Electronic warfare in the optical band: Main features,examples and selected measurement data

The paper presents the possibilities of, and methods for, acquiring, analysing and processing optical signals in order to recognise, identify and counteract threats on the contemporary battleground. The main ways electronic warfare is waged in the optical band of the electromagnetic wave spectrum have been formulated, including the acquisition of optical emitter signatures, as well as ultraviolet (UV) and thermal (IR) signatures. The physical parameters and values describing the emission of laser radiation are discussed, including their importance in terms of creating optical signatures. Moreover, it has been shown that in the transformation of optical signals into signatures, only their spectral and temporal parameters can be applied. This was confirmed in experimental part of the paper, which includes our own measurements of spectral and temporal emission characteristics for three types of binocular laser rangefinders. It has been further shown that through simple registration and quick analysis involving comparison of emission time parameters in the case of UV signatures in “solar-blind” band, various events can be identified quickly and faultlessly. The same is true for IR signatures, where the amplitudes of the recorded signal for several wavelengths are compared. This was confirmed experimentally for UV signatures by registering and then analyzing signals from several events during military exercises at a training ground, namely Rocket Propelled Grenade (RPG) launches and explosions after hitting targets, trinitrotoluene (TNT) explosions, firing armour-piercing, fin-stabilised, discarding sabots (APFSDS) or high explosive (HE) projectiles. The final section describes a proposed model database of emitters, created as a result of analysing and transforming the recorded signals into optical signatures.     

红外成像系统对目标的探测能力分析

通过对红外热成像系统实验室综合性能参数MRTD(最小可分辨温差 )在实用条件下的修正 ,提出了实际计算目标探测概率的具体方法和步骤 ,此方法可用来定量评价目标的可探测性和目标隐身技术措施及设计方案的效能。     

装备战损等级评定方法研究

在对战场抢修力量部署进行思考的基础上,分析了战损等级评定影响因素,研究了兼顾装备损伤程度与战场抢修力量设置的战损等级评定方法。从而为装备战场抢修任务分工,以及对损伤装备的处理决断提供了依据,并为开展广泛深入的战损等级评定研究奠定了基础。     

武器系统研制进度风险分析方法研究

首先对大型武器系统研制进度风险分析的一般特点进行了讨论 ,然后根据工期要求紧迫项目的特点 ,利用瑞利分布对进度风险分析的方法进行了研究 ,并结合实例对某系统研制进度风险进行了定量分析     

空袭目标流威胁评估与排序模型研究

结合现代防空作战的特点和指挥自动化系统的工作过程,对影响目标威胁评估的各种因素进行了分析,利用模糊综合评价等理论和方法,给出了进行威胁评估的因素集和评价集,建立了相应的数学模型,叙述了进行威胁评估与排序的方法、步骤和一般准则.     

A bivariate optimal replacement policy for a cold standby repairable system with repair priority

In this article, an optimal replacement policy for a cold standby repairable system consisting of two dissimilar components with repair priority is studied. Assume that both Components 1 and 2, after repair, are not as good as new, and the main component (Component 1) has repair priority. Both the sequence of working times and that of the components'repair times are generated by geometric processes. We consider a bivariate replacement policy (T,N) in which the system is replaced when either cumulative working time of Component 1 reaches T, or the number of failures of Component 1 reaches N, whichever occurs first. The problem is to determine the optimal replacement policy (T,N)* such that the long run average loss per unit time (or simply the average loss rate) of the system is minimized. An explicit expression of this rate is derived, and then optimal policy (T,N)* can be numerically determined through a two‐dimensional‐search procedure. A numerical example is given to illustrate the model's applicability and procedure, and to illustrate some properties of the optimal solution. We also show that if replacements are made solely on the basis of the number of failures N, or solely on the basis of the cumulative working time T, the former class of policies performs better than the latter, albeit only under some mild conditions. © 2010 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

基于BP神经网络的装甲战斗车辆性能指标需求方案评价

针对现行评价方法存在的问题,本文提出了一种基于BP神经网络的装甲战斗车辆性能指标需求方案评价方法。首先给出了装甲战斗车辆性能指标需求方案评价的指标体系,然后阐述了基于BP神经网络的装甲战斗车辆性能指标需求方案评价步骤,最后给出示例证明了方法的可行性。研究表明,该方法能够降低评价过程中人为因素的影响,从而提高了装甲战斗车辆性能指标需求方案评价的准确性。     

院校体制编制调整中的资源优化配置

面对武警新一轮院校体制编制调整,如何优化资源配置,有效规避各种风险,是当前院校需要重点解决的课题。通过调查研究,总结分析了人、财、物等院校资源在体制编制调整中面临的风险,有针对性地提出了人力、财力和物力资源优化配置及规避风险的途径、方法和措施。对于提高资源使用效益,促进院校体制编制调整顺利推进,具有积极的指导和借鉴意义。     

俄罗斯军事人才生成机制对武警视级指挥院校任职教育的启示

俄罗斯军事教育注重培养学员的国家意识,强调教员必须具有很强的综合能力,教学方法灵活、实用,考试方法突出能力素质的考核。俄罗斯军事人才培养形成了注重实战演练、坚持岗位轮换、引进竞争机制、重视鉴定考核的良性机制,保证了人才培养的质量。武警部队初级指挥院校提高任职教育质量应借鉴俄罗斯军事人才培养方法,在培训内容、教员选拔、授课方法、考试形式等方面进行改革。     

灰色预测模型在非致命武器经济寿命预测中的应用

针对目前非致命武器经济寿命方面的研究相当缺乏的现状,结合非致命武器的自身特点,在全面分析装备全寿命周期费用的基础上,引入灰色理论,运用GM（1,1）模型对非致命武器的经济寿命周期费用进行估算和预测。通过分析,灰色预测模型具有较高的建模精度,预测方法和结果对非致命武器的经济寿命预测具有很强的实用性。