中口径舰炮对空闭环校射

首先建立了中口径舰炮武器系统对空闭环校射数学模型,比较新颖地解决了波门指示、弹序判别、滤波方法、脱靶量的求取和预测以及漏测弹丸的措施等一系列问题,通过仿真模拟明显地提高了系统精度和命中率,并使其工程化嵌入某型航炮系统,在工程上得以实现     

野战防空C3I系统的目标指示雷达测量误差对目标火力分配的影响

以某野战防空Ｃ３Ｉ系统为背景,针对目标雷达的测量误差对系统目标火力分配的影响进行了分析,在系统分别配置警１７雷达和３８７雷达的情况下,通过仿真给出目标落入武器单元火力范围的最大概率和概率分布曲线图,提出系统建模应考虑的一些因素,为大系统的性能分析和总体建模奠定了基础     

振荡器相位噪声对GNSS接收机载波跟踪数字锁相环性能的影响

关于振荡器相位噪声引起的GNSS接收机载波跟踪数字锁相环相位抖动,目前的解析结论仍是基于模拟锁相环的,不能说明相位抖动大小与中频积累时间的关系,因此不能有效指导高灵敏度、高精度载波跟踪锁相环参数设计.本文首先推导中频积累输出的频率白噪声、频率游走噪声序列的功率谱,然后基于数字二阶锁相环离散线性模型导出了环路相位抖动公式并进行了仿真验证,最后对公式进行了解析和数值分析.分析结果表明:频率白噪声、频率游走噪声引起的二阶载波跟踪锁相环相位抖动,均随中频积累时间单调递增,随环路带宽先递减后递增.本文推得的相位抖动公式及其随参数变化特征的分析结论,可用于具体指导GNSS载波跟踪锁相环参数设计.     

偶变元MAI旋转对称布尔函数

代数免疫度是布尔函数的一个重要密码学指标.给出了具有最大代数免疫度的偶数元旋转对称布尔函数的两种构造方法.进一步地,研究了特殊情形时所构造的旋转对称布尔函数的非线性度,当n≥18时,构造3得到的MAI旋转对称布尔函数的非线性度优于已知构造的偶数元MAI旋转对称布尔函数的非线性度.     

代数免疫度最优的旋转对称布尔函数的构造

代数免疫度是布尔函数的一个重要密码学指标,为了抵挡代数攻击,密码算法中所使用的布尔函数应当具有较高的代数免疫度.本文利用“轨道交换”技术,给出了一类具有最优代数免疫度的旋转对称布尔函数的构造,该类函数对于代数攻击具有较强的抵抗能力,同时具有较高的非线性度和最优代数次数.     

Signal‐to‐interference‐plus‐noise ratio estimation for wireless communication systems: Methods and analysis

The Signal‐to‐Interference‐plus‐Noise Ratio (SINR) is an important metric of wireless communication link quality. SINR estimates have several important applications. These include optimizing the transmit power level for a target quality of service, assisting with handoff decisions and dynamically adapting the data rate for wireless Internet applications. Accurate SINR estimation provides for both a more efficient system and a higher user‐perceived quality of service. In this paper, we develop new SINR estimators and compare their mean squared error (MSE) performance. We show that our new estimators dominate estimators that have previously appeared in the literature with respect to MSE. The sequence of transmitted bits in wireless communication systems consists of both pilot bits (which are known both to the transmitter and receiver) and user bits (which are known only by the transmitter). The SINR estimators we consider alternatively depend exclusively on pilot bits, exclusively on user bits, or simultaneously use both pilot and user bits. In addition, we consider estimators that utilize smoothing and feedback mechanisms. Smoothed estimators are motivated by the fact that the interference component of the SINR changes relatively slowly with time, typically with the addition or departure of a user to the system. Feedback estimators are motivated by the fact that receivers typically decode bits correctly with a very high probability, and therefore user bits can be thought of as quasipilot bits. For each estimator discussed, we derive an exact or approximate formula for its MSE. Satterthwaite approximations, noncentral F distributions (singly and doubly) and distribution theory of quadratic forms are the key statistical tools used in developing the MSE formulas. In the case of approximate MSE formulas, we validate their accuracy using simulation techniques. The approximate MSE formulas, of interest in their own right for comparing the quality of the estimators, are also used for optimally combining estimators. In particular, we derive optimal weights for linearly combining an estimator based on pilot bits with an estimator based on user bits. The optimal weights depend on the MSE of the two estimators being combined, and thus the accurate approximate MSE formulas can conveniently be used. The optimal weights also depend on the unknown SINR, and therefore need to be estimated in order to construct a useable combined estimator. The impact on the MSE of the combined estimator due to estimating the weights is examined. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

运载火箭姿控系统三通道Simulink建模与仿真分析

以某运载火箭为例,介绍了将姿控系统数学模型转化为Simulink三通道仿真模型的方法和过程;在仿真过程中涉及到时变系数的瞬时时间固化法,分析由此引起的计算数据局部振荡,并提出解决办法;分析了用Simulink为该大型系统建模时所遇到的代数循环问题,并加以解决。     

基于虚拟脱靶量预测的准闭环校射方法

针对传统高炮大闭环校射脱靶量不易检测、可校射时间短暂,提出了一种基于虚拟脱靶量预测的准闭环校射方法。首先给出了弹丸双站角度测量的初始状态估计算法;其次,结合外弹道理论建立了一种虚拟等距脱靶量的预测模型,分析了射击校正量的估计方法与准闭环校射方案的实现流程。该方法避免了大闭环校射对脱靶量的直接检测,并提高了高炮闭环校射的时效性。     

低阶像差校正的压电驱动变形镜测试与仿真优化

光纤激光器输出光束带有波前畸变,制约了光学系统的性能和工作效率。搭建实验系统分析了超连续谱光纤激光器系统输出光束的像差特性,不同波长的滤波片测试像差均以离焦为主。根据这一特点制备了3单元单层横向压电驱动变形镜样镜,并进行特性测试。变形镜影响函数有限元仿真和实测吻合度可达77%以上,一阶谐振频率12. 1 k Hz。以实际像差为对象进行闭环仿真,校正精度达到0. 77。另外,从校正精度及行程两个方面对变形镜进行了有限元优化仿真。结果 9单元变形镜(有效口径7. 5 mm)校正精度达到0. 9左右。镜片与压电片厚度比存在最优值约0. 3,行程可提升60%以上。     

自由曲面逆向工程中的区域性再设计方法

针对自由曲面逆向工程的再设计,提出了区域性再设计方法。此方法的思想是通过调整1个控制点,使得一定区域内的多个控制点按照某种规律随之变化,从而可以实现曲面再设计的要求。基于此思想,给出了区域性再设计方法的理论推导,并进行了实例仿真验证。