攻击机突防链型国土防空系统效能分析

封锁式防空和阻击式防空一般采用火力区相互接壤而形成链式防空,链式防空用于疆土防御.根据防空系统的任务和规模(国土防空、部队战场防空、海上舰队防空)以及入侵方式、武器性能特点的不同.基于随机理论建立了敌方采用同类武器组成链式防空体系,攻击机采用火力对抗条件下的国土突防模型.对基于随机理论的攻击机突防链型国土防空系统效能进行了一些假设和简化,建立了初步的效能模型,提供了一个分析的思路和方法.     

陆基常规导弹武器系统射击效率评估

现行的陆基常规导弹武器射击效率的算法原理滞后于导弹作战实际需要.针对毁伤律问题、积累毁伤效应问题、相关性问题、目标毁伤的模糊性问题进行了探讨,指出应用当代新的数学理论方法改造现行陆基常规导弹射击效率算法理论的必要性和迫切性.     

超视距引导攻击误差计算

先敌发现,先敌攻击,争取先机制敌,是导弹攻击的重要原则.实施超视距导弹攻击,关键在于引导兵力的准确的引导.超视距引导的导弹攻击,导弹对目标的捕捉能力取决于引导配系的引导精度和导弹本身的技术、战术性能.提出了影响舰舰导弹超视距攻击误差的三要素,给出了导弹射击概率偏差的计算方法,并就对平台延伸定位法,反向延伸平台定位法和GPS定位法的定位误差进行分析,指出了引导站的安全角的实际运用中的作用.     

末端反导组网作战战术信息分发系统结构研究

战术信息分发系统是末端反导防空导弹组网作战系统的重要组成部分,是末端反导防空导弹组网作战各系统实现互连、互通、互操作的关键.首先分析了战术信息分发系统的概念、内涵、系统的功能以及与一般通信系统的不同,其次依据末端反导防空导弹组网作战系统的体系结构,构建了末端反导组网战术信息分发系统,分析了该系统的逻辑结构、逻辑流程以及物理组成,最后对该系统今后的发展建设提供了几点启示.     

动态贝叶斯网络的无人机炮火校射

动态贝叶斯网络(Dynamic Bayesian Networks-DBNs),是对具有随机过程性质的不确定性问题进行建模和处理的一个有力工具.提出将隐马尔可夫模型(Hidden Markov Models-HMMs)图形模式与贝叶斯网络结合起来构成DBN,将其用于无人机照相侦察情报的推理分析,决定炮火优先打击区域.首先建立动态贝叶斯网络的战场态势变化模型,而后应用HMM的推理算法获得当前隐含序列最优估计,且可预测出未来战场态势.最后应用模糊推理获得优先打击的区域号.仿真结果表明了模型的可行性.该方法有效解决了贝叶斯网络对于瞬间变化战场态势推理的不足的缺陷,为炮兵指挥员更好地运用火力,分出主次奠定了基础.     

基于故障树分析的航空装备体系结构贡献率评估方法

针对航空装备体系构成复杂的特点,将故障树分析引入航空装备体系结构贡献率评估问题,提出基于故障树分析的评估方法.从作战装备、信息支援装备和保障装备三个方面构建航空装备体系结构,建造航空装备体系结构故障树;采用底事件的关键重要度指标来计算航空装备的体系结构贡献率,建立基于关键重要度的航空装备体系结构贡献率评估模型;以某航空...     

