Sr2FeNbO6的晶体结构

系统地研究了Sr2FeNbO6的晶体结构,并利用步进扫描的X光数据成功地确定了Sr2FeNbO6的晶体结构,利用Rietveld方法精修出Sr2FeNbO6是空间群为Pnma(62)的正交结构,其中,晶胞参数分别为a=5.616 1A,b=7.971 7A,c=5.613 0A.     

WINDOWS系统中的QoS保障机制研究

针对微软提出的常规服务质量(GeneralQualityofService,简称GQoS)的QoS解决方案,讨论了WINDOWS系统中的QoS保障机制。通过WINSOCK2的API函数设计程序,进行了Win98上的QoS性能测试。结果表明,在QoS启用的情况下,数据的传输时间和延迟抖动明显减小,说明WINDOWS系统中的QoS保障机制有效。     

海战场信息系统和武器系统综合仿真技术研究

本文分析了海战场信息系统仿真的特点,介绍了可以应用于海战场信息系统和武器系统综合仿真的高层体系结构(HLA)技术,描述了澳大利亚国防科学与技术组织(DSTO)基于HLA技术的虚拟舰艇概念和潜在的应用,以及虚拟舰艇结构和层次化联邦共同体概念的设计方法。     

Optimal inventory control policy for periodic‐review inventory systems with inventory‐level‐dependent demand

We consider a setting in which inventory plays both promotional and service roles; that is, higher inventories not only improve service levels but also stimulate demand by serving as a promotional tool (e.g., as the result of advertising effect by the enhanced product visibility). Specifically, we study the periodic‐review inventory systems in which the demand in each period is uncertain but increases with the inventory level. We investigate the multiperiod model with normal and expediting orders in each period, that is, any shortage will be met through emergency replenishment. Such a model takes the lost sales model as a special case. For the cases without and with fixed order costs, the optimal inventory replenishment policy is shown to be of the base‐stock type and of the (s,S) type, respectively. © 2012 Wiley Periodicals, Inc. Naval Research Logistics, 2012     

Partial equilibrium in risk‐based production decisions

Characteristically, a small subset of operational problems admit risk neutrality when contingent claims methodology were used in their analysis. That is, for the majority of manufacturing and production problems, operating cash flows are not directly linked to prices of traded assets. However, to the extent that correlations can be estimated, the methodology's applicability to a broader set of operational problems is supported. Our article addresses this issue with the objective of extending the use of contingent claims techniques to a larger set of operational problems. In broad terms, this objective entails a partial equilibrium approach to the problem of valuing uncertain cash flows. To this end, we assume risk aversion and cast our approach within Merton's intertemporal capital asset pricing model. In this context, we formulate a “generic” production valuation model that is framed as an exercise in stochastic optimal control. The model is versatile in its characterization and can easily be adapted to accommodate a wide‐ranging set of risk‐based operational problems where the underlying sources of uncertainty are not traded. To obtain results, the model is recast as a stochastic dynamic program to be solved numerically. The article addresses a number of fundamental issues in the analysis risk based decision problems in operations. First, in the approach provided, decisions are analyzed under a properly defined risk structure. Second, the process of analysis leads to suitably adjusted probability distributions through which, appropriately discounted expectations are derived. Third, through consolidating existing concepts into a standard and adaptable framework, we extend the applicability of contingent claims methodology to a broader set of operational problems. The approach is advantageous as it obviates the need for exogenously specifying utility functions or discount rates.© 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

组网雷达的改进粒子滤波算法

针对现代战争中有源雷达容易受到干扰和反辐射导弹的摧毁,以及无源雷达隐蔽性高,只能测量方位角度,测量精度小等特点,提出利用集中式有源雷达系统与无源雷达系统协同组网对目标进行跟踪。但是在实际环境中,噪声属性以及有源雷达,无源雷达接收信号的特点决定了组网雷达需要应用非线性滤波技术对信号进行处理。传统的非线性技术包括卡尔曼滤波、扩展卡尔曼滤波(EKF)或无迹卡尔曼滤波(UKF)等方法。非线性近似过程带来的误差相对较大,而且均要求观测噪声和过程噪声为独立或相关的高斯白噪声。而粒子滤波避免了传统非线性滤波方法的缺陷,但是存在粒子退化,于是用EKF和UKF在每一时刻更新粒子,用更新的粒子及其协方差构造重要性函数,然后重采样。仿真实验表明这两种改进粒子滤波方法有很好的效果。     

一种新型甲醛气体清除材料的实验研究

采用溶胶-凝胶法将纳米TiO2负载在活性碳纤维上,制备出一种新型甲醛气体清除材料。在制备中依次掺杂Fe3+和十二烷基苯磺酸钠(SDBS)对纳米TiO2进行改性,研究了纳米TiO2光催化活性的变化,并测试了自制材料的甲醛清除效率。结果表明:Fe3+和SDBS的添加不会改变纳米TiO2的晶型结构,但有利于晶粒的成长和负载膜的光催化活性;添加体积分数分别为0.8%的Fe3+和3%的SDBS时,材料的甲醛清除效率最高。     

损伤铝合金表面超声焊接界面断口分析与结合机理

采用超声焊接铝合金箔材的工艺修复处理表面腐蚀受损的2A12CZ基体,并利用Quanta200型环境扫描电子显微镜分析了截面形貌及箔材与基体之间界面表面断口的微观形貌。结果表明：从截面来看,箔材与基体之间大部分发生了焊合,界面分界线大部分消失;从机械脱开的界面断口来看,其表面微观形貌表现为鳞片状及韧窝状的典型金属型断口形貌。这说明在给定条件下,焊接部位大部分呈冶金结合。最后对铝台金箔材与铝合金基体之间超声焊接机理进行了探讨。     

舰载试验指挥控制系统研究与实践

针对靶场海上试验发展的综合需求,对舰载试验指挥控制系统发展的必要性及现状进行了分析,重点从与靶场其它系统的接口关系、系统功能、体系结构及软件设计几方面完成了系统总体设计研究,最后阐述了系统实现过程的关键技术。实践表明,该系统的应用大大提高了海上试验指挥水平。     

The effect of al particle size on thermal decomposition,mechanical strength and sensitivity of Al/ZrH2/PTFE composite

To study the thermal decomposition of Al/ZrH2/PTFE with different Al particle size as well as mechanical strength and impact sensitivity under medium and low strain rates, molding-vacuum sintering was adopted to prepare four groups of power materials and cylindrical specimens with different Al particle size. The active decomposition temperature of ZrH2 was obtained by TG-DSC, and the quasi-static me-chanics/reaction characteristics as well as the impact sensitivity of the specimen were studied respec-tively by quasi-static compression and drop-hammer test. The results show that the yield strength of the material decreased with the increase of the Al particle size, while the compressive strength, failure strain and toughness increased first and then decreased, which reached the maximum values of 116.61 MPa, 191％, and 119.9 MJ/m respectively when the Al particle size is 12—14μm because of particle size grading. The specimens with the highest strength and toughness formed circumferential open cracks and reacted partly when pressed. Those with developmental cracks formed inside did not react. It is considered that fracture of specimens first triggered initial reaction between Al and PTFE to release an amount of heat. Then ZrH2 was activated and decomposed, and participated in subsequent reaction to generate ZrC. The impact sensitivity of the specimens decreased with the increase of Al particle size.