JTIDS系统扩频码的优选及扩频图案的设计

首先介绍了联合战术信息分发系统(JTIDS)的一般概念,进而针对它的抗干扰措施———直接序列扩频的扩频码的优选及扩频图案的设计,提出了合适的算法,并用C语言在微机上仿真实现。实验结果证明优选的码字质量高,生成速度快,此方面的仿真实现逼近JTIDS,有利于对JTIDS进行深入研究,从而对它实施有效干扰。     

移动式雷达网的建立与优化

提出了移动式雷达网的概念和移动式雷达网的4种作战模式:环形模式、伞形模式、宽正面模式和纵深模式,对每种模式的优缺点进行了探讨。具体研究了宽正面移动式雷达网模式的优化问题,建立了相应的优化数学模型,并简单介绍了最优化模型的灵敏度分析问题。     

一种改进的混合BLISS多学科设计优化方法

针对BLISS 2000优化过程中权值系数的引入给实际应用带来的困难,提出一种改进的BLISS优化过程——混合BLISS( Hybrid BLISS,HBLISS).该方法在保持BLISS 2000的基本算法结构的基础上取消权值系数,利用耦合变量的最小残差协调子系统级和系统级优化,给出了HBLISS的算法结构和基本流程...     

Multi-objectives nonlinear structure optimization for actuator in trajectory correction fuze subject to high impact loadings

This paper presents an actuator used for the trajectory correction fuze, which is subject to high impact loadings during launch. A simulation method is carried out to obtain the peak-peak stress value of each component, from which the ball bearings are possible failures according to the results. Subsequently, three schemes against impact loadings, full-element deep groove ball bearing and integrated raceway, needle roller thrust bearing assembly, and gaskets are utilized for redesigning the actuator to effectively reduce the bearings' stress. However, multi-objectives optimization still needs to be conducted for the gaskets to decrease the stress value further to the yield stress. Four gasket's structure parameters and three bearings' peak-peak stress are served as the four optimization variables and three objectives, respectively. Optimized Latin hypercube design is used for generating sample points, and Kriging model selected according to estimation result can establish the relationship between the variables and objec-tives, representing the simulation which is time-consuming. Accordingly, two optimization algorithms work out the Pareto solutions, from which the best solutions are selected, and verified by the simulation to determine the gaskets optimized structure parameters. It can be concluded that the simulation and optimization method based on these components is effective and efficient.     

Multi-objective design optimization of composite submerged cylindrical pressure hull for minimum buoyancy and maximum buckling load capacity

This paper presents the design optimization of composite submersible cylindrical pressure hull subjected to 3 MPa hydrostatic pressure. The design optimization study is conducted for cross-ply layups [0s/90t/0u], [0s/90t/0u]s, [0s/90t]s and [90s/0t]s considering three uni-directional composites, i.e. Carbon/Epoxy, Glass/Epoxy, and Boron/Epoxy. The optimization study is performed by coupling a Multi-Objective Genetic Algorithm (MOGA) and Analytical Analysis. Minimizing the buoyancy factor and maximizing the buckling load factor are considered as the objectives of the optimization study. The objectives of the optimization are achieved under constraints on the Tsai-Wu, Tsai-Hill and Maximum Stress composite failure criteria and on buckling load factor. To verify the optimization approach, optimization of one particular layup configuration is also conducted in ANSYS with the same objectives and constraints.     

弹道修正弹系统效能灵敏度分析

灵敏度分析是武器系统效能分析中的一项重要内容,针对正交试验的不足,在分析了弹道修正弹系统效能的影响因素的基础上,建立了基于均匀设计的弹道修正弹系统效能的回归模型。通过对模型求导得到了命中概率对各参数的灵敏度表达式,并进行优化分析,得到了系统效能参数的最优组合以及最优区间,研究结果可作为弹道修正弹参数优化设计的依据。     

基于改进遗传算法的平流层飞艇定点悬停控制(英文)

平流层飞艇定点悬停控制是飞艇应用领域的关键技术。该控制问题可以转化为非线性多目标优化问题来求解。遗传算法是解决现代非线性多目标优化问题的一种重要方法。但是基本遗传算法在解决定点悬停飞艇实际控制问题时,具有易陷入局部最优解、在遗传进化过程中随机性较强、搜索效率低下及耗时多等缺陷。通过借鉴并行遗传算法、模拟退火算法和向量评价遗传算法的基本思想,在基本遗传操作中添加切断算子和拼接算子,设计一种改进遗传算法来改善上述缺陷。仿真结果表明该方法是有效可行的。     

C4ISR分布式信息融合系统拓扑结构设计

提出一种构造分布式信息融合系统的拓扑结构的新方法.首先,简要介绍了该问题的研究现状;然后,在对目前使用的网络结构进行深入分析的基础上,提出了基于多层de Bruijn网的分布式信息融合系统网络拓扑结构及其构造方法;最后讨论了上述网络结构的路由问题.     

键联接的优化设计及可靠性计算

用优化设计的方法建立了键联接的优化数学模型,并对键联接进行了可靠性分析。