目标识别跟踪系统的图像收集处理软件流程设计

详细介绍了目标识别跟踪系统中图像收集处理软件的设计流程。首先介绍了目标识别跟踪系统,然后从视频图像显示到目标图像获取和发送的整个流程进行详细阐述,并针对流程节点中获取目标图像的两种方式加以深入研究。     

基于视频监控的人的异常行为系统设计

"视频监控"是一种可实现夜间检测的视频监控系统,普遍用于沿街商铺、仓库、郊区独户别墅以及小区等场所。传统的视频监控对摄像头的要求较高,并且需要多人值守,对人力、财力的要求较高。针对传统视频监控存在的不足,设计了一种智能检测系统,能实现对非法入侵、物品盗移等异常状况的实时检测和及时报警,还针对夜间图像的特点设计增强算法,使普通摄像头可实现夜间监控,大大降低了视频监控的应用成本并提高了监控效率。     

像管电子光学系统多目标优化的研究

将多重网格法用于静电像管电子光学场分布计算,采用改进的约束变尺度法进行静电聚焦像管的优化设计,较大地提高了电场分布的计算精度和像管设计效率,减少了计算时间和设计周期。研究的加权最小二乘法构造优化计算的多目标函数,普遍适用于调焦、定焦、变倍、选通和校畸变等各种类型静电像管的设计与计算。     

Background dominant colors extraction method based on color image quick fuzzy c-means clustering algorithm

A quick and accurate extraction of dominant colors of background images is the basis of adaptive camouflage design. This paper proposes a Color Image Quick Fuzzy C-Means (CIQFCM) clustering algorithm based on clustering spatial mapping. First, the clustering sample space was mapped from the image pixels to the quantized color space, and several methods were adopted to compress the amount of clustering samples. Then, an improved pedigree clustering algorithm was applied to obtain the initial class centers. Finally, CIQFCM clustering algorithm was used for quick extraction of dominant colors of background image. After theoretical analysis of the effect and efficiency of the CIQFCM algorithm, several experiments were carried out to discuss the selection of proper quantization intervals and to verify the effect and efficiency of the CIQFCM algorithm. The results indicated that the value of quantization intervals should be set to 4, and the proposed algorithm could improve the clustering efficiency while maintaining the clustering effect. In addition, as the image size increased from 128 × 128 to 1024 × 1024, the efficiency improvement of CIQFCM algorithm was increased from 6.44 times to 36.42 times, which demonstrated the significant advantage of CIQFCM algorithm in dominant colors extraction of large-size images.     

克服多路径效应的自适应偏轴跟踪方法

在已有的偏轴跟踪方法的基础上,利用海情、目标距离、正交分量的误差电压及其变化,自适应地进行偏轴跟踪,以达到用普通单脉冲雷达精确地跟踪超低空飞行海上目标的目的.     

Investigation on the spatial distribution characteristics of behind-armor debris formed by the perforation of EFP through steel target

The behind-armor debris (BAD) formed by the perforation of an EFP is the main damage factor for the secondary destruction to the behind-armor components. Aiming at investigating the BAD caused by EFP, flash X-ray radiography combined with an experimental witness plate test method was used, and the FEM-SPH adaptive conversion algorithm in LS-DYNA software was employed to model the perforation process. The simulation results of the debris cloud shape and number of debris were in good agreement with the flash X-ray radiographs and perforated holes on the witness plate, respectively. Three-dimensional numerical simulations of EFP's penetration under various impact conditions were conducted. The results show that, an ellipsoidal debris cloud, with the major-to-minor axis radio (a/b) smaller than that caused by shaped charge jets, was formed behind the target. With the increase of target thickness (h) and decrease of impact velocity (v₀) and obliquity (θ), the value of a/b decreases. The number of debris ejected from target is significantly higher than that from EFP. Based on the statistical analysis of the spatial distribution of the BAD, An engineering calculation model was established considering the influence of h, v₀ and θ. The model can with reasonable accuracy predict the quantity and velocity distribution characteristics of BAD formed by EFP.     

自适应调制的MIMO OFDM系统的性能分析

分析了MIMO OFDM的系统模型,研究了MIMO OFDM系统的自适应调制技术,给出了完整的自适应算法,探讨了自适应MIMO OFDM系统的频谱效率。仿真结果表明,自适应调制提高了MIMO OFDM的误比特率性能。     

Linux下某型制导弹目标跟踪并行算法

针对某型电视制导弹的图像特点,在Linux平台上设计了一种并行算法用于完成目标跟踪.算法思想:将制导弹的目标跟踪任务划分为图像采集、纠旋、显示和目标跟踪,程序中创建两个线程用于完成该任务;其中线程1完成图像采集、纠旋和显示;线程2完成目标跟踪.实验表明该算法实现了Linux环境下图像的实时采集、纠旋、显示和目标跟踪,与Windows下的目标跟踪算法相比,该算法有效的节省了资源.     

可靠性强化试验通用夹具研究

针对可靠性强化试验中全轴随机振动试验的通用夹具问题展开研究,首先提出了基于全轴随机振动环境多轴非比例加载、非高斯幅值分布、宽频带等特性的全新夹具设计要求,然后通过理论分析得出了夹具设计的一般原则,最后设计实现了一种可靠性强化试验通用夹具,并对该夹具进行了测试验证.全轴随机振动试验的夹具设计是可靠性强化试验在工程应用中的关键技术,该文的研究可以为可靠性强化试验的推广应用提供广泛借鉴.     

基于IRT的自适应学习管理系统设计

从新一代网络教育标准体系的架构入手,结合学习管理系统标准,提出了用标准格式绑定学习单元的方法,并且结合项目反应理论,实现了自适应学习管理和跟踪。标准化的结构设计有利于教育资源在不同系统间的交互、共享和重用,而自适应的学习跟踪使得远程网络教育过程更符合人的学习规律,能够有效地提高学习效率.