灰色-马尔科夫模型在机场道面使用性能预测中的应用

介绍利用灰色-马尔科夫模型对机场道面使用性能进行预测的基本方法和具体步骤,并给出了工程实例.应用分析表明,该方法能够充分利用机场道面使用中各段历史数据,较好地对机场道面使用性能进行预测,且预测结果比单纯的灰色模型有更高的精度.     

双门式炮闩膨胀波火炮内弹道建模与仿真

根据膨胀波火炮的发射原理,针对两种不同开闩方式分别进行讨论,着重对最新设计研制的双门式炮闩膨胀波火炮进行内弹道建模与仿真,并将仿真结果与同型号常规封闭火炮的内弹道性能进行对比。结果表明,在相同装填条件下,膨胀波火炮在不影响弹丸初速的前提下能大幅度减小火炮后坐冲量和身管温度。     

军事物流单证的信息服务研究

物流单证是物流系统之间数据交换的载体,是实现物流业务流程无缝衔接的条件。文章介绍了物流单证结构,研究了军事物流单证的信息交换过程,建立了军事物流单证的信息交换架构,探讨了军事物流单证信息查询和业务状态信息跟踪服务。     

SEA的侦察与监测系统效能分析

侦察与监测系统已成为现代C3I系统的重要组成部分,其效能评估既有C3I系统的一般性又有自身的特殊性。首先在一般系统效能含义上定义了侦察与监测系统的系统效能,比较了几种典型的C3I系统评估方法。在此基础上,将SEA方法应用于分析侦察与监测系统效能,并将情报信息量作为效能度量的指标。最后给出了分析计算过程和仿真结果。     

超视距反舰导弹射击方式优化选择

射击方式的选择是反舰导弹作战使用的重要内容。在超视距作战需求的牵引下,传统视距反舰导弹的射击方式受到了巨大挑战。为优化选择超视距反舰导弹的射击方式,建立了两种常用射击方式的导弹捕捉概率模型和目标机动模型,给出一种典型条件不同目标机动航向的导弹捕捉概率,结果表明采用有前置量方式射击无法有效提高超视距导弹的捕捉概率,甚至在某些典型条件下还低于无前置量方式射击的捕捉概率,指出无前置方式是超视距反舰导弹射击的优选方式。     

基于FMECA的某型雷达系统故障分析

故障模式、影响及危害性分析 (简称FMECA)是提高系统可靠性的一种有效的工具。在雷达系统故障分析中运用FMECA方法 ,通过计算机辅助程序实现了故障分析的预测分析和定量分析。与传统的故障分析方法相比 ,该方法能够避免分析中的盲目性和主观性 ,可以获得更为准确的分析结果     

A novel noise reduction technique for underwater acoustic signals based on complete ensemble empirical mode decomposition with adaptive noise,minimum mean square variance criterion and least mean square adaptive filter

Underwater acoustic signal processing is one of the research hotspots in underwater acoustics. Noise reduction of underwater acoustic signals is the key to underwater acoustic signal processing. Owing to the complexity of marine environment and the particularity of underwater acoustic channel, noise reduction of underwater acoustic signals has always been a difficult challenge in the field of underwater acoustic signal processing. In order to solve the dilemma, we proposed a novel noise reduction technique for underwater acoustic signals based on complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN), minimum mean square variance criterion (MMSVC) and least mean square adaptive filter (LMSAF). This noise reduction technique, named CEEMDAN-MMSVC-LMSAF, has three main advantages: (i) as an improved algorithm of empirical mode decomposition (EMD) and ensemble EMD (EEMD), CEEMDAN can better suppress mode mixing, and can avoid selecting the number of decomposition in variational mode decomposition (VMD); (ii) MMSVC can identify noisy intrinsic mode function (IMF), and can avoid selecting thresholds of different permutation entropies; (iii) for noise reduction of noisy IMFs, LMSAF overcomes the selection of decomposition number and basis function for wavelet noise reduction. Firstly, CEEMDAN decomposes the original signal into IMFs, which can be divided into noisy IMFs and real IMFs. Then, MMSVC and LMSAF are used to detect identify noisy IMFs and remove noise components from noisy IMFs. Finally, both denoised noisy IMFs and real IMFs are reconstructed and the final denoised signal is obtained. Compared with other noise reduction techniques, the validity of CEEMDAN-MMSVC-LMSAF can be proved by the analysis of simulation signals and real underwater acoustic signals, which has the better noise reduction effect and has practical application value. CEEMDAN-MMSVC-LMSAF also provides a reliable basis for the detection, feature extraction, classification and recognition of underwater acoustic signals.     

Experimental study on explosion dispersion process of a multi-layer composite charge under different initiation modes

The influence of initiation modes on the explosive dispersion process of the multi-layer composite charge (MCC) was studied. Overpressure sensors and high-speed photography system were used to investigate the energy release process of an MCC with a specific structure. The shock wave pressure and explosive dispersion characteristics of the MCC under different initiation modes were compared. The forming and expanding process of the shock wave of the composite charge under different initiation modes was determined. The separation position of the shock wave and fireball interface was determined. The calculation formulas of the shock radius and overpressure of the composite charge are presented. The radius of the shock wave of the composite charge was significantly affected by the initiation mode. Moreover, the development process of the composite explosive fireball under different initiation modes was analyzed, the variation rules of the composite charge dispersion radius and fireball dispersion velocity with time were obtained under the different initiation modes, the explosion energy release rate of composite charge under simultaneous initiation modes was the highest, and the peak overpressure under the simultaneous initiation mode was 1.61 times that of central single-point initiation.     

温度对半导体激光器退化的影响

采取等效电路模型仿真和加速退化试验相结合的方法研究温度对半导体激光器不同退化模式的影响规律。针对半导体激光器有源区退化和腔面退化进行分析,发现有源区退化会使半导体激光器阈值电流增大,而腔面退化会使半导体激光器斜率效率减小;进行了半导体激光器热特性建模与仿真,发现温度升高会使半导体激光器阈值电流增大;利用半导体激光器加速退化试验平台进行了半导体激光器加速退化试验。仿真与试验结果证明:温度升高会加剧半导体激光器腔面退化,而对有源区退化无显著影响。上述结论对进一步完善半导体激光器温度-退化仿真模型,研究温度对半导体激光器退化的作用机理和防护措施有积极作用。     

Pricing and capacity allocation strategies: Implications for manufacturers with product sharing

Emerging sharing modes, like the consumer-to-consumer (C2C) sharing of Uber and the business-to-consumer (B2C) sharing of GoFun, have considerably affected the retailing markets of traditional manufacturers, who are motivated to consider product sharing when making pricing and capacity decisions, particularly electric car manufacturers with limited capacity. In this paper, we examine the equilibrium pricing for a capacity-constrained manufacturer under various sharing modes and further analyze the impact of capacity constraint on the manufacturer's sharing mode selection as well as equilibrium outcomes. We find that manufacturers with low-cost products prefer B2C sharing while those with high-cost products prefer C2C sharing except when the sharing price is moderate. However, limited capacity motivates manufacturers to enter into the B2C sharing under a relatively low sharing price, and raise the total usage level by sharing high-cost products. We also show that the equilibrium capacity allocated to the sharing market with low-cost products first increases and then decreases. Finally, we find that sharing low-cost products with a high limited capacity leads to a lower retail price under B2C sharing, which creates a win-win situation for both the manufacturer and consumers. However, sharing high-cost products with a low limited capacity creates a win-lose situation for them.