连续波强激光武器动态毁伤概率的非毁检测法

给出一种强激光武器与目标存在相对运动时的毁伤概率(动态毁伤概率)在非致毁条件下的检测方法。该方法是在已知强激光对目标的致毁时间、一次发射时间的基础上,在武器的跟瞄子系统对目标无毁的跟踪试验中,通过检测跟踪误差在射击门内外交替出现的时间间隔,给出动态毁伤概率的点估计,以及在既定置信度下,动态毁伤概率的置信区间,同时还能判断所测毁伤概率是否处于最佳状态,为进一步优化动态毁伤概率提供依据。     

基于圆柱体缺陷构件的超声探伤重构研究

圆柱体构件中非轴对称人造缺陷偏心圆孔的超声探伤一直是无损检测的难点。基于脉冲反射原理设计超声实验平台,根据检测回波信号判定偏心圆孔缺陷所呈现的特征。在实验研究基础上,针对声场在圆柱体工件内部的传播情况,根据惠更斯原理以圆柱体为发射声源,基于k-wave仿真工具箱建立仿真平台,并利用声学传感器接收声波信号,设计的仿真平台能够实现360°同时刻采集工件的发射信号,同时利用传播过程中声压强弱的变化构建声场模型。根据采集的信号采用逆时反演重构模型,直观可视化地重构了内部缺陷的位置形状信息。     

弹丸动平衡自动测试方法研究

采用 IBM- PC机为主机 ,对弹丸动不平衡量 (m1 ,m2 )及相位角α进行自动测试并做相应的数据处理。设计了弹丸左、右两标定面的平面分离电路、A/D转换电路等。     

Estimating distribution functions from partially observed samples

Suppose that some components are initially operated in a certain condition and then switched to operating in a different condition. Working hours of the components in condition 1 and condition 2 are respectively observed. Of interest is the lifetime distribution F of the component in the second condition only, i.e., the distribution without the prior exposure to the first condition. In this paper, we propose a method to transform the lifetime obtained in condition 1 to an equivalent lifetime in condition 2 and then use the transformed data to estimate F. Both parametric and nonparametric approaches each with complete and censored data are discussed. Numerical studies are presented to investigate the performance of the method. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 521–530, 2000     

A nonparametric approach to accelerated life testing under multiple stresses

Accelerated life testing (ALT) is concerned with subjecting items to a series of stresses at several levels higher than those experienced under normal conditions so as to obtain the lifetime distribution of items under normal levels. A parametric approach to this problem requires two assumptions. First, the lifetime of an item is assumed to have the same distribution under all stress levels, that is, a change of stress level does not change the shape of the life distribution but changes only its scale. Second, a functional relationship is assumed between the parameters of the life distribution and the accelerating stresses. A nonparametric approach, on the other hand, assumes a functional relationship between the life distribution functions at the accelerated and nonaccelerated stress levels without making any assumptions on the forms of the distribution functions. In this paper, we treat the problem nonparametrically. In particular, we extend the methods of Shaked, Zimmer, and Ball [7] and Strelec and Viertl [8] and develop a nonparametric estimation procedure for a version of the generalized Arrhenius model with two stress variables assuming a linear acceleration function. We obtain consistent estimates as well as confidence intervals of the parameters of the life distribution under normal stress level and compare our nonparametric method with parametric methods assuming exponential, Weibull and lognormal life distributions using both real life and simulated data. © 1998 John Wiley & Sons, Inc. Naval Research Logistics 45: 629–644, 1998     

Global planning of accelerated degradation tests based on exponential dispersion degradation models

The accelerated degradation test (ADT) is an efficient tool for assessing the lifetime information of highly reliable products. However, conducting an ADT is very expensive. Therefore, how to conduct a cost-constrained ADT plan is a great challenging issue for reliability analysts. By taking the experimental cost into consideration, this paper proposes a semi-analytical procedure to determine the total sample size, testing stress levels, the measurement frequencies, and the number of measurements (within a degradation path) globally under a class of exponential dispersion degradation models. The proposed method is also extended to determine the global planning of a three-level compromise plan. The advantage of the proposed method not only provides better design insights for conducting an ADT plan, but also provides an efficient algorithm to obtain a cost-constrained ADT plan, compared with conventional optimal plans by grid search algorithms.     

温度对半导体激光器退化的影响

采取等效电路模型仿真和加速退化试验相结合的方法研究温度对半导体激光器不同退化模式的影响规律。针对半导体激光器有源区退化和腔面退化进行分析,发现有源区退化会使半导体激光器阈值电流增大,而腔面退化会使半导体激光器斜率效率减小;进行了半导体激光器热特性建模与仿真,发现温度升高会使半导体激光器阈值电流增大;利用半导体激光器加速退化试验平台进行了半导体激光器加速退化试验。仿真与试验结果证明:温度升高会加剧半导体激光器腔面退化,而对有源区退化无显著影响。上述结论对进一步完善半导体激光器温度-退化仿真模型,研究温度对半导体激光器退化的作用机理和防护措施有积极作用。     

矿物掺合料对GRC耐久性的影响

通过长达3年的标准养护试验及80℃热水加速老化试验,研究了矿物掺合料粉煤灰、硅灰对耐碱玻璃纤维增强普通硅酸盐水泥(GRC)耐久性的影响,并对矿物掺合料改善GRC耐久性的机理作了初步分析探讨。研究结果表明,粉煤灰和硅灰矿物掺合料可明显改善GRC的长期耐久性。     

蓄电池在线检测方法研究

在对阀控铅酸蓄电池的性能指标、失效机理、检测方法研究的基础上,通过比较各种检测方法,提出了一种新的蓄电池内阻在线检测方法——四线两端法,阐述了四线两端法的测试原理,给出了该方法在蓄电池在线检测中的检测步骤,同时分析了影响测量精度的主要因素,提出了提高测量精度所采取的措施,并给出系统测量误差。     

微波辐射Fenton反应降解罗丹明B研究

Fenton试剂在降解有机污染物方面具有无二次污染等优势,但由于存在降解速率较慢的缺陷,在工程实践中尚未得以推广应用。考虑到微波具有促进有机化学反应速率的功能,采用微波和Fenton试剂联合作用氧化降解罗丹明B,对降解罗丹明B的优化实验条件进行了研究。首先研究了单一因素对降解效果的影响,然后对各种因素的综合作用效果进行了分析,得出了降解的优化实验条件。研究表明,微波能有效促进罗丹明B的降解脱色,而且能大大缩短反应时间,降低反应成本,增强Fenton氧化反应的活性,提高降解效果。