电磁轨道发射中内弹道动力响应特性分析

将轨道简化为移动载荷作用下固定在弹性支撑上的Bernoulli-Euler梁,通过静态电磁-结构耦合有限元模型求得外围封装的等效刚度,计算得到发射器的临界速度。另外,利用混合有限元/边界元法建立电磁-结构-运动多物理场耦合的动力学模型,求得枢轨动态接触压力和轨道的应力应变分布特性。通过在轨道背面布置光纤光栅应变传感器,利用测量数据验证了动力响应特性,并分析了弹丸在内弹道的稳定性。针对典型30 mm × 30 mm矩形口径发射器,分析及试验结果表明：C型电枢对轨道的电磁挤压力在平顶沿起始时刻达到最大值,之后随着时间推移逐渐减小;电枢通过引起的应力波在高速段容易与轨道中反射应力波发生共振,并且轨道在电枢运动的中间高速段区域受力最为集中,应力集中水平约是起始低速段区域的2.44倍;电枢运动高速段会出现晃动现象,进而引起上下轨道受力的不对称性。分析及试验结果对研究电磁轨道发射器内弹道动力响应特性和发射器结构设计具有重要指导意义。     

超声速气流中液体横向射流一次破碎过程

发展显微成像方法获得空间分辨率为1.57 μm/pixel的近场射流瞬态图像,分析超声速气流中液体横向射流表面波演化规律。采用流体体积法获得射流的三维形态及近场流场特征,研究近场流场结构及气液作用。射流的一次破碎过程主要有表面破碎和液柱破碎。其中表面破碎由气液剪切引起的K-H不稳定主导,液柱破碎由气液加速引起的R-T不稳定主导;射流柱表面局部压力的脉动是诱导产生射流迎风面表面波并促使其沿射流方向发展的主要原因;射流柱与超声速气流作用形成背风面回流,近壁面液雾主要由表面破碎及背风面回流输运的液滴组成。     

Numerical simulation of the blast wave of a multilayer composite charge

The numerical simulation of a blast wave of a multilayer composite charge is investigated. A calculation model of the near-field explosion and far-field propagation of the shock wave of a composite charge is established using the AUTODYN finite element program. Results of the near-field and far-field calculations of the shock wave respectively converge at cell sizes of 0.25–0.5 cm and 1–3 cm. The Euler––flux-corrected transport solver is found to be suitable for the far-field calculation after mapping. A numerical simulation is conducted to study the formation, propagation, and interaction of the shock wave of the composite charge for different initiation modes. It is found that the initiation mode obviously affects the shock-wave waveform and pressure distribution of the composite charge. Additionally, it is found that the area of the overpressure distribution is greatest for internal and external simultaneous initiation, and the peak pressure of the shock wave exponentially decays, fitting the calculation formula of the peak overpressure attenuation under different initiation modes, which is obtained and verified by experiment. The difference between numerical and experimental results is less than 10%, and the peak overpressure of both internal and external initiation is 56.12% higher than that of central single-point initiation.     

Experimental research on the instability propagation characteristics of liquid kerosene rotating detonation wave

In order to study the instability propagation characteristics of the liquid kerosene rotating detonation wave (RDW), a series of experimental tests were carried out on the rotating detonation combustor (RDC) with air-heater. The fuel and oxidizer are room-temperature liquid kerosene and preheated oxygen-enriched air, respectively. The experimental tests keep the equivalence ratio of 0.81 and the oxygen mass fraction of 35% unchanged, and the total mass flow rate is maintained at about 1000 g/s, changing the total temperature of the oxygen-enriched air from 620 K to 860 K. Three different types of instability were observed in the experiments: temporal and spatial instability, mode transition and re-initiation. The interaction between RDW and supply plenum may be the main reason for the fluctuations of detonation wave velocity and pressure peaks with time. Moreover, the inconsistent mixing of fuel and oxidizer at different circumferential positions is related to RDW oscillate spatially. The phenomenon of single-double-single wave transition is analyzed. During the transition, the initial RDW weakens until disappears, and the compression wave strengthens until it becomes a new RDW and propagates steadily. The increased deflagration between the detonation products and the fresh gas layer caused by excessively high temperature is one of the reasons for the RDC quenching and re-initiation.     

