loading. Explosion experiments of RM and conventional 2A12 aluminum alloy casings were conducted in free field to capture the explosive fireballs, temperature distribution, peak overpressure of the air shock wave and the fracture morphology of fragments of reactive material (RM) warhead casings by using high-speed camera, infrared thermal imager temperature and peak overpressure testing and scanning electron microscope. Results showed that an increase of both the fireball temperature and air shock wave were observed in all RM casings compared to conventional 2A12 aluminum ally casings. The RM casings can improve the peak overpressure of the air shock wave under explosion loading, though the results are different with different charge ratios. According to the energy release characteristics of the RM, increasing the thickness of RM casings will increase the peak overpressure of the near-field air shock wave, while reducing the thickness will increase the peak overpressure of the far-field air shock wave.     

Chain damage effects of multi-spaced plates by reactive jet impact

Chain damage is a new phenomenon that occurs when a reactive jet impacts and penetrates multi-spaced plates.The reactive jet produces mechanical perforations on the spaced plates by its kinetic energy(KE),and then results in unusual chain rupturing effects and excessive structural damage on the spaced plates by its deflagration reaction.In the present study,the chain damage behavior is initially demonstrated by experiments.The reactive liners,composed of 26 wt％Al and 74 wt％PTFE,are fabricated through a pressing and sintering process.Three reactive liner thicknesses of 0.08 CD,0.10 CD and 0.12 CD(charge diameter)are chosen to carry out the chain damage experiments.The results show a chain rupturing phenomenon caused by reactive jet.The constant reaction delay time and the different penetration velocities of reactive jets from liners with different thicknesses result in the variation of the deflagration position,which consequently determines the number of ruptured plates behind the armor.Then,the finite-element code AUTODYN-3D has been used to simulate the kinetic energy only-induced rupturing effects on plates,based on the mechanism of behind armor debris(BAD).The significant discrepancies between simulations and experiments indicate that one enhanced damage mechanism,the behind armor blast(BAB),has acted on the ruptured plates.Finally,a theoretical model is used to consider the BAB-induced enhancement,and the analysis shows that the rupturing area on aluminum plates depends strongly upon the KE only-induced pre-perforations,the mass of reactive materials,and the thickness of plates.     

Investigate the effects of magnetic fields on the penetration ability of a shaped charge jet at different standoffs

The influence of a magnetic field on the stability of a shaped charge jet is experimentally investigated at standoffs of 490, 650 and 800 mm. The experimental results without and with the magnetic field are compared in terms of the shaped charge jet form, stability and penetration ability. A theoretical model based on one-dimension fluid dynamics is then developed to assess the depth of penetration of the shaped charge at those three standoffs and magnetic conditions. The results show that the penetration capability can be enhanced in more than 70% by the magnetic field. The theoretical calculations are compared with the experimental results with reasonably good correlation. In addition, the parameters introduced in the theory are discussed together with the experiments at three standoffs studied.     

Analysis on damage characteristics and detonation performance of solid rocket engine charge subjected to jet

To further explore the damage characteristics and impact response of the shaped charge to the solid rocket engine (SRE) in storage or transportation, protective armor was designed and the shelled charges model (SCM)/SRE with protective armor impacting by shaped charge tests were conducted. Air overpressures at 5 locations and axial acceleration caused by the explosion were measured, and the experimental results were compared with two air overpressure curves of propellant detonation obtained by related scholars. Afterwards, the finite element software AUTODYN was used to simulate the SCM impacted process and SRE detonation results. The penetration process and the formation cause of damage were analyzed. The detonation performance of TNT, reference propellant, and the propellant used in this experiment was compared. The axial acceleration caused by the explosion was also analyzed. By comprehensive comparison, the energy released by the detonation of this propellant is larger, and the HMX or Al particles contained in this propellant are more than the reference propellant, with a TNT equivalent of 1.168–1.196. Finally, advanced protection armor suggestions were proposed based on the theory of woven fabric rubber composite armor (WFRCA).     

超燃冲压发动机燃烧室燃料喷注及其内流场的数值模拟

基于三维N-S方程,利用有限差分数值离散方法,对考虑了燃料喷注和凹腔结构综合影响的某超燃冲压发动机燃烧室模型的内流场进行了数值模拟,与实验流动图谱进行了定性比较,并进一步探讨了燃料喷注过程的非定常特性以及凹腔结构对流动的影响。研究表明:本文数值模拟的稳态时刻流场与实验流动图谱相似;数值结果捕捉到了横向喷注燃料沿下游运动并向凹腔扩散的非定常动态变化的规律。     

Shaped charge penetration into high- and ultrahigh-strength Steel–Fiber reactive powder concrete targets

Experiments on shaped charge penetration into high and ultrahigh strength steel-fiber reactive powder concrete (RPC) targets were performed in this paper. Results show that the variation of penetration depth and crater diameter with concrete strength is different from that of shaped charge penetration into normal strength concrete (NSC). The crater diameter of RPC is smaller than that of NSC penetrated by the shaped charge. The jet particles are strongly disturbed and hardly reach the crater bottom because they pass through the narrow channel formed by jet penetration into the RPC. The effects of radial drift velocity and gap effects of jet particles for a shaped charge penetration into RPC target are discussed. Moreover, a theoretical model is presented to describe the penetration of shaped charge into RPC target. As the concrete strength increases, the penetration resistance increases and the entrance crater diameter decreases. Given the drift velocity and narrow crater channel, the low-velocity jet particles can hardly reach the crater bottom to increase the penetration depth. Moreover, the narrow channel has a stronger interference to the jet particles with increasing concrete strength; hence, the gap effects must be considered. The drift velocity and gap effects, which are the same as penetration resistance, also have significant effects during the process of shaped charge penetration into ultrahigh-strength concrete. The crater profiles are calculated through a theoretical model, and the results are in good agreement with the experiments.     

合成射流影响因素

在综合国外大量实验和数值模拟数据的基础上 ,对影响合成射流特性的驱动因素、结构因素进行了分析和总结 ,并且通过数值模拟的方法对雷诺数以及斯托罗哈数对合成射流的影响进行了研究。获得了反映合成射流激励器特征的函数关系式 ,为激励器的初步设计提供指导     

活性粉末混凝土200(RPC200)的配制试验研究

进行了活性粉末混凝土(RPC)的配制试验,通过5批试件分别探讨砂灰比、石英粉、硅灰、水胶比和钢纤维等因素单值变化时对RPC流动度以及抗折强度、抗压强度的影响.研究表明:在常规制作工艺条件下,配制出抗压强度和抗折强度分别为145.6 MPa和26.68MPa的无纤维RPC;当钢纤维含量为6%时,RPC的抗压强度和抗折强度分别达到了201.3MPa和73.67 MPa.