基于物元模型-AHP的联合电子防空作战效能评估

针对现代防空作战训练中联合电子防空作战效能评估的问题,引入物元模型,并结合层次分析法(AHP)提出了基于物元模型-AHP的联合电子防空作战效能评估方法.以某次复杂电磁环境下联合电子防空演习任务为背景,建立了作战效能评估指标体系和评估模型,给出了评估模型的仿真算例,结果表明,该方法在联合电子防空作战的效能评估中是可行和有...     

地空反辐射导弹武器系统作战效能影响评估模型

地空反辐射导弹武器系统融入战术防空体系对防空作战效能的影响如何定量评估是作战运用研究的重要问题。采用阶段概率分析法建立了打击空袭方预警机、电子干扰机对防空作战效能和我方航空兵突击作战效能影响评估模型,通过计算可得出定量数据供作战研究参考。实例计算结果表明地空反辐射导弹武器系统将能极大地提高防空导弹体系作战效能,对于获取防对抗中的信息优势将发挥举足轻重的作用,对地面防空由被动防御向攻防兼备转型将其有重大意义。     

SpaceFibre网络服务质量时隙资源分配算法

为保证SpaceFibre星载数据网络大量实时数据流的超高速确定性传输,提出一种包含两个子算法的SpaceFibre网络服务质量时隙资源分配算法。形式化描述网络服务质量机制,给出调度矩阵相关定义;创建网络服务质量排队模型,定量分析时隙资源分配对网络时延性能的影响;考虑网络兼容性和算法鲁棒性,给出改进二进制序列调度子算法;采用提高初始种群进化程度和增加遗传算子等方法,给出改进混合单亲遗传调度子算法;利用Opnet网络仿真平台建立网络服务质量仿真模型,对比不同算法下网络时延性能。仿真结果表明,该时隙资源分配算法与其他算法相比,网络平均延时降低,网络性能得到显著改善,对构建低延时SpaceFibre网络具有参考意义。     

动初级高速六相直线感应电机工作特性分析

为了准确刻画对象模型,采用一阶等效电路瞬态涡流分析法对动态边端效应影响下动初级高速六相直线感应电机的参数时变规律进行了定量计算,并通过感应涡流损耗推导得到考虑动态边端效应时电机的等效电路。基于此,通过电磁推力计算及效率评估对动态边端效应影响下电机的工作特性进行了详细分析。利用不同运行速度条件下的有限元仿真及动态实验验证了理论分析和推导的正确性。     

考虑腐蚀因素的船体结构寿命预测方法

为建立考虑腐蚀因素的船体结构寿命预测方法,在分析现有常用的船体结构腐蚀损伤时变模型的基础上,根据舰船维修保障实际情况建立了考虑腐蚀防护系统作用时间和维修时间等因素的腐蚀时变模型。根据相关规范选择了船体结构腐蚀寿命标准,并建立了一种计算船体结构腐蚀寿命的方法。该方法建立了船体结构腐蚀寿命与腐蚀防护系统作用时间和修理时间等因素之间的量化关系,可以用于预测均匀腐蚀条件下船体结构寿命,也可以反过来指导腐蚀防护系统设计指标的选择和船体结构维修策略的确定。     

Multi-objectives nonlinear structure optimization for actuator in trajectory correction fuze subject to high impact loadings

This paper presents an actuator used for the trajectory correction fuze, which is subject to high impact loadings during launch. A simulation method is carried out to obtain the peak-peak stress value of each component, from which the ball bearings are possible failures according to the results. Subsequently, three schemes against impact loadings, full-element deep groove ball bearing and integrated raceway, needle roller thrust bearing assembly, and gaskets are utilized for redesigning the actuator to effectively reduce the bearings' stress. However, multi-objectives optimization still needs to be conducted for the gaskets to decrease the stress value further to the yield stress. Four gasket's structure parameters and three bearings' peak-peak stress are served as the four optimization variables and three objectives, respectively. Optimized Latin hypercube design is used for generating sample points, and Kriging model selected according to estimation result can establish the relationship between the variables and objec-tives, representing the simulation which is time-consuming. Accordingly, two optimization algorithms work out the Pareto solutions, from which the best solutions are selected, and verified by the simulation to determine the gaskets optimized structure parameters. It can be concluded that the simulation and optimization method based on these components is effective and efficient.     