Analysis of the stress wave and rarefaction wave produced by hypervelocity impact of sphere onto thin plate

Shock wave is emitted into the plate and sphere when a sphere hypervelocity impacts onto a thin plate. The fragmentation and phase change of the material caused by the propagation and unloading of shock wave could result in the formation of debris cloud eventually. Propagation models are deduced based on one-dimensional shock wave theory and the geometry of sphere, which uses elliptic equations (corresponding to ellipsoid equations in physical space) to describe the propagation of shock wave and the rarefaction wave. The “Effective thickness” is defined as the critical plate thickness that ensures the rarefaction wave overtake the shock wave at the back of the sphere. The “Effective thickness” is directly related to the form of the debris cloud. The relation of the “Effective thickness” and the “Optimum thickness” is also discussed. The impacts of Al spheres onto Al plates are simulated within SPH to verify the propagation models and associated theories. The results show that the wave fronts predicted by the propagation models are closer to the simulation result at higher impact velocity. The curvatures of the wave fronts decrease with the increase of impact velocities. The predicted “Effective thickness” is consistent with the simulation results. The analysis about the shock wave propagation and unloading in this paper can provide a new sight and inspiration for the quantitative study of hypervelocity impact and space debris protection.     

分段计算方法在模拟爆炸应力波传播中的运用

针对爆炸加载下岩石响应的不同特点以及动力有限元和传统地震波模拟方法的局限性,提出了一种分段计算的数值模拟方法.该方法在空间上将所模拟的区域划分为非弹性段和弹性段,非弹性段内采用动力有限元计算方法,弹性段内采用传统的地震波方法,不同段之间以节点位移为边界条件.不同算法的数值模拟结果验证了分段计算方法用于模拟爆炸荷载产生地震波的有效性和正确性.     

球齿轮传动的齿面接触分析和应力分析

球齿轮是一种新型的二维齿轮传动机构.在建立了球齿轮数学模型的基础上,得到了球齿轮传动的啮合模型,并进行了齿面接触特性分析,通过解非线性方程组,可得到接触点在齿面的位置.分析了球齿轮齿面的结构特征,针对球齿轮传动的接触形式表现为轮齿凸面与马鞍面之间的点接触,对啮合齿面的接触椭圆进行了分析计算,总结出了球齿轮在任一偏摆平面内啮合传动时接触椭圆的变化规律:在轮齿根部和顶部啮合时,接触椭圆较小,因而接触应力较大;而在轮齿中部啮合时,接触椭圆较大,所以接触应力较小.采用有限元的方法对球齿轮轮齿进行了弯曲应力和接触应力分析,分析结果进一步验证了接触椭圆变化规律的正确性.以上结论对进一步研究球齿轮的传动理论与实际应用具有重要的指导意义.     

高频地波超视距雷达述评

高频(HF)地波超视距雷达(GW-OTHR)利用雷达波束绕地表面衍射作用,能探测视距外的舰船、低空飞机和巡航导弹,不仅覆盖面积大、费用低,能弥补常规微波雷达低空盲区和天波超视距雷达的近距盲区,也无需注意电离层的变化,且可反隐身、抗反辐射导弹(ARM),因而在许多国家的国民经济和国防领域中得到了广泛的应用。论述了地波沿海面传播的特性和探测能力,并对超视距雷达的发展和应用进行了介绍。     

理、情、意、行——思想政治工作的四要素

我国思想政治工作者在实践中总结出来的"晓之以理、动之以情、持之以恒、导之以行"的十六字方针,是对思想政治工作规律的反映,其中的"理"、"情"、"意"、"行"是做好思想政治工作的四个基本因素,它们在思想政治工作中起着各自不可替代的作用.     

高速方尾水面舰船兴波问题计算方法研究

将Dawson型兴波阻力计算方法推广用于高速方尾水面舰船兴波问题计算,在计算中同时计入了尾封板0静压力、尾倾与下沉等因素的影响.以两高速方尾水面舰船为例计算了兴波问题,将兴波阻力计算值与剩余阻力模型试验值进行了比较,求出了相应的相关系数.结果表明,本方法可较好地求解高速方尾水面舰船的兴波问题,兴波阻力相关系数可用于修正理论计算结果,以提高计算精度.