航天测控通信系统可靠性分析的Krylov子空间投影算法

基于Markov模型对航天测控通信系统进行可靠性分析的过程中,若系统中测控通信设备数量较多,模型中的状态空间随设备数量呈指数增长,将会导致数值计算困难.提出了一种基于Krylov子空间技术的可靠性分析方法,将大规模问题投影至小规模子空间中,求得问题的近似解.实验结果证明,Krylov子空间方法的计算速度及精度优于Ross方法和前向Euler法(forward Euler method,FEM).     

神经网络和DEA方法的炮兵火力毁伤先验评估模型

提出运用BP神经网络理论和数据包络分析(DEA)方法,对炮兵火力毁伤先验评估问题进行研究。利用以往经验数据建立样本集,通过BP神经网络预测模型,对待评估的炮兵火力毁伤计划进行分析,预测其毁伤效益,再建立带有偏好锥结构的DEA评估模型,分析火力计划的可行性和合理性;最后以某部17组炮兵火力毁伤数据进行实例分析。结果表明,该模型能给出科学、明确、可靠的先验评估结果。     

基于灰色系统理论的目标方位估算及应用

针对潜艇作战过程中依据目标方位变化判断战场态势的军事需求,根据灰色系统理论,以实测目标方位序列为原始数据,建立GM(1,1)模型,深入挖掘其内在规律性,对目标方位序列的变化趋势进行科学分析,并估算未来时刻目标方位,用于战术态势判断、检验目标运动要素解算和战术绘算的准确性,以及干预目标运动要素解算,以期望利用有限的数据,获得最大限度的信息,为潜艇指挥员提供决策支持。     

飞机机翼结构损伤仿真研究

飞机结构的战伤模式及战伤程度预测对于制定战场抢修预案及改进战斗生存力设计具有重要意义。采用计算机模拟仿真技术定量分析了飞机机翼结构遭受射弹攻击后的损伤情况。通过损伤仿真讨论了3类情形,一是机翼结构受到简单的侵彻后的冲击效应;二是高速射弹攻击带有翼盒的机翼,而产生流体动力冲压效应;三是在射弹冲击模型中增加爆炸条件,研究射弹以任意角度冲击不同的位置产生的耦合效应。基于AN SY S/LS-DYNA仿真,给出了机翼结构损伤的结果,结论为战伤飞机战场抢修的快速评估提供了科学依据,也为飞机平时修理提供了参考。     

用于SiC光学材料高效加工的电弧增强等离子体加工方法*

由于SiC光学材料具有高化学稳定性,使其在普通的等离子体加工中难以获得较高的加工效率。在等离子体加工实验中,我们发现提高等离子体的自身射频电压,可增强等离子体与SiC材料之间的电弧放电作用,而借助电弧的增强作用提高SiC材料的加工效率,因此本文提出了电弧增强等离子体加工方法。为研究电弧的形成原理,本文使用自制的探针分别测量了普通电感耦合等离子体和电弧增强等离子体的电压。并分别使用传统方法和电弧增强方法对S-SiC进行直线扫描加工实验,证明了电弧增强等离子加工方法在加工过程中具有更高的加工效率。     

双DSP技术在无线分组网络路由控制器中的应用

介绍了双DSP技术在无线分组网络路由控制器中的应用,阐述了双DSP间通信方案的选择及双DSP系统的实现,提出了一种双DSP对多个串行通信控制器(SCC)的设计方案,并给出了具体的硬件、软件设计方法.     

基于峰值点形态信息的SAR图像舰船尾迹检测算法

在分析合成孔径雷达(SAR)图像中舰船尾迹线性特性的基础上,针对SAR图像线性特征产生因素的多样性,及由此引起的Radon变换域中尾迹峰值点检测的不确定性,提出了一种基于峰值点形态信息的尾迹检测算法。算法门限化图像的Radon变换系数,提取出所有可能的峰值点;对这些相应的局部峰值点的一维截面进行连续小波变换峰值点匹配,根据提取到的参数形成决策矢量在特征空间中进行决策。仿真和实际数据处理的结果表明,该方法能有效、准确地检测到SAR图像中的舰船尾迹并判决其真假类别。     

Effectiveness of (R,Q) policies in one‐warehouse multiretailer systems with deterministic demand and backlogging

Consider a distribution system with a central warehouse and multiple retailers. Customer demand arrives at each of the retailers continuously at a constant rate. The retailers replenish their inventories from the warehouse which in turn orders from an outside supplier with unlimited stock. There are economies of scale in replenishing the inventories at both the warehouse and the retail level. Stockouts at the retailers are backlogged. The system incurs holding and backorder costs. The objective is to minimize the long‐run average total cost in the system. This paper studies the cost effectiveness of (R, Q) policies in the above system. Under an (R, Q) policy, each facility orders a fixed quantity Q from its supplier every time its inventory position reaches a reorder point R. It is shown that (R, Q) policies are at least 76% effective. Numerical examples are provided to further illustrate the cost effectiveness of (R, Q) policies. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 422–439, 2000     

Optimal policies for M/M/m queue with two different kinds of (N,T)‐policies

In this paper, two different kinds of (N, T)‐policies for an M/M/m queueing system are studied. The system operates only intermittently and is shut down when no customers are present any more. A fixed setup cost of K > 0 is incurred each time the system is reopened. Also, a holding cost of h > 0 per unit time is incurred for each customer present. The two (N, T)‐policies studied for this queueing system with cost structures are as follows: (1) The system is reactivated as soon as N customers are present or the waiting time of the leading customer reaches a predefined time T, and (2) the system is reactivated as soon as N customers are present or the time units after the end of the last busy period reaches a predefined time T. The equations satisfied by the optimal policy (N*, T*) for minimizing the long‐run average cost per unit time in both cases are obtained. Particularly, we obtain the explicit optimal joint policy (N*, T*) and optimal objective value for the case of a single server, the explicit optimal policy N* and optimal objective value for the case of multiple servers when only predefined customers number N is measured, and the explicit optimal policy T* and optimal objective value for the case of multiple servers when only predefined time units T is measured, respectively. These results partly extend (1) the classic N or T policy to a more practical (N, T)‐policy and (2) the conclusions obtained for single server system to a system consisting of m (m ≥ 1) servers. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 240–258, 2000     

战区导弹防御(TMD)拦截器固体轨控发动机技术

叙述了固体轨控推进技术的突破———具有EXCELS(大气层内、大气层外、可控、可熄灭、质量轻、固态 )的轨、姿控系统 (DACS) ,为战区导弹防御提供了更大的机动性。试验证明这种DACS安全可靠、成本最低。