多点喷射空气酒精燃气发生器试验验证

为有效解决现有燃气引射气源存在的诸多缺点,适应一种引射系统大流量、小型化的需要,在综合分析各燃气引射气源方案的基础上,研制了一种以空气、酒精作为推进剂的多点喷射结构的燃气发生器,并开展了多种工况下的试验研究。结果表明:采用的多点喷射方案大大提高了空间利用率,有效满足了引射系统小型化的要求;喷雾性能好,喷雾锥角及粒径优于设计指标要求;点火可靠性高,解决了领域内现有燃气发生器点火可靠性低的缺点;点火迅速,燃烧平稳,可实现较为均匀的出口温度场;燃气发生器工作范围较宽,能在余气系数2.52～4.34范围内稳定燃烧;高效的火焰筒内壁空气冷却方式有效保证了燃气发生器长时间工作运行。     

酚醛-石英混杂纤维增强苯并噁嗪复合材料高温失效特征

通过模压工艺制备了酚醛-石英混织纤维增强苯并噁嗪复合材料(P-Q/BZ)试样,考察了其力学性能、烧蚀性能和耐冲刷性能,分析了该试样在高温环境中的主要失效特征,研究其在高温环境中的适用性。结果表明,未经热处理的P-Q/BZ试样平均弯曲强度、弯曲模量和层间剪切强度分别为283 MPa、10.8 GPa和22.6 MPa;经300℃,N_2处理15 min后,试样均匀膨胀,厚度增加22%,弯曲强度、弯曲模量和层间剪切强度分别下降58%、41%和58%;在氧乙炔焰的平均质量烧蚀率和线烧蚀率分别为0.048 4 g/s和-0.081 mm/s,烧蚀后试样宏观不分层,表面炭层微观分层严重,酚醛纤维热解炭、树脂基体热解炭、熔融石英纤维以及碳硅氧化产物相互分离;该试样耐冲刷能力差,在发动机尾焰烧蚀平台模拟的热-力耦合环境中的质量损失率高达59%。P-Q/BZ复合材料需要解决热解膨胀问题,进一步提高抗冲刷性能。     

Experimental research on the instability propagation characteristics of liquid kerosene rotating detonation wave

In order to study the instability propagation characteristics of the liquid kerosene rotating detonation wave (RDW), a series of experimental tests were carried out on the rotating detonation combustor (RDC) with air-heater. The fuel and oxidizer are room-temperature liquid kerosene and preheated oxygen-enriched air, respectively. The experimental tests keep the equivalence ratio of 0.81 and the oxygen mass fraction of 35% unchanged, and the total mass flow rate is maintained at about 1000 g/s, changing the total temperature of the oxygen-enriched air from 620 K to 860 K. Three different types of instability were observed in the experiments: temporal and spatial instability, mode transition and re-initiation. The interaction between RDW and supply plenum may be the main reason for the fluctuations of detonation wave velocity and pressure peaks with time. Moreover, the inconsistent mixing of fuel and oxidizer at different circumferential positions is related to RDW oscillate spatially. The phenomenon of single-double-single wave transition is analyzed. During the transition, the initial RDW weakens until disappears, and the compression wave strengthens until it becomes a new RDW and propagates steadily. The increased deflagration between the detonation products and the fresh gas layer caused by excessively high temperature is one of the reasons for the RDC quenching and re-initiation.     

Novel approach for active vibration control of a flexible missile

This paper investigates the feasibility of using an active dynamic vibration absorber (ADVA) for active vibration control of a flexible missile system through simulation. Based on the principles of a dynamic vibration absorber (DVA), a ring-type ADVA is first designed to attenuate the elastic vibration of the flexible missile, and the design of the active controller adopts the proportional-integral-derivative (PID) control algorithm. The motion equations of a flexible missile with an ADVA, which is subjected to follower thrust at its aft end, are derived using the Lagrangian approach. Taking the minimum of the root mean square (RMS) of the lateral displacement response of the center of mass as the objective function, a genetic algorithm (GA) is used to optimize the parameter of the DVA and PID controller. The numerical calculations show that the ADVA and DVA are effective in suppressing the vibration and provide approximately 41.2% and 17.6% improvement, respectively, compared with the case of no DVA. The ADVA has better performance than the DVA. When the missile is subjected to follower thrust, the effect of vibration reduction is more effective than the case without follower thrust. It is feasible to reduce vibration and improve the stability of flexible missiles by means of the ADVA.