可靠度限制下相控阵雷达天线阵面T/R单元维修模型

为了描述维修活动对相控阵雷达天线阵面系统的影响,构建了以可靠度为基础的“修旧不如新”定期维修优化模型。对相控阵雷达T/R单元失效下的天线性能参数进行分析,根据指标确定系统不能正常工作的失效T/R单元阈值; 针对大部分维修活动都难以使T/R单元修复如新的事实,引入失效率递增因子,在系统一定的可靠度水平上,以相控阵雷达系统的使用可用度和维修费用率为优化决策参数,建立了系统的维修优化模型,并运用边际效能算法对系统的最佳预防换件维修周期和换件维修组数量进行求解。实例运算结果表明,该模型突破了已有模型“修旧如新”的限制条件,更符合实际,能为维修策略的制定提供理论依据。     

Some new results on the preservation of the NBUE and NWUE aging classes under the formation of coherent systems

We consider the classical problem of whether certain classes of lifetime distributions are preserved under the formation of coherent systems. Under the assumption of independent and identically distributed (i.i.d.) component lifetimes, we consider the NBUE (new better than used in expectation) and NWUE (new worse than used in expectation) classes. First, a necessary condition for a coherent system to preserve the NBUE class is given. Sufficient conditions are then obtained for systems satisfying this necessary condition. The sufficient conditions are satisfied for a collection of systems which includes all parallel systems, but the collection is shown to be strictly larger. We also prove that no coherent system preserves the NWUE class. As byproducts of our study, we obtain the following results for the case of i.i.d. component lifetimes: (a) the DFR (decreasing failure rate) class is preserved by no coherent systems other than series systems, and (b) the IMRL (increasing mean residual life) class is not preserved by any coherent systems. Generalizations to the case of dependent component lifetimes are briefly discussed.     

基于故障树分析的航空装备体系结构贡献率评估方法

针对航空装备体系构成复杂的特点,将故障树分析引入航空装备体系结构贡献率评估问题,提出基于故障树分析的评估方法.从作战装备、信息支援装备和保障装备三个方面构建航空装备体系结构,建造航空装备体系结构故障树;采用底事件的关键重要度指标来计算航空装备的体系结构贡献率,建立基于关键重要度的航空装备体系结构贡献率评估模型;以某航空...     

Phenomenological modelling of flow behaviour of 20MnMoNi55 reactor pressure vessel steel at cryogenic temperature with different strain rates

In the present study a phenomenological constitutive model is developed to describe the flow behaviour of 20MnMoNi55 low carbon reactor pressure vessel (RPV) steel at sub-zero temperature under different strain rates. A set of uniaxial tensile tests is done with the variation of strain rates and temperature ranging from 10⁻⁴ s⁻¹ to 10⁻¹ s⁻¹ and -80 °C to −140 °C respectively. From the experimental data, family of flow curves at different temperatures and strain rates are generated and fitted exponentially. The strain rate and temperature dependence of the coefficients of the exponential flow curves are extracted from these curves and characterised through a general phenomenological constitutive coupled equation. The coefficients of this coupled equation are optimised using genetic algorithm. Finite element simulation of tensile tests at different strain rates and temperatures are done using this coupled equation in material model of Abaqus FEA software and validated with experimental results. The novelties of proposed model are: (a) it can predict precisely the flow behaviour of tensile tests (b) it is a simple form of equation where fitting parameters are both function of strain rate ratio and temperature ratio, (c) it has ability to characterize flow behaviour with decreasing subzero temperatures and increasing strain rates.     

Flow computations past a triangular boattailed projectile

This paper presents a computational study of the air flow past a triangular boattailed projectile. The study shows that there is a single normal shock wave impinges the projectile at transonic speeds. At supersonic speeds, the formed shock waves are smeared compared to a conical boattailed projectile. Also, there is a reduction of the wake region behind the triangular base and the rear stagnation point is nearer to the projectile base resulting in base drag reduction. Moreover, there is an improvement of the stability of the triangular boattailed projectile since a lower overturning moment is incurred.     

室内装饰织物燃烧特性研究

室内装饰织物因其容易点燃、燃烧速度快、蔓延迅速等燃烧特性,对室内火灾的发展蔓延及火灾危害都有重要影响。运用锥形量热仪对棉麻、涤纶、帆布、泡纱、条绒等5种室内装饰织物的燃烧性能进行了实验研究,测量了室内装饰织物在不同热辐射条件下的燃烧特性,并对实验数据进行图像拟合,通过具体的实验数据和图像分析比较了5种室内装饰织物在不同热辐射条件下的点燃时间、热释放速率、质量损失速率、比消光面积及CO生成量。最后得出了各种织物的火灾危险性相对大小。     

西藏与内地古建筑常用木材燃烧特性对比研究

为研究西藏高海拔条件对古建筑火灾的影响,分别在拉萨与廊坊进行了中等规模木垛燃烧实验。测得了木垛燃烧的质量损失速率、火焰高度和燃烧温度,并分析了空气中氧气含量和大气压力对木垛引燃和燃烧的影响。实验表明：在拉萨低气压条件下,木垛引燃难度加大、燃烧时间增加、质量损失速率降低、木垛中心温度降低。     

《秦腔》—乡土世界的还原与抽象

鉴于读者和评论界对《秦腔》不同的解读和评价,本文以详实的文本分析为依据,系统论述了《秦腔》针对转型期的乡土世界所进行的还原和抽象的具体内涵。通过剖析被作家称之为＂密实的流年式＂叙写模式的具体特征和解读作品所塑造的一系列艺术形象的特殊意义,高度评价了作家对乡土生活深刻的认知以及在小说叙事方法上所进行的革命性探索。另外,本文所涉及关于贾平凹创作实践的论述,对于广大文艺工作者重新审视艺术创作与社会生活之间的关系具有较强的指导作用。     

一类半线性抛物型方程组解的爆破速率估计

研究了一类具有不同类型反应项的半非线性抛物型方程组初边值问题,这类模型主要描述两种物质燃烧过程中的热传递规律。通过运用古典计算技巧和偏微分方程的定性分析手法,得到了这类半非线性抛物型方程组初边值问题解的爆破速率估计。     

压电材料中的共线非等长多裂纹问题

建立了横观各向同性压电材料中的共线非等长多裂纹模型。将裂纹模拟为连续分布的广义位错,推导了单点广义位错的格林函数,并基于此得到了共线非等长多裂纹的奇异积分方程组,最后由数值计算给出了裂纹尖端的能量释放率。对奇异积分方程组的退化分析和对称条件下的数值结果的讨论,验证了本文结果的正确性。研究表明:当共线裂纹间距小于裂纹长度时,裂纹尖端场存在显著的干涉效应;裂纹越长,干涉效应越显著;电载荷系数越大,能量释放率也越大;相对于外侧尖端而言,共线裂纹内侧尖端对电载荷系数更为敏感。