舰船电缆热老化寿命的研究

介绍了某船用电缆热老化寿命研究的有关试验和结果分析．对电统绝缘材料失效的判断、机械性能变化的预测,以及如何根据电缆的负载情况和周围的环境温度确定绝缘材料的老化温度等,提出了相应的观点和方法．     

拉压异性材料具有圆孔的无限大薄板的极限分析

利用莫尔屈服准则,对拉压异性材料具有圆孔的无限大薄板进行了极限分析。计算结果表明,材料的拉压异性对结构的极限承载能力和弹塑性状态都有明显的影响。考虑了材料拉压异性的影响,分析结果更具一般性。     

基于NNLI技术的齿轮箱故障诊断

将NNLI技术应用到齿轮箱的故障诊断中,提出了基于NNLI的特征提取方法,并将该方法与神经网络结合起来,进一步提出基于NNLI特征提取的神经网络故障诊断方法,给出了两种不同的网络分类器,通过齿轮箱故障诊断实例验证了该方法的有效性。     

基于BP神经网络带调压器直流发电机特性的辨识

为使坦克直流发电机的调压特性实验能够在计算机上仿真进行,节约教学实验成本,可利用神经网络对直流发电机的调压特性进行辨识,得到了比手工绘制精度更高的特性曲线.因此,调压特性的神经网络辨识法,有利于直流发电机特性实验教学.     

Mechanical properties and thermal conductivity of pristine andfunctionalized carbon nanotube reinforced metallic glass composites:A molecular dynamics approach

This work uses the molecular dynamics approach to study the effects of functionalization of carbon nanotubes (CNTs) on the mechanical properties of Cu64Zr36 metallic glass (MG). Three types of functional groups, carboxylic, vinyl and ester were used. The effect of CNT volume fraction (Vf) and the number of functional groups attached to CNT, on the mechanical properties and thermal conductivity of CNT-MG composites was analysed using Biovia Materials Studio. At lower values of Vf (from 0 to 5％), the per-centage increase in Young's modulus was approximately 66％. As the value of Vf was increased further (from 5 to 12％), the rate of increase in Young's modulus was reduced to 16％. The thermal conductivity was found to increase from 1.52 W/mK at Vf=0％to 5.88 W/mK at Vf=12％, thus giving an increase of approximately 286％. Functionalization of SWCNT reduced the thermal conductivity of the SWCNT-MG composites.     

Effect of organo-modified montmorillonite nanoclay on mechanical,thermal and ablation behavior of carbon fiber/phenolic resin composites

The mechanical, thermal and ablation properties of carbon phenolic (C-Ph) composites (Type-I) rein-forced with different weight percentages of organo-modified montmorillonite (o-MMT) nanoclay have been studied experimentally. Ball milling was used to disperse different weight (wt) percentages (0, 1,2,4,6 wt.％) of nanoclay into phenolic resin. Viscosity changes to resin due to nanoclay was studied. On the other hand, nanoclay added phenolic matrix composites (Type-II) were prepared to study the dispersion of nanoclay in phenolic matrix by small angle X-ray scattering and thermal stability changes to the matrix by thermogravimetric analyser (TGA). This data was used to understand the mechanical, thermal and ablation properties of Type-I composites. Inter laminar shear strength (ILSS), flexural strength and flexural modulus of Type I composites increased by about 29％, 12％and 7％respectively at 2 wt.％ addition of nanoclay beyond which these properties decreased. This was attributed to reduced fiber volume fraction (％Vf) of Type-I composites due to nanoclay addition at such high loadings. Mass ablation rate of Type-I composites was evaluated using oxy acetylene torch test at low heat flux (125 W/cm2) and high heat flux levels (500 W/cm2). Mass ablation rates have increased at both flux levels marginally up to 2 wt.％ addition of nanoclay beyond which it has increased significantly. This is in contrast to increased thermal stability observed for Type-I and Type-Ⅱ composites up to 2 wt.％addition of nanoclay. Increased ablation rates due to nanoclay addition was attributed to higher insulation effi-ciency of nanolcay, which accumulates more heat energy in limited area behind the ablation front and self-propagating ablation mechanisms triggered by thermal decomposition of organic part of nanoclay.     

Improvement of VIS and IR camouflage properties by impregnating cotton fabric with PVB/IF-WS2

In order to examine the possibility to improve its camouflage properties standard cotton fabric with camouflage print was impregnated with poly(vinyl butyral), PVB and fullerene-like nanoparticles of tungsten disulfide, PVB/IF-WS₂. FTIR analysis excluded any possible chemical interaction of IF-WS₂ with PVB and the fabric. The camouflage behavior of the impregnated fabric has been examined firstly in the VIS part of the spectrum. Diffuse reflection, specular gloss and color coordinates were measured for three different shades (black, brown and dark green). Thermal imaging was applied to examine the camouflage abilities of this impregnation in IR part of the spectrum. The obtained results show that PVB/IF-WS₂ impregnation system induced enhacement of the materials camouflage properties, i.e. that IF-WS₂ have a positive effect on spectrophotometric characteristics of the fabric.     

An interface shear damage model of chromium coating/steel substrate under thermal erosion load

The Cr-plated coating inside a gun barrel can effectively improve the barrel's erosion resistance and thus increase the service life.However,due to the cyclic thermal load caused by high-temperature gun-powder,micro-element damage tends to occur within the Cr coating/steel substrate interface,leading to a gradual deterioration in macro-mechanical properties for the material in the related region.In order to mimic this cyclic thermal load and,thereby,study the thermal erosion behavior of the Cr coating on the barrel's inner wall,a laser emitter is utilized in the current study.With the help of in-situ tensile test and finite element simulation results,a shear stress distribution law of the Cr coating/steel substrate and a change law of the interface ultimate shear strength are identified.Studies have shown that the Cr coating/steel substrate interface's ultimate shear strength has a significant weakening effect due to increasing temperature.In this study,the interfacial ultimate shear strength decreases from 2.57 GPa(no erosion)to 1.02 GPa(laser power is 160 W).The data from this experiment is employed to establish a Cr coating/steel substrate interface shear damage model.And this model is used to predict the flaking process of Cr coating by finite element method.The simulation results show that the increase of coating crack spacing and coating thickness will increase the service life of gun barrel.     

热真空条件下工作的电气电缆载流量计算与试验

高空制导飞行器从母舱释放后,制导舱与仪器舱之间部分电气电缆处于热真空条件下工作。对此种特定条件下的电缆进行了载流量计算。理论计算表明,给定的电缆设计满足在热真空条件下正常工作要求。最后简略介绍了载流量试验。     

基于ANSYS的舰船武器装备基准变化分析方法

舰船武器装备基准在外界环境作用下产生变化,从而影响武器系统的打击精度。应用ANSYS平台建立舰船有限元模型,利用三维波浪载荷的计算方法模拟航行条件下的波浪力,研究了舰船甲板面武器装备基准在两种极限海况下的变化情况,发现针对此类舰船横摇使武器装备基准产生较大的变化,并且靠近尾部和两舷位置处装备的基准变化较为显著。仿真结果表明：当舰船在风浪中航行使用武器系统时,应尽量采取顶浪航行,减少舰船横摇对武器系统基准的影响。