面向访问模式的多核末级Cache优化方法

多核处理器架构已经成为当前处理器的主流趋势,应用程序中访问模式的多样性给多核处理器的末级Cache带来了许多挑战。提出了访问模式的多核末级Cache优化方法,它包含"可配置的共享私有Cache划分"、"可配置的旁路Cache策略"和"优先权替换策略"三个协同递进的层次。通过使用该方法,程序员能够灵活地改变末级Cache执行行为,从而高效地适应应用程序访问模式的变化。实验结果表明,提出的方法能够显著降低末级Cache的缺失率,进而提高系统的整体性能。     

求解武器目标分配问题的改进粒子群算法

在建立多种类型武器目标分配模型的基础上,提出了一种求解该模型的改进粒子群算法。首先,定义粒子聚焦距离变化率,使惯性权重依据聚焦距离变化率自适应调整;其次,采用速度最大值线性递减的策略平衡算法收敛精度与全局寻优能力之间的矛盾;最后,粒子替换策略使算法改善了因自适应惯性权重的引入而造成收敛速度变慢的问题。仿真结果表明,提出模型和算法合理有效,算法收敛快,适合求解各种种群规模的武器目标分配问题。     

毛泽东反腐倡廉思想的时代价值

毛泽东反腐倡廉思想是马克思主义基本原理与中国具体实际相结合的产物,它是对马克思主义的创造性发展。学习和研究毛泽东反腐倡廉思想,对于深入开展反腐败斗争和廉政建设,全面建设小康社会不仅具有深远的历史意义,而且具有重大的现实指导意义。     

The parallel replacement problem with demand and capital budgeting constraints

A generalized parallel replacement problem is considered with both fixed and variable replacement costs, capital budgeting, and demand constraints. The demand constraints specify that a number of assets, which may vary over time, are required each period over a finite horizon. A deterministic, integer programming formulation is presented as replacement decisions must be integer. However, the linear programming relaxation is shown to have integer extreme points if the economies of scale binary variables are fixed. This allows for the efficient computation of large parallel replacement problems as only a limited number of 0–1 variables are required. Examples are presented to provide insight into replacement rules, such as the “no‐splitting‐rule” from previous research, under various demand scenarios. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 40–56, 2000     

A comparative study of three tool replacement/operation sequencing strategies in a flexible manufacturing system

This paper studies three tool replacement/operation sequencing strategies for a flexible manufacturing system over a finite time horizon: (1) failure replacement—replace the tool only upon failure, (2) optimal preventive tool replacement for a fixed sequence of operations, and (3) joint scheduling of the optimal preventive tool replacement times and the optimal sequence of operations. Stochastic dynamic decision models are used for strategies 2 and 3. The optimization criterion for strategies 2 and 3 is the minimization of the total expected cost over the finite time horizon. We will show through numerical studies that, with the same amount of information, the total expected costs can be reduced considerably by choosing an optimal strategy. Our conclusion is that in flexible manufacturing, optimal tool replacement and optimal operations sequencing are not separate issues. They should be considered jointly to minimize the expected total cost. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 479–499, 2000     

遗传算法的预防性维修周期优化方法

考虑到预防维修可以提高系统生产效益的同时,故障率会随着维修次数的增加而上升,引入役龄回退因子对预防维修活动前后系统性能的动态变化进行描述;而且还充分考虑到系统预防维修周期随维修次数的变化情况,建立了系统预防维修周期优化模型,并将改进后的遗传算法运用于模型的优化求解.重点研究了系统总效益随预防维修次数的变化率, 从而有效地帮助决策者判定系统何时进行更新替换.     

Consequence of reinforced SiC particles and post process artificial ageing on microstructure and mechanical properties of friction stir processed AA7075

Friction stir processing and post process artificial ageing was successfully carried out on AA7075 with and without reinforcement of SiC particles producing defect free processed zone with uniform distribution of filler material. Effect of SiC particle reinforcement and artificial ageing times on the microstructural modifications was characterized using optical and electron microscopy, electron backscattered diffraction and X-Ray diffraction. Hardness, impact and wear tests were carried out to investigate mechanical behaviour before and after processing. Reinforcement of SiC particles during FSP and subsequent age hardening treatment brought about nearly twofold increase in hardness and impact toughness values by the combined effect of grain refinement, Zener pinning, dispersion strengthening and precipitation hardening. Significant improvement in wear resistance in terms of wear loss was also observed after processing compared to the reference material AA7075-T6. Fractured surface of post FSP age hardened AA7075 alloy exhibited features of ductile fracture during Charpy impact test.     

A bivariate optimal replacement policy for a cold standby repairable system with repair priority

In this article, an optimal replacement policy for a cold standby repairable system consisting of two dissimilar components with repair priority is studied. Assume that both Components 1 and 2, after repair, are not as good as new, and the main component (Component 1) has repair priority. Both the sequence of working times and that of the components'repair times are generated by geometric processes. We consider a bivariate replacement policy (T,N) in which the system is replaced when either cumulative working time of Component 1 reaches T, or the number of failures of Component 1 reaches N, whichever occurs first. The problem is to determine the optimal replacement policy (T,N)* such that the long run average loss per unit time (or simply the average loss rate) of the system is minimized. An explicit expression of this rate is derived, and then optimal policy (T,N)* can be numerically determined through a two‐dimensional‐search procedure. A numerical example is given to illustrate the model's applicability and procedure, and to illustrate some properties of the optimal solution. We also show that if replacements are made solely on the basis of the number of failures N, or solely on the basis of the cumulative working time T, the former class of policies performs better than the latter, albeit only under some mild conditions. © 2010 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

Asymptotic properties of imperfect repair models and estimation of repair efficiency

The aim of this articles is to study the asymptotic behavior of two imperfect repair models, called Arithmetic Reduction of Intensity and Arithmetic Reduction of Age models. These models have been proposed by Doyen and Gaudoin (Reliab Eng Syst Safe 84 (2004) 45–56) and include many usual virtual age models. First, it is proved that the failure intensity of these models is asymptotically almost surely equivalent to a deterministic increasing function with a cumulative error proportional to a logarithm. Second, the almost sure convergence and asymptotic normality of several estimators of repair efficiency are derived, when the wear‐out process without repair is known. Finally, the coverage rate of the asymptotic confidence intervals issued from those estimators is empirically studied. © 2010 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

油罐惰化置换时间的数学计算与模拟实验

基于对油罐惰化置换过程的假设和简化,得到惰化置换时间的计算公式,然后通过对计算公式的修正,完成了对油罐惰化置换时间的计算。最后通过对3次不同流量条件下模拟实验数据的非线性拟合,分别计算出3次实验气体扩散系数的取值,得到O2体积分数与置换时间之间的完整表达式。数学计算和实验的方法与结论将为进一步研究油罐油气的惰化置换规律提供有价值的参考。