波浪扰动下的小型潜射导弹出水动力学建模与仿真

运用Morison公式,提出波浪扰动作用下,考虑弹体运动与波浪耦合的导弹出水过程动力学模型,并对小型潜射导弹的出水过程进行仿真和分析。以弹体姿态变化为例,研究弹体运动与波浪间的耦合关系对波浪扰动作用的影响,分析海情等级、波浪相位、出水速度、出水姿态角等因素对导弹出水过程的影响。结果表明,考虑弹体运动与波浪间耦合关系的出水动力学模型更加准确;潜射导弹的小型性和快速出水特性有利于降低波浪对导弹出水姿态的影响;对快速出水的潜射导弹,波浪扰动分析时须考虑海情等级、出水时间和波浪相位的影响。     

位移不连续法在裂纹扩展仿真中的应用

探讨了在应用位移不连续法仿真裂纹扩展时对加载方式、裂纹扩展长度及应力强度因子计算等问题的处理方法,并据此编制了仿真程序,分析了裂纹在单向压载作用下的扩展趋势和应力变化,具有一定的工程应用价值。     

多点偏心起爆对破片速度增益的影响

多点偏心起爆后,爆轰波相互作用在定向区域内产生了马赫波超压,使得该区域破片速度产生增益.利用爆轰波反射理论,建立多点偏心起爆后爆轰波相互作用特性的理论模型,并确定定向区内破片速度的增益特性.3种不同起爆方式的仿真计算和静爆试验结果对比表明,定向区内不同起爆方式得到的破片增益程度较为吻合.     

调频连续波ISAR目标微多普勒特征分析

分析了调频连续波逆合成孔径雷达(FMCW-ISAR)的回波信号特性,讨论了脉冲持续时间内目标连续运动引起的多普勒频移对成像的影响,推导出导致一维距离像主瓣展宽和走动的相位因子,并进一步研究了该相位因子对基于调频连续波逆合成孔径雷达的目标微多普勒特征的影响,在此基础上讨论了调频连续波逆合成孔径雷达目标微多普勒特征与脉冲式逆合成孔径雷达目标微多普勒特征的主要区别.最后的仿真试验验证了理论分析的正确性.     

《绿野仙踪》“世情化”的艺术手法

作为一部跨类型小说,精彩的世情描写和高超的写实艺术使《绿野仙踪》在清中期的小说中独树一帜。它在人物塑造和结构技法上深受世情小说创作手法的影响,运用现实主义表现手法塑造出众多的＂正邪两赋＂之人;而＂草蛇灰线＂法的运用,则让原本庞杂的内容有了潜在的联系。     

中国共产党90年的奋皇功绩与经验启示

中国共产党90年,以艰苦卓绝的奋斗取得了丰功伟绩,积累了深刻宝贵的基本经验和启示：不负重托,不辱使命;保持先进性;把马克思列宁主义基本原理与中国具体实际情况和时代基本特征相结合;一切为了和紧紧依靠人民群众;加强和改进自身建设。     

Experimental and numerical study of the blast wave decrease using sandwich panel by granular materials core

Among the intrinsic properties of some materials, e.g., foams, porous materials, and granular materials, are their ability to mitigate shock waves. This paper investigated shock wave mitigation by a sandwich panel with a granular core. Numerical simulations and experimental tests were performed using Autodyn hydro-code software and a shock tube, respectively. The smoothed particle hydrodynamics (SPH) method was used to model granular materials. Sawdust and pumice, whose properties were determined by several compression tests, were used as granular materials in the sandwich panel core. These granular materials possess many mechanisms, including compacting (e.g., sawdust) and crushing (e.g., pumice) that mitigate shock/blast wave. The results indicated the ineffectiveness of using a core with low thickness, yet it was demonstrated to be effective with high thickness. Low-thickness pumice yielded better results for wave mitigation. The use of these materials with a core with appropriate core reduces up to 88% of the shock wave. The results of the experiments and numerical simulations were compared, suggesting a good agreement between the two. This indicates the accuracy of simulation and the ability of the SPH method to modeling granular material under shock loading. The effects of grain size and the coefficient of friction between grains have also been investigated using simulation, implying that increasing the grain size and coefficient of friction between grains both reduce overpressure.     

Influences of different crossing types on dynamic response of underground cavern subjected to ground shock

An intersecting cavern is a common structural form used in underground engineering, and its safety and stability performance directly control the service performance of the whole project. The dynamic re-sponses of the three kinds of crossing type (+-shaped, T-shaped, L-shaped) caverns subjected to ground shock were studied by numerical simulation. The velocity plus force mode boundary setting method was proposed in the coupled static and dynamic analysis of a deep underground cavern. The results show that, among the three types of crossing caverns, the+-shaped cavern is the most significantly affected by the dynamic action, followed by T-shaped, and then L-shaped caverns. The vault settlement, straight wall deformation, vault peak particle velocity, effective plastic strain of surrounding rock, and maximum principal stress and strain at the bottom of the lining of the straight wall increase with the increase of cavern span. The vault settlement, straight wall deformation, effective plastic strain of surrounding rock, and the maximum principal stress and strain at the bottom of lining to the straight wall decrease with the increase of lateral pressure coefficient, and the peak particle velocity at the vault increases. The variation is small compared with the change of cavern span. The influence range of the underground cavern intersection is two cavern diameters from the intersection centre. The bottom of the straight wall at the intersection is the weak part. It is suggested to thicken the support locally to improve the stability of the cavern.     

Effect of friction stir processing on mechanical properties and heat transfer of TIG welded joint of AA6061 and AA7075

Tungsten inert gas (TIG) welding is the most commonly used joining process for aluminum alloy for AA6061 and AA7075 which are highly demanded in the aerospace engineering and the automobile sector, but there are some defects occur during TIG welding like micro-crack, coarse grain structure, and porosity. To improve these defects, the TIG welded joint is processed using friction stir processing (FSP). This paper presents the effect of friction stir processing on TIG welding with filler ER4043 and ER 5356 for dissimilar aluminum alloy AA6061 and AA7075. The mechanical characterization, finite element formulation and mathematical equations of heat transfer of TIG + FSP welded joints are investigated using ANSYS Fluent software by adjusting process parameters of FSP. The results show that the maximum compressive residual stress 73 MPa was obtained at the fusion zone (FZ) of the TIG weldment with filler ER4043, whereas minimum compressive residual stress 37 MPa was obtained at stir zone (SZ) of the TIG+FSP with filler 5356. The maximum heat flux 5.33 × 106 W/m2 and temperature 515 ℃ have observed at tool rotation 1600 rpm with a feed rate of 63 mm/min. These results give a satisfactory measure of confidence in the fidelity of the simulation     

自润滑弹带挤进过程中渗出油量的对比计算

从弹带的作用及特性出发, 通过数值计算和统计计算 2种方法计算了自润滑弹带挤进过程中的渗出油量,初步得出了渗出油量和行程之间的关系。这一问题的解决为自润滑弹带材料的选择提供了理论依据。通过对 2种算法的比较可知, 数值计算误差更小一些, 而统计计算对数学条件要求不太苛刻。