Effectiveness of (R,Q) policies in one‐warehouse multiretailer systems with deterministic demand and backlogging

Consider a distribution system with a central warehouse and multiple retailers. Customer demand arrives at each of the retailers continuously at a constant rate. The retailers replenish their inventories from the warehouse which in turn orders from an outside supplier with unlimited stock. There are economies of scale in replenishing the inventories at both the warehouse and the retail level. Stockouts at the retailers are backlogged. The system incurs holding and backorder costs. The objective is to minimize the long‐run average total cost in the system. This paper studies the cost effectiveness of (R, Q) policies in the above system. Under an (R, Q) policy, each facility orders a fixed quantity Q from its supplier every time its inventory position reaches a reorder point R. It is shown that (R, Q) policies are at least 76% effective. Numerical examples are provided to further illustrate the cost effectiveness of (R, Q) policies. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 422–439, 2000     

反舰导弹仿真中的目标命中判断问题

阐述了模型校核的意义和作用。对属于模型校核范畴的仿真中的系统状态不连贯问题的基本概念通过乒乓球的下落和反舰导弹攻击目标舰艇的例子进行了说明。介绍了已有的解决系统状态不连贯问题的三种方法,并进行了优、缺点分析。给出了反舰导弹仿真中的目标命中判断模型。指出,反舰导弹仿真中的目标命中判断问题是一个系统状态不连贯问题。为解决该问题,提出并应用了一种新方法预测法。利用预测法,最多进行两步最小步长仿真,就能够以要求的精确度检测到任何一个系统状态不连贯。相对于以前的三种方法,在提高仿真效率的同时,预测法还能够避免对系统状态不连贯问题的漏检。     

Optimal policies for M/M/m queue with two different kinds of (N,T)‐policies

In this paper, two different kinds of (N, T)‐policies for an M/M/m queueing system are studied. The system operates only intermittently and is shut down when no customers are present any more. A fixed setup cost of K > 0 is incurred each time the system is reopened. Also, a holding cost of h > 0 per unit time is incurred for each customer present. The two (N, T)‐policies studied for this queueing system with cost structures are as follows: (1) The system is reactivated as soon as N customers are present or the waiting time of the leading customer reaches a predefined time T, and (2) the system is reactivated as soon as N customers are present or the time units after the end of the last busy period reaches a predefined time T. The equations satisfied by the optimal policy (N*, T*) for minimizing the long‐run average cost per unit time in both cases are obtained. Particularly, we obtain the explicit optimal joint policy (N*, T*) and optimal objective value for the case of a single server, the explicit optimal policy N* and optimal objective value for the case of multiple servers when only predefined customers number N is measured, and the explicit optimal policy T* and optimal objective value for the case of multiple servers when only predefined time units T is measured, respectively. These results partly extend (1) the classic N or T policy to a more practical (N, T)‐policy and (2) the conclusions obtained for single server system to a system consisting of m (m ≥ 1) servers. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 240–258, 2000     

一种由分抗干扰效果推出合成抗干扰效果的方法

提出了一种在外场雷达对抗试验中,由多部具有分抗干扰措施的雷达的抗干扰效果推出某种具有综合性抗干扰措施的雷达的合成抗干扰效果的方法,以在不具备该种雷达的情况下,用多部具有分抗干扰措施的雷达来代替它作为被干扰对象,在外场进行干扰机对其干扰的干扰效果试验检验。     

防空导弹横向振动响应计算研究

随机气流与舵面的运动将给弹体造成随机载荷 ,用模态叠加法编写程序计算了该激励产生的随机响应     

一类非线性问题的数值分析

利用Ｌａｐｌａｃｅ方程的基本解,将变系数非齐次Ｈｅｌｍｈｏｌｔｚ偏微分方程的边值问题化为积分方程问题。再用边界无法进行离散,并对区域结点及边界结点的方程耦合求解。文末算例表明本文方法能够达到较高精度。     

一种新的保持分形特征的分形变形方法

针对IFS吸引子变形过程中间出现的分形特征退化的问题,提出基于局部吸引子的近似凸包及旋转匹配的特征对应方法.IFS吸引子的局部吸引子可由独立的IFS生成,IFS中每个压缩仿射映射存在不动点,构造所有不动点的凸包,即得到局部近似凸包;证明了局部近似凸包间的相似对应等价于局部吸引子间的相似对应,并提出了通过旋转匹配的特征对应方法实现局部近似凸包的配对,最后计算所有配对下相似度最高的一组局部近似凸包匹配,确定局部吸引子间的特征对应,即IFS特征对应.对两个IFS进行线性插值可实现保持分形特征的分形变形.     

气体化学反应速率的 DSMC 方法

为预报化学反应过程,应用ＤＳＭＣ方法研究了双原子分子的离解反应,讨论了高温情况下（Ｔ～Ｅａ／ｋ）采用由实验测定得到的反应速率与气体温度间Ａｒｒｈｅｎｉｕｓ经验关系式的可靠性问题,分析了振动热非平衡效应对于离解反应速率的影响,给出了由ＤＳＭＣ方法得到的离解反应速率与气体温度的关系曲线。     

一种雷达类型识别方法

针对目前雷达辐射源识别中存在的,对于数据库中未存储的雷达类型识别能力较差的情况,提出了一个雷达辐射源识别系统,在系统中将雷达的识别分为已知雷达识别和未知雷达识别两个部分分别进行,并给出了系统各个组成部分的实现原理。试验证明,本系统对于未知的雷达类型有着较强的识别能力。