土中爆炸对埋地管线冲击作用的数值模拟分析

为了研究土中爆炸作用下埋地管线的安全问题,利用AUTODYN-2D、AU?TODYN-3D程序,采用程序提供的流固耦合功能和网格映射功能,对爆炸地冲击作用下埋地管线的变形和破坏问题进行了数值模拟分析,得到不同爆心间距管线的应力峰值.将模拟计算结果和理论计算结果进行了对比分析,结果表明:模拟计算值与TM5-855-1手册理论计算值比较吻合,表明采用数值模拟方法分析爆炸地冲击对埋地管线的作用是可行的,计算结果对地下爆破的安全施工和埋地管线的安全运行具有参考价值.     

Sandwich structure for enhancing the interface reaction of hexanitrohexaazaisowurtzitane and nanoporous carbon scaffolds film to improve the thermal decomposition performance

Improving the thermal decomposition performance of hexanitrohexaazaisowurtzitane (CL-20) by appropriate methods is helpful to promote the combustion performance of CL-20-based solid propellants. In this study, we synthesized a sandwich structure of CL-20 and nanoporous carbon scaffolds film (NCS) and emphatically studied the thermal decomposition performance of the composite structure. Thermogravimetric analysis and differential scanning calorimetry were used to measure the thermal decomposition process of the composite structure. The kinetic parameters of thermal decomposition were calculated by the thermal dynamic analysis software AKTS. These results showed that the thermal decomposition performance of the sandwich structure of CL-20 and NCS was better than CL-20. Among the tested samples, NCS with a pore size of 15 nm had the best catalytic activity for the thermal decomposition of CL-20. Moreover, the thermal decomposition curve of the composite structure at the heating rate of 1 K/min was deconvoluted by mathematical method to study the thermal decomposition process. And a possible catalytic mechanism was proposed. The excellent thermal decomposition performance is due to the sandwich structure enhances the interface reaction of CL-20 and NCS. This work may promote the extensive use of CL-20 in the field of solid rocket propellant.     

Thermal hazard assessment of TKX-50-based melt-cast explosive

In the present study, thermal hazards of TNT and DNAN used as the molten binder in TKX-50-based melt-cast explosives were comparatively studied through accelerating rate calorimeter (ARC) and Cook-off experiments. Two kinds of ARC operation modes were performed to investigate the thermal safety performance under adiabatic conditions (HWS mode) and constant heating (CHR mode). The obtained results demonstrated that at both heating modes, DNAN/TKX-50 outperformed TNT/TKX-50 from the thermal safety point of view. However, the sensitivity to heat of the samples was reverse because of the different heating modes. In addition, the results of thermal hazard assessment obtained from the cook-off experiment complied with ARC analysis which indicated the molten binder TNT replaced by DNAN would reduce the hazard of the TKX-50 melt cast explosive. Furthermore, the results of cook-off experiments also showed that DNAN/TKX-50 outperformed TNT/TKX-50 from the aspect of thermal stability, which was consistent with the result of CHR mode because of the similar heating process.     

粉尘爆炸事故预防及其扑救对策研究

可燃粉尘爆炸是危害人类生产生活的一类主要事故。要有效预防粉尘爆炸事故造成的危害,准确掌握其爆炸原理,研究其爆炸特性是非常必要的。探讨了粉尘爆炸的基本特征,研究了粉尘爆炸的条件和机理及影响粉尘爆炸的因素。详细论述了粉尘爆炸火灾的特点及其危害。研究了预防粉尘爆炸及降低粉尘爆炸破坏作用的对策,并指出了在灭火战斗中应注意的问题。     

水下近场非接触爆炸载荷作用下加筋板毁伤变形的数值仿真研究

采用高动态非线性有限元程序MSC.Dytran对复杂加筋板结构在水下爆炸载荷下的动态响应和变形模式进行了仿真分析和模型试验,建立了复杂加筋板架结构水下爆炸作用下动态响应的有限元计算方法.研究了加筋板在水下爆炸载荷下的不同毁伤形式,并利用有限元程序对复杂毁伤形式进行了瞬态毁伤过程分析,认为一定药量近距离爆炸时局部破坏要先于整体破坏.     

圆柱形装药驱动轴向预制破片飞散特性

为了增强柱形战斗部轴向威力,在无壳柱形战斗部底面布置单层离散的预制破片.开展圆柱形TNT装药驱动轴向预制破片飞散试验,获得预制破片的最大初速、飞散角等特征参数;运用LS-DYNA软件对装药驱动预制破片过程进行数值模拟,阐述预制破片群飞散过程;对装药驱动整体平板理论计算公式进行改进,获得预制破片的最大初速.结果表明:破片...     

复合材料新的热层合理论及其有限元方法研究

本文基子三维各向异性热传导方程和复合材料的一般层合理论,推导出复合材料层合结构瞬态温度场分析的新的热层合理论,并依据此理论建立了简单、实用的有限元格式。数值算例表明：基于热层合理论的有限元方法有较好的精度,同时又比传统的分析方法更简便、有效。     

基于封闭爆炸的弹药破片空间分布研究

通过典型弹丸爆炸试验,研究封闭条件下破片的空间分布,提出了爆炸洞体防护的重点区域。试验表明:对于某型高弹丸,主要分布在以弹丸为爆炸中心的20°角的环状严重区域内;对于某型加弹丸,主要分布在以弹丸为爆炸中心的35°角的环状严重区域内。     

焊接切割与火灾

焊割火灾事故呈上升趋势。文章分析了焊割火灾爆炸危险性,并提出了预防措施。     

Real-time calculation of fragment velocity for cylindrical warheads

To simulate explosion fragments, it is necessary to predict many variables such as fragment velocity, size distribution and projection angle. For active protection systems these predictions need to be made very quickly, before the weapon hits the target. Fast predictions also need to be made in real time simulations when the impact of many different computer models need to be assessed. The research presented in this paper focuses on creating a fast and accurate estimate of one of these variables - the initial fragment velocity. The Gurney equation was the first equation to calculate initial fragment velocity. This equation, sometimes with modifications, is still used today where finite element analysis or complex mathematical approaches are considered too computationally expensive. This paper enhances and improves Breech’s two-dimensional Gurney equation using available empirical data and the principals of conservation of momentum and energy. The results are computationally quick, providing improved accuracy for estimating initial fragment velocity. This will allow the developed model to be available for real-time simulation and fast computation, with improved accuracy when compared to existing approaches.