几种排水型高性能船阻力性能对比研究

采用阻力理论计算方法,以高速圆舭艇的阻力性能为基准,对高速圆舭艇、深V型船、穿浪双体船以及高速三体船的阻力性能进行了对比研究,对比较结果进行了分析,给出了各船型的最适用航速范围.     

挠性航天器变幅值输入成形姿态机动策略

针对变参数挠性航天器的姿态机动问题,在变幅值零振动成形器的基础上,提出了鲁棒性较强的变幅值零振动和零微分成形器设计方法,设计了鲁棒姿态机动策略.该机动策略的控制目标是,将航天器机动到期望状态的同时,消除挠性结构的残余振动.以含转动挠性太阳翼的航天器进行三轴姿态机动为例,进行数值仿真.仿真结果表明,该机动策略对挠性结构频...     

一种新的装备配置优化模型

传统的装备配置优化问题一般采用确定性的数学规划方法解决,难以满足高技术条件下现代战争中需要对大量随机现象和模糊现象进行精确定量分析的实际要求。在分析了高技术条件下装备配置问题一般特性的基础上,根据机会约束规划和模糊机会约束规划的思想,提出了一种新的建立装备配置优化模型的思路和方法,并给出了基于随机模拟的遗传算法的实值算例,算例结果与实际情况基本相符,反映了模型的科学性与实用性。     

纯时滞三种群捕食系统持续生存与全局吸引性

研究了具有HollingⅡ功能性反应的纯时滞的两捕食者、一食饵生物系统,通过构造合理的Lyapunov函数讨论了系统的全局吸引性,并得到系统持续生存的充分条件。     

C4ISR/M&S互操作HLA仿真设施

基于仿真互操作标准组织(Simulation Interoperability Standards Organization,SISO)C4ISR/M&S互操作技术参考模型和高层体系结构(High Level Architecture,HLA),C4ISR/M&S互操作HLA仿真设施为架构仿真系统运行体系提出了面向方面框架(Aspect Oriented Framework,AOF)和应用服务平台的技术.AOF能控制C4ISR/M&S互操作所引起的仿真系统结构复杂化,应用服务平台则能丰富仿真系统的运行环境,仿真设施可作为仿真系统通用运行体系的基础组件,支持复杂互操作系统开发.     

压力板仪配套及SWCC试验的若干问题探讨

采用高压氮气瓶、压力控制箱及精密电子天平等器件,对从美国土壤水分仪器公司进口的压力板仪核心部件进行了配套完善。介绍了配套后的压力板仪土-水特征曲线测试系统的结构组成与特点,对土-水特征曲线(SWCC)试验过程中应注意的问题进行了剖析。用配套的压力板仪测定了宁夏原状自重湿陷性黄土、北京原状粉质粘土和小浪底防渗斜墙重塑黄土类壤土等3种土样的土-水特征曲线,并对试验结果进行了分析。     

Electronic warfare in the optical band: Main features,examples and selected measurement data

The paper presents the possibilities of, and methods for, acquiring, analysing and processing optical signals in order to recognise, identify and counteract threats on the contemporary battleground. The main ways electronic warfare is waged in the optical band of the electromagnetic wave spectrum have been formulated, including the acquisition of optical emitter signatures, as well as ultraviolet (UV) and thermal (IR) signatures. The physical parameters and values describing the emission of laser radiation are discussed, including their importance in terms of creating optical signatures. Moreover, it has been shown that in the transformation of optical signals into signatures, only their spectral and temporal parameters can be applied. This was confirmed in experimental part of the paper, which includes our own measurements of spectral and temporal emission characteristics for three types of binocular laser rangefinders. It has been further shown that through simple registration and quick analysis involving comparison of emission time parameters in the case of UV signatures in “solar-blind” band, various events can be identified quickly and faultlessly. The same is true for IR signatures, where the amplitudes of the recorded signal for several wavelengths are compared. This was confirmed experimentally for UV signatures by registering and then analyzing signals from several events during military exercises at a training ground, namely Rocket Propelled Grenade (RPG) launches and explosions after hitting targets, trinitrotoluene (TNT) explosions, firing armour-piercing, fin-stabilised, discarding sabots (APFSDS) or high explosive (HE) projectiles. The final section describes a proposed model database of emitters, created as a result of analysing and transforming the recorded signals into optical signatures.     

An efficient SPH methodology for modelling mechanical characteristics of particulate composites

Particulate composites are one of the widely used materials in producing numerous state-of-the-art components in biomedical, automobile, aerospace including defence technology. Variety of modelling techniques have been adopted in the past to model mechanical behaviour of particulate composites. Due to their favourable properties, particle-based methods provide a convenient platform to model failure or fracture of these composites. Smooth particle hydrodynamics (SPH) is one of such methods which demonstrate excellent potential for modelling failure or fracture of particulate composites in a Lagrangian setting. One of the major challenges in using SPH method for modelling composite materials depends on accurate and efficient way to treat interface and boundary conditions. In this paper, a master-slave method based multi-freedom constraints is proposed to impose essential boundary conditions and interfacial displacement constraints in modelling mechanical behaviour of composite materials using SPH method. The proposed methodology enforces the above constraints more accurately and requires only smaller condition number for system stiffness matrix than the procedures based on typical penalty function approach. A minimum cut-off value-based error criteria is employed to improve the compu-tational efficiency of the proposed methodology. In addition, the proposed method is further enhanced by adopting a modified numerical interpolation scheme along the boundary to increase the accuracy and computational efficiency. The numerical examples demonstrate that the proposed master-slave approach yields better accuracy in enforcing displacement constraints and requires approximately the same computational time as that of penalty method.     

Bending and stress analysis of polymeric composite plates reinforced with functionally graded graphene platelets based on sinusoidal shear-deformation plate theory

The bending and stress analysis of a functionally graded polymer composite plate reinforced with gra-phene platelets are studied in this paper. The governing equations are derived by using principle of virtual work for a plate which is rested on Pasternak's foundation. Sinusoidal shear deformation theory is used to describe displacementfield. Four different distribution patterns are employed in our analysis. The analytical solution is presented for a functionally graded plate to investigate the influence of important parameters. The numerical results are presented to show the deflection and stress results of the problem for four employed patterns in terms of geometric parameters such as number of layers, weight fraction and two parameters of Pasternak's foundation.     

The mechanism of liquid dispersing from a cylinder driven by central dynamic shock loading

A systematic investigation on the mechanism of dynamic liquid dispersing process via theoretical and experimental approach is presented. The experiments include weak and strong constrained scenarios using the high-speed camera technique and the flash X-ray radiography technique. Based on dynamic analysis, one-dimensional characteristics analysis and some numerical simulations on the propagating processes of blast waves before the container shell rupturing, further and detailed analyses of the experimental results are presented. The effects of the liquid viscosity on the dynamic dispersing flow are also analyzed, and the spall fracture mechanism is explored. Thus, the dominating forces determining the dispersing liquid flow are revealed, that is, the stretching and shearing action due to the interaction of two reflecting rarefaction waves in opposite propagating directions. The influence of container shell strength on the dispersing liquid flow is also investigated, and the characters of cavitation layered in liquid before shell rupturing are uncovered. Results revealed that different shell material results in different cavitating layers. Then the different cavitating layers drive the different dynamic liquid dispersing process coming into being. The metastable liquid states caused by pressure drop and cavi-tation generation are discussed.