基于以太环网的舰载网络设计技术

在对国外舰载网络发展分析后,结合舰载网络发展的军事需求,提出了基于以太网环网构建舰载高可靠网络的发展思路,并探讨了基于以太环网的舰载网络的体系结构、舰载多业务接入等相关技术。最后,利用三台万兆交换机搭建了单环网络测试环境,测试结果表明,以太环网的保护及恢复时间满足舰载网络的可靠性要求,基于以太环网的舰载网络设计方案可行。     

Formation of adiabatic shearing band for high-strength Ti-5553 alloy: A dramatic thermoplastic microstructural evolution

By using split Hopkinson pressure bar, optical microscopy and electronic microscopy, we investigate the influence of initial microstructures on the adiabatic shear behavior of high-strength Ti–5Al–5V–5Mo–3Cr (Ti-5553) alloy with lamellar microstructure and bimodal microstructure. Lamellar alloy tends to form adiabatic shearing band (ASB) at low compression strain, while bimodal alloy is considerably ASB-resistant. Comparing with the initial microstructure of Ti-5553 alloy, we find that the microstructure of the ASB changes dramatically. Adiabatic shear of lamellar Ti-5553 alloy not only results in the formation of recrystallized β nano-grains within the ASB, but also leads to the chemical redistribution of the alloying elements such as Al, V, Cr and Mo. As a result, the alloying elements distribute evenly in the ASB. In contrast, the dramatic adiabatic shear of bimodal alloy might give rise to the complete lamination of the globular primary α grain and the equiaxial prior β grain, which is accompanied by the dynamic recrystallization of α lamellae and β lamellae. As a result, ASB of bimodal alloy is composed of α/β nano-multilayers. Chemical redistribution does not occur in ASB of bimodal alloy. Bimodal Ti-5553 alloy should be a promising candidate for high performance armors with high mass efficiency due to the processes high dynamic flow stress and excellent ASB-resistance.     

Deconsolidation and combustion performance of thermally consolidated propellants deterred by multi-layers coating

Both heating and solvent-spray methods are used to consolidate the standard grains of double-base oblate sphere propellants plasticized with triethyleneglycol dinitrate (TEGDN) (TEGDN propellants) to high density propellants. The obtained consolidated propellants are deterred and coated with the slow burning multi-layer coating. The maximum compaction density of deterred and coated consolidated propellants can reach up to 1.39 g/cm³. Their mechanic, deconsolidation and combustion performances are tested by the materials test machine, interrupted burning set-up and closed vessel, respectively. The static compression strength of consolidated propellants deterred by multi-layer coating increases significantly to 18 MPa, indicating that they can be applied in most circumstances of charge service. And the samples are easy to deconsolidate in the interrupted burning test. Furthermore, the closed bomb burning curves of the samples indicate a two-stage combustion phenomenon under the condition of certain thickness of coated multi-layers. After the outer deterred multi-layer coating of consolidated samples is finished burning, the inner consolidated propellants continue to burn and breakup into aggregates and grains. The high burning progressivity can be carefully obtained by the smart control of deconsolidation process and duration of consolidated propellants. The preliminary results of consolidated propellants show that a rapid deconsolidation process at higher deconsolidation pressure is presented in the dynamic vivacity curves of closed bomb test. Higher density and higher macro progressivity of consolidated propellants can be obtained by the techniques in this paper.     

基于LOG算子的激光雷达图象边缘检测算法改进

针对LOG算子的不足之处,提出了一种激光雷达图像的边缘检测改进LOG算子算法:用二维自适应Wiener滤波代替Gaussian滤波。仿真结果表明:对于含有高斯噪声和乘性噪声的激光雷达图像,该算法能够有效提高LOG算子的边缘检测能力。     

用于闭式循环柴油机不依赖空气推进装置的吸收器尺寸估算模型研究

根据闭式循环柴油机推进装置（ＣＣＤＡＩＰ）的废气处理要求,研究提出了旋转式二氧化碳吸收器的填料内径、外径、轴向高度的估算数学模型,并对用水吸收二氧化碳的吸收器填料设计尺寸进行了操作安全性校核．     

54／74HC高速CMOS逻辑电路的接口电路

本文主要讨论了５４／７４ＨＣ高速ＣＭＯＳ逻辑电路的性能特．点及接口电路。     

KD-RTI/DDM中的组播分配策略

组播技术的应用可以有效提高RTI的实现性能。介绍了组播分配的一般理论和实现方案,详细展示了KD RTI中的组播分配策略,讨论了组播应用过程中出现的问题,同时给出了解决方法。     

利用RLC电路合成高压方波脉冲

基于过阻尼RLC电路分时放电,提出了一种新型高压方波脉冲产生方法。理论分析表明过阻尼RLC电路产生的双指数电压波与PFL产生的方形电压波具有类似的上升沿和平顶。电路模拟表明通过人工过零技术可以对双指数电压波进行截尾,从而形成完整的高压方波脉冲。建立了原理验证性样机,由两组RLC电路构成,每组电路包含一台400 nF脉冲电容器和一只三电极场畸变气体开关,两组电路共用一个上升沿调节电感。实验证明样机可以在250 Ω电阻负载上输出幅值17 kV,平顶宽度330 ns~5.8 μs,上升沿100~ 350 ns 的单极性高压方波脉冲。该方法适应性强,对负载变化不敏感,同时具有良好的可调节性,方波上升沿、平顶宽度连续独立可调。     

战区导弹防御系统(TMD)对抗技术浅析

探讨了战区导弹防御系统(TMD)对抗技术的初步设想与实现方法,重点对TMD系统激光对抗技术和TMD系统红外对抗技术进行了可行性分析论证,介绍了一些具体的光电对抗措施。     

基于HLA分布式仿真的Web服务化

HLA虽然能够简化各类仿真系统的互操作和重用,但是接口规范与编程语言的绑定、缺乏与商业技术的融合等阻碍了它在商业领域的广泛应用,Web服务具有平台和厂商独立等良好特性,实现基于HLA分布式仿真的Web服务化能够将Web服务的优势附加给HLA.该文在分析了HLA不足和web服务优势的基础上,提出了HLA Web服务化,对比了互操作在两个上下文中的差异,分析了实现HLA Web服务化的三个层次;之后,概述了相关研究,重点讨论了实现Web使能RTI的关键技术问题及其解决方案;最后,设计了原型系统,测试结果显示原型系统能够初步实现RTI的Web服务化.