中小型舰艇设置轻型复合装甲的作用及爆炸破片的杀伤威力计算

简要论述了先进防弹复合材料在舰艇装甲防护中的应用 ,针对中小型舰艇设置轻型复合装甲的目的 ,进一步论证分析了舰艇轻型复合装甲的防御目标和防护部位 ,并结合典型防御目标———导弹爆炸破片的杀伤威力进行了计算分析     

Effects of jute fibre content on the mechanical and dynamic mechanical properties of the composites in structural applications

Due to notable characteristics, sustainability concept and environmental issues, hybridisation natural with synthetic fibres to fabricate composites have been rapidly gaining market share in different applications (structural, military, aerospace and automotive vehicles). Compression, tension and fatigue tests of various stacking sequences of plain jute/carbon reinforced (PVB) polyvinyl butyral by hot hydraulic press technique were experimentally conducted. Six types of fabricated composites with various constituents (jute, carbon and their hybrids) were fabricated and tested. Notably, fatigue lifetime of hybrids increases with increasing the carbon content relative to the jute fibre content. On the other hand, Jute composites possess high strain compared to pure carbon composite, which gives an overall improvement in mechanical behaviours. Interestingly, H1 hybrid with Carbon/Jute/Carbon sequences offers similar fatigue stiffness behaviour of H3 hybrid with Carbon/Jute/Carbon/Jute sequences when subjected to cyclic loading. Carbon composite (C) exhibited the highest fatigue resistance, whiles jute composite (J) possessed the highest strain and semi brittle trends in both mechanical and fatigue performance. Results concluded that plain jute fibres could partially replace high-cost synthetic carbon fibres to produce more eco-friendly hybrids to be utilised in different composites industries.     

Effect of tool rotational speed on the particle distribution in friction stir welding of AA6092/17.5 SiCp-T6 composite plates and its consequences on the mechanical property of the joint

This study investigates the effect of tool rotational speed (TRS) on particle distribution in nugget zone (NZ) through quantitative approach and its consequences on the mechanical property of friction stir welded joints of AA6092/17.5 SiC_p-T6 composite. 6 mm thick plates are welded at a constant tool tilt angle of 2° and tool traverse speed of 1 mm/s by varying the TRS at 1000 rpm, 1500 rpm and 2000 rpm with a taper pin profiled tool. Microstructure analysis shows large quantity of uniformly shaped smaller size SiC particle with lower average particle area which are homogeneously distributed in the NZ. The fragmentation of bigger size particles has been observed because of abrading action of the hard tool and resulting shearing effect and severe stress generation due to the rotation of tool. The particles occupy maximum area in the matrix compared to that of the base material (BM) due to the redistribution of broken particles as an effect of TRS. The migration of particles towards the TMAZ-NZ transition zone has been also encountered at higher TRS (2000 rpm). The microhardness analysis depicts variation in average hardness from top to bottom of the NZ, minimum for 1500 rpm and maximum for 2000 rpm. The impact strength at 1000 rpm and 1500 rpm remains close to that of BM (21.6 J) while 2000 rpm shows the accountable reduction. The maximum joint efficiency has been achieved at 1500 rpm (84%) and minimum at 1000 rpm (68%) under tensile loading. Fractographic analysis shows mixed mode of failure for BM, 1000 rpm and 1500 rpm, whereas 2000 rpm shows the brittle mode of failure.     

高重频双波长复合干扰激光器设计

为解决基频光高重频与倍频光高平均功率之间的矛盾,设计了一台干扰用高重频双波长复合输出激光器。静态仿真了泵浦源效率、激光晶体受热和受力分布、激光高斯模式特征,得到了该激光器的复合输出特性。动态仿真调Q频率、倍频晶体长度对复合输出的影响以及分析倍频晶体热效应,发现在泵浦功率和谐振腔结构不变的前提下,需先满足基频光高重频工作,再优化倍频晶体长度和控制倍频晶体温度可提高倍频光的输出功率。按上述仿真结论开展的验证实验结果表明:当磷酸氧钛钾晶体长度为12 mm、输出镜透过率为10%、重复频率为50 k Hz时,设计的激光器基频光平均功率为18. 98 W,倍频光平均功率为2. 22 W,与仿真结论一致。     

