导弹舵机MIT-Lyapunov复合控制研究

建立了导弹舵机系统的数学模型,提出了模糊自适应控制分配与复合控制器设计方案,使采用MIT-Lyapunov复合控制方法设计的控制器能够克服导弹舵机系统在导弹飞行范围发生大的变化时,舵机参数剧烈变化带来的影响。最后利用Matlab/Simulink对舵机系统进行了仿真分析。仿真结果表明:该控制器能够解决舵机在参数发生变化后控制效果变差的问题,使舵机系统具有较好的稳定性和快速响应性。     

导弹俯仰通道制导控制一体化设计

根据弹目相对运动关系及导弹系统模型,建立了导弹俯仰通道制导控制一体化模型。利用反馈线性化方法将该模型转化成为可控线性系统,基于自适应反演控制方法设计了控制器对转换后的系统进行控制。仿真结果表明,制导控制一体化设计能够有效减小导弹脱靶量,缩短导弹系统响应时间。     

一种新的小波收缩统一阈值函数

提出一种新的小波收缩统一阈值函数,并证明了新阈值函数具有收敛性,通过调节可变参数的取值可以改变新阈值函数的趋向,为图像阈值去噪的自适应处理提供了可能.此外,给出了新阈值函数的期望、方差与风险的关系式.仿真结果表明新阈值函数不仅能有效去除噪声,而且比两种经典的阈值函数有更高的灵活性,可以获得更高的信噪比和更好的视觉效果.     

基于改进多模滤波算法的控制系统故障诊断

应用分层多模自适应滤波算法对控制系统的故障进行诊断时,只能识别出故障的类型,如识别出是传感器还是执行器发生故障,并不能判定出故障的大小.提出一种改进分层多模自适应滤波算法,应用此算法可使分层多模自适应滤波算法不仅可以检测出控制系统的故障类型,而且能够确定发生故障的执行器局部故障程度.将此算法应用于某无人机控制系统的故障诊断,仿真结果验证了该方法的有效性.     

Optimal control of an M/G/1 queue with impatient priority customers

An optimal operating policy is characterized for the infinite‐horizon average‐cost case of a single server queueing control problem. The server may be turned on at arrival epochs or off at departure epochs. Two classes of customers, each of them arriving according to an independent Poisson processes, are considered. An arriving 1‐customer enters the system if the server is turned on upon his arrival, or if the server is on and idle. In the former case, the 1‐customer is selected for service ahead of those customers waiting in the system; otherwise he leaves the system immediately. 2‐Customers remain in the system until they complete their service requirements. Under a linear cost structure, this paper shows that a stationary optimal policy exists such that either (1) leaves the server on at all times, or (2) turns the server off when the system is empty. In the latter case, we show that the stationary optimal policy is a threshold strategy, this feature being commonplace in most of priority queueing systems and inventory models. However, the optimal policy in our model is determined by two thresholds instead of one. © 2001 John Wiley & Sons, Inc. Naval Research Logistics 48: 201–209, 2001     

非线性干扰观测器的高超声速飞行器自适应反演控制

针对高超声速飞行器参数不确定弹性体模型,提出了一种基于非线性干扰观测器的自适应反演控制器设计方法。将曲线拟合模型表示为严格反馈形式,采用反演方法设计控制器。采用动态面方法获取虚拟控制量的导数,避免了传统反演控制"微分项膨胀"问题。为了增强控制器的鲁棒性,基于二阶跟踪-微分器设计了一种新型非线性干扰观测器,以此对模型不确定项进行自适应估计和补偿。仿真结果表明,控制器对模型不确定性和气动弹性影响具有强鲁棒性,且能实现对速度和高度参考指令的稳定跟踪。     

Determining a threshold control policy for an imperfect production system with rework jobs

Consider a threshold control policy for an imperfect production system with only a work center handling both regular and rework jobs. An imperfect production system studied here, generates defect jobs by factors other than machine failures. A threshold control or (ω, s) policy sets the guideline for a work center to switch between regular and rework jobs. A production cycle begins with loading and processing of several batches of regular jobs with a lot size equal to s. The outcome of each completed regular job is an independent Bernoulli trial with three possibilities: good, rework, or scrap. Once the work center accumulates more than a threshold ω of rework jobs, it finishes the last batch of regular jobs and switches to rework jobs. The objective of this research is to find a threshold ω and a lot size s that maximize the average long‐term profit. The ultimate goal is to construct a simple algorithm to search for ω and s that can be implemented directly in production management systems, as a result of this work. © 1999 John Wiley & Sons, Inc. Naval Research Logistics 46: 273–301, 1999     

一种新的Kronecker扩频码在盲多用户检测中的应用

当直接序列(DS-CDMA)系统中的多址干扰非常强时,自适应的盲多用户检测的性能将会严重下降.为了解决这一问题,一般的做法是增加系统的扩频增益,但是其取得的效果是有限的.本文将一种新的克罗内克(Kronecker)扩频序列应用到盲多用户检测中,该序列通过普通的扩频序列对自身作Kronecker乘积而生成.理论分析和仿真...     

基于RLS算法的自适应逆控制系统的研究

提出了一种基于RLS算法的自适应逆控制系统,并对最小相位对象和非最小相位对象分别用此系统建模,进行仿真研究.仿真结果表明,基于RLS算法的自适应逆控制系统的收敛速度快,抗干扰性能好,而且得到的稳态误差较小.     

二值化联合变换相关器识别复杂背景目标时的阈值选取

讨论了利用二值化联合变换相关器对复杂背景目标进行相关识别的阈值选取问题。由于不同阈值对二值化联合变换相关器识别结果有很大的影响,阈值过高,会损失过多的联合变换功率谱中的有效成份,使相关峰减弱;阈值过低,会使联合功率谱中的噪声放大,相关峰可能被淹没在噪声之中。因而存在一个最佳阈值。实验表明,最佳阈值位于联合功率谱最大灰度值的40%～50%之间,在此阈值范围内,相关峰值较高,噪声也得到有效抑制。