湿式报警阀组漏误报原因及对策

从自动喷水灭火系统工程验收和日常防火监督检查发现的问题出发,就湿式报警阀组漏、误报原因进行深入分析,指出了设计不合理、水力警铃安装位置不当、未设延迟器、管网中气囊未排除和施工安装不到位等造成湿式报警阀组漏、误报的常见原因,并提出把好设计、审核、施工、安装等环节,消除湿式报警阀组漏、误报的隐患。     

实施人才强校战略 促进学校可持续发展

高等学校处于重要的发展机遇期。人才是促进学校持续、健康、协调发展的关键。以科学发展观为指导,实施人才强校战略是保证发展的重大举措。坚持开拓创新的精神和求真务实的作风,不断开创高校人才工作新局面。     

基于湍流冲击振动的输油管道稳定性研究

要水流冲刷管底形成悬空管道,悬空管道假设为一端固定一端铰支的均质等截面简支梁。在分析管道垂直载荷对悬空管道临界长度影响的基础上,考虑到输油管道振动引起的动应力以及管道振动时的外部阻尼、管道轴向力和内压对管道的作用,对悬空管道进行受力分析,导出管道振动微分方程。以保证管道强度的安全可靠为判据,计算求出悬空管道的临界长度,以便预测管道失稳条件,并对其及时采取稳固及抢修措施。     

矿物掺合料对GRC耐久性的影响

通过长达3年的标准养护试验及80℃热水加速老化试验,研究了矿物掺合料粉煤灰、硅灰对耐碱玻璃纤维增强普通硅酸盐水泥(GRC)耐久性的影响,并对矿物掺合料改善GRC耐久性的机理作了初步分析探讨。研究结果表明,粉煤灰和硅灰矿物掺合料可明显改善GRC的长期耐久性。     

Repairable consecutive‐k‐out‐of‐n: F system with Markov dependence

In this article, a model for a repairable consecutive‐k‐out‐of‐n: F system with Markov dependence is studied. A binary vector is used to represent the system state. The failure rate of a component in the system depends on the state of the preceding component. The failure risk of a system state is then introduced. On the basis of the failure risk, a priority repair rule is adopted. Then the transition density matrix can be determined, and the analysis of the system reliability can be conducted accordingly. One example each of a linear and a circular system is then studied in detail to explain the model and methodology developed in this paper. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 18–39, 2000     

基于FMECA的某型雷达系统故障分析

故障模式、影响及危害性分析 (简称FMECA)是提高系统可靠性的一种有效的工具。在雷达系统故障分析中运用FMECA方法 ,通过计算机辅助程序实现了故障分析的预测分析和定量分析。与传统的故障分析方法相比 ,该方法能够避免分析中的盲目性和主观性 ,可以获得更为准确的分析结果     

坦克炮塔方向机不自锁情况分析

59式坦克和62式坦克炮塔方向机,在使用中多次出现过不自锁现象,针对这种情况,从设计上找出了原因,提出了防止不自锁的措施,并对改进的第二代、第三代炮塔方向机自锁情况进行了剖析.     

Effect of transverse compression on the residual tensile strength of ultrahigh molecular weight polyethylene (Dyneema® SK-76) yarns

Ballistic impact induces complex stress states on fiber-based armor systems. During impact fibers undergo multiaxial loading which includes axial tension, axial compression, transverse compression, and transverse shear. Transverse compression induced by the projectile leads to permanent deformation and fibrillation of fibers resulting in degradation of material tensile strength. Previous work (Sockalingam et al. Textile Res. J 2018) has shown a reduction of 20% in the tensile strength of Dyneema® SK76 single fibers subjected to 77% nominal transverse compressive strains. Experimental investigation of quasi-static transverse compression on Dyneema® SK-76 yarns, unconstrained in the lateral direction, indicate an average of 4% reduction in tensile strength of yarns compressed to 77% nominal strains. In this work we use finite element modeling techniques to understand the difference in residual tensile strength between single fibers and yarns observed in laterally unconstrained transverse compression experiments. Finite element study of the transverse compression response of single fibers and yarns indicate that local strains developed in fibers within the yarn are much lower than the local strains developed in single fibers subjected to a given nominal strain and may explain the less reduction in strength observed in yarns.     

共址调频和调幅系统干扰机理及干扰抑制需求分析

以调幅和调频电台为研究对象,对共平台接收电台前端低噪声放大器的非线性进行精确建模,分别对调幅电台和调频电台的干扰抑制需求进行解析,并通过数值仿真对解析模型进行验证。结果表明:所提解析模型较现有模型更为准确;当有用信号功率、噪声功率和干扰功率相同时,调幅通信系统的干扰抑制需求高于调频通信系统。     

Optimal redesign decisions through failure rate estimates

To reduce the time-to-market of newly developed systems, manufacturers increasingly adopt strategies where systems are brought to market while system field reliability is still uncertain. These systems are typically sold under performance-based contracts, which incentivizes potential customers to invest in them despite reliability uncertainty. Such contracts make the manufacturer (partly) responsible for the availability of the system. Subsequently, when field reliability is lower than anticipated, the manufacturer may choose to redesign the system to avoid high contract penalties. Redesign is a costly effort which may substantially increase field reliability. Deciding when to redesign is challenging, especially because the initial failure rate estimate by the system's engineers is refined over time as failure data accrues. We propose a model that endogenizes the failure rate updating to analyze this tactical redesign decision. We study additive and multiplicative redesigns and show that the optimal policy has a control limit structure. We benchmark our optimal policy against a static counterpart numerically, and conclude that basing redesign decisions on the updated estimate of the failure rate can substantially reduce costs.