B4C／Al复合板中应力波行为分析（Ⅱ）

在已建立的应力波传播模型和研究弹、板间作用力所获结果的基础上,为分析复合板应力的变化,对复合板弹板碰撞承受的应力进行了简化处理,根据应力波传播特性,确定了复合板内能量集中区域,研究了应力波在复合板巾的传播和能耗,并讨论了应力波对陶瓷的作用。通过近似计算,发现烧蚀消耗的弹丸动能较大,在复合板中,Al板的塑性变形吸收了19％的弹丸动能。     

基于表层及芯材阻尼特性的夹层结构导纳分析

针对复合材料夹层板结构,综合开展芯材材料阻尼特性动力学热分析(DMTA)试验、表层玻璃钢和芯材试件阻尼衰减特性研究,通过夹层板结构的模态激振试验得到结构的模态阻尼比。从结构动力学方程出发探讨了影响多自由度系统结构传递导纳的相关参量,试验对比分析了钢质板和复合材料夹层板两型结构的传递导纳特性,并研究了激振点与响应点间距对复合材料夹层结构传递导纳的影响。研究表明:当尺寸和边界条件相同时,影响结构传递导纳的主要因素是结构的固有频率和模态阻尼。试验还得到了复合材料夹层板较钢质板的基频提高值和传递导纳降低均值,该试验结果可为工程设计提供参考。     

断裂复合材料层压板贴片快速修复工艺研究

采用CMR-1A复合材料热补仪和3234/G814复合材料预浸料贴片,对完全断裂的复合材料层压板进行双面修复。通过正交试验法获得了最佳修复工艺参数:固化温度为130℃;固化时间为80 min;贴片层数为5层(单面);真空度为0.04 MPa;贴片长度为50 mm。对优化工艺参数进行试验验证,结果表明:复合材料层压板拉伸强度从0 MPa增加到320.84 MPa,提高了57.29%;LY12CZ铝合金和45钢板拉伸强度恢复率分别为96%和75.53%。     

FeAlCrNbB金属间化合物复合涂层的制备与表征

研究开发了一种FeAlCrNbB新型喷涂粉芯丝材,并结合自动化高速电弧喷涂工艺制备了该材料的复合涂层,分析了涂层的常规力学性能、组织结构和油润滑条件下的滑动摩擦磨损性能,并和常规FeAl涂层进行了对比。结果显示:FeAlCrNbB涂层具有相对较高的显微硬度和拉伸结合强度、低的孔隙率,组织致密,形成了由Fe-Al金属间化合物相、氧化物以及少量非晶和纳米晶组成的复合结构,由于这种复合结构的材料特征,使涂层具备较好的耐磨损性能。     

纤维缠绕复合材料管道等径三通的强度分析

根据复合材料强度准则中应用最广的Tsai—wu失效准则,利用ANSYS有限元分析软件,对纤维缠绕复合材料管道等径三通强度进行分析。分析结果表明,复合材料管道三通在承受内压时,在主管和支管的连接处会产生应力集中,纤维的缠绕方向不同三通的强度因子会各异,缠绕角在50°～60°时复合材料管道三通的强度最好,此结论可以为纤维缠绕复合材料管道三通的设计制造提供一种有效的参考。     

氧化铝气凝胶复合材料的制备与隔热性能

以仲丁醇铝为先驱体,采用溶胶一凝胶工艺制备氧化铝溶胶,并将其与无机陶瓷纤维毡复合经超临界流体干燥得到氧化铝气凝胶隔热复合材料.利用扫描电子显微镜(SEM)和氮气吸附等方法对样品微观结构进行分析,利用热平板法对材料的隔热性能进行测试,并分析了氧化铝气凝胶隔热复合材料隔热机理.研究表明:与氧化硅气凝胶相比,氧化铝气凝胶具有更好的耐高温性能,经1000℃热处理后仍然能够较好地保持其纳米多孔结构;将气凝胶与纤维复合后,充分发挥了氧化铝气凝胶优良的隔热特性,使得复合材料的隔热性能较纯纤维毡有了明显的改善,其热面温度1000℃时导热系数为0.0685 W/m·K.