Storage life prediction under pre-strained thermally-accelerated aging of HTPB coating using the change of crosslinking density

In order to predict the storage life of a certain type of HTPB (hydroyl-terminated polybutadiene) coating at 25 C and analyze the influence of pre-strain on the storage life, the accelerated aging tests of HTPB coating at 40 C, 50 C, 60 C, 70 C with the pre-strain of 0%, 3%, 6%, 9%, respectively were carried out. The variation regularity of the change of crosslinking density was analyzed and the aging model of HTPB coating under pre-strained thermally-accelerated aging was proposed. The storage life of HTPB coating at 25 C was estimated by using the Berthelot equation as the end point of the aging life with a 30% decrease in maximum elongation. The results showed that the change of crosslinking density of HTPB coating increased with the increase of aging temperature and aging time, and decreased with the in-crease of pre-strain. Under 0% pre-strain, the relationship between the change of crosslinking density of HTPB coating and the aging time can be described by the logarithmic model with the confidence probability greater than 99%.The stress relaxation phenomenon existed under 3%, 6% and 9% pre-strained aging. The aging model considering chemical aging and pre-strain was established with the confidence probability greater than 90%. The storage life of HTPB coating was 15.2935 years at 25 C under 0% pre-strain, which was reduced by 13.9007%, 75.6949% and 89.7859% under 3%, 6% and 9% pre-strain, respectively. The existence of pre-strain has a serious impact on the storage life of HTPB coating, therefore, the pre-strain should be avoided as much as possible during the actual storage.     

Numerical simulation study on penetration performance of depleted Uranium (DU) alloy fragments

Due to its high strength, high density, high hardness and good penetration capabilities, Depleted ura-nium alloys have already shined in armor-piercing projectiles. There should also be a lot of room for improvement in the application of fragment killing elements. Therefore, regarding the performance of the depleted uranium alloy to penetrate the target plate, further investigation is needed to analyze its advantages and disadvantages compared to tungsten alloy. To study the difference in penetration per-formance between depleted uranium alloy and tungsten alloy fragments,firstly, a theoretical analysis of the adiabatic shear sensitivity of DU and tungsten alloys was given from the perspective of material constitutive model. Then, taking the cylindrical fragment penetration target as the research object, the penetration process and velocity characteristics of the steel target plates penetrated by DU alloy frag-ment and tungsten alloy fragment were compared and analyzed, by using finite element software ANSYS/LS-DYNA and Lagrange algorithm. Lastly, the influence of different postures when impacting target and different fragment shapes on the penetration results is carried out in the research. The results show that in the penetration process of the DU and tungsten alloy fragments, the self-sharpening properties of the DU alloy can make the fragment head sharper and the penetrating ability enhance. Under the same conditions, the penetration capability of cylindrical fragment impacting target in vertical posture is better than that in horizontal posture, and the penetration capability of the spherical fragment is slightly better than that of cylindrical fragment.     

Prediction of three-dimensional elastic behavior of filament-wound composites based on the bridging model

This work provides a method to predict the three-dimensional equivalent elastic properties of the filament-wound composites based on the multi-scale homogenization principle.In the meso-scale,a representative volume element(RVE)is defined and the bridging model is adopted to establish a theoretical predictive model for its three-dimensional equivalent elastic constants.The results obtained through this method for the previous experimental model are compared with the ones gained respec-tively by experiments and classical laminate theory to verify the reliability of this model.In addition,the effects of some winding parameters,such as winding angle,on the equivalent elastic behavior of the filament-wound composites are analyzed.The rules gained can provide a theoretical reference for the optimum design of filament-wound composites.     

ARCS动机模型在初中英语语法教学中的应用

语法学习能在一定程度上保证语言的地道性、流畅性和实用性。但就目前来看,英语学习者学习语法的积极性普遍不高,不少英语学习者抱怨英语语法项目琐碎繁杂、语法学习枯燥无聊。针对此现状,本文尝试将ARCS模型的四类动机策略整合于初中英语语法教学,以期有效激发并维持学习者的语法学习热情,提高语法教学效果。