二维约束点集Delaunay三角剖分算法研究

在已有算法基础上,提出了任意二维约束点集Delaunay三角剖分的新算法,算法仅在局部产生少量新点,并在局部对三角剖分进行修改,便可保证整体三角剖分符合Delaunay性质.     

Effect of silicon carbide and wire-mesh reinforcements in dissimilar grade aluminium explosive clad composites

Aluminium composites are inevitable in the manufacture of aircraft structural elements owing to less weight, superior corrosion resistance and higher specific properties. These composites reduce the weight of the aircraft, improve the fuel efficiency and enhance the maintenance duration. This study proposes the development of dissimilar grade aluminium (aluminium 1100-aluminium 5052) composites with different reinforcement’s viz., stainless steel wire-mesh, silicon carbide (SiC) powders and SiC powder interspersed wire-mesh, by explosive cladding technique. Wire-mesh enhances the friction and restricts the movement of flyer plate to craft a defect free clad, while SiC particles form a band on the interface. Highest strength is obtained when SiC powder interspersed wire mesh is employed as reinforcement. The dissimilar aluminium explosive clad with SiC particle reinforcement results in lower strength, which is higher than that of the weaker parent alloy and that of the conventional dissimilar aluminium explosive clads without any reinforcement.     

基于滑移网格的潜艇旋臂试验数值模拟?

潜艇水动力系数对潜艇操纵性研究具有重要意义。为了获取较高精度的潜艇旋转导数,以分区结构化网格为基础,采用基于固定坐标系的滑移网格方法,对SUBOFF潜艇进行旋臂试验数值仿真。并对比两种不同的湍流模型下仿真结果,误差均在8％以内,满足工程要求,验证了方法的可行性。     

Effect of wire tension on different output responses during wire electric discharge machining on AISI 304 stainless steel

WEDM is used in machining conductive materials where it is required to obtained complicated and intricate shapes with high accuracy. Various applications are in the field of automobile, medical industries, aerospace etc. WEDM is an economical machining option with short product development cycle. Surface roughness, kerf width, Material removal rate, Recast layer hardness and surface microhardness in WEDM are most important responses. In this paper, effect of varied Wire tension on SR, KW, MRR, RCL hardness and surface microhardness on AISI 304 have been investigated. Pulse on time, pulse off time, current and dielectric fluid are taken as fixed parameter. Results show that Wire tension influences the SR, MRR and Surface microhardness and has no effect on kerf width in case of Stainless steel 304.     

基于蛇怪蜥蜴踩水机理的仿生推进装置数值计算方法研究

为突破传统排水型两栖车辆“阻力墙”现象,提高两栖车辆水上航速,从蛇怪蜥蜴高速踏水机理出发,设计一种新型轮一叶复合式水上仿生推进装置,采用滑移网格和动网格方法对不同转速下的推进装置三维模型的动力学特性进行数值计算,并对仿真结果进行对比和分析．结果表明：滑移网格和动网格方法在计算结果上获得比较一致的结果,动网格方法更能反映模型的真实运动情况,而滑移网格方法在计算过程中表现出较好的稳定性,同时显著减少计算时间     

采用动网格技术的弹托分离仿真模型

针对一体化弹丸出炮口后弹托由与弹体接触到绕弹托质心做六自由度运动的过程,提出一种基于弹托分段分离运动并采用动网格技术耦合流体控制方程和六自由度运动方程的弹托分离仿真模型。以尾翼稳定脱壳穿甲弹为例,仿真分析不同马赫数下的弹托分离情况,并探讨弹托和弹体气动系数在分离过程中的变化情况。仿真结果表明:弹托分离马赫数越大,分离轨迹越靠近弹体且分离时间越短,但对地分离横向位移越大。通过与试验数据的对比,验证了所提弹托分离仿真模型的准确性。     

几何约束的改进弹性体网格变形方法研究及应用

针对现有弹性体网格变形方法无法有效抑制网格单元出现"负体积"和过度畸变等问题,引入体积弹性模量约束和挤压弹性模量约束,提出一种基于几何约束的改进弹性体法。借助Patrick网格质量参数,选取三维长方体边界在旋转、平移和伸展变形三种方式下的大幅度运动,对比研究引入几何约束后的改进效果。仿真计算二维NACA0012翼型的俯仰振荡和三维伸缩翼变形过程的气动特性,结果表明:基于几何约束的改进弹性体法显著提高了变形网格的鲁棒性,尤其在大变形时能够有效约束较差网格单元,改善经典方法存在的问题,可为非定常流场问题的求解提供有力支撑。     

螺栓法兰连接结构有限元模型参数确定方法

螺栓法兰连接广泛用于各种工业结构中,为准确预测该连接在实际工作中发挥的作用,需要建立准确高效的有限元模型。针对有限元建模过程中模型各种参数的确定问题,综合使用数值仿真手段和试验手段分别对模型网格参数和接触参数的确定开展研究。参数确定后的螺栓法兰连接结构有限元模型在保证计算精度的前提下,计算效率得到显著提高。     

差压式管道内检测机器人启动过程模拟仿真

基于CFD软件Fluent提供的计算方法,利用动网格技术和UDF(用户自定义函数),对差压式管道内检测机器人启动过程进行了动态模拟.该方法克服了以往静态研究的不足,更直观地反映了不同因素影响下机器人的启动情况.仿真结果表明:管内流体速度、机器人质量、管壁摩擦力、不同流体对机器人的启动过程都有明显影响.可为下一步研究机器...     

Quantifying optimal mesh and ring design costs

During the last decade telecommunication operators have been deploying WDM (Wavelength Division Multiplexing) technology to satisfy the exponential growth in global communication. While facilitating the advanced information society of today, this has also led to a higher dependency on the networks, and furthermore the high capacity utilization of optical fibers means that a single link failure will influence many users and enterprises. For these reasons, protection of network connections has become a major competitive parameter for the operators. Currently, the most popular protection method is ring protection, due to its simplicity, requiring only basic management functionality and operating with local restoration control. While many optical rings have been deployed, little work has been published on exactly what the cost of ring networks are, compared to general mesh networks. In this article we perform a quantitative comparison between ring protection and mesh protection, using real world network data and realistic prices for network components. Extending classic LP flow models to take rings and node costs into account, and using a link‐path based mesh network LP model, we are able to perform a total cost comparison of the two architectures, and of manual ring network design. The results suggest that the price of mesh network components must be reduced significantly to be competitive with ring based networks, and also that manual network design does not necessarily lead to the most cost‐efficient designs. